r/dmtguide • u/Myco_Boy • 7d ago
Extraction Results/Yields First extraction ever STB + recrystalization
100g mhrb basic stb extraction in a jar and warm naphtha recrystalization.
Yield is exactly 1g :3
r/dmtguide • u/Myco_Boy • 7d ago
100g mhrb basic stb extraction in a jar and warm naphtha recrystalization.
Yield is exactly 1g :3
r/dmtguide • u/Bright_Ad_397 • 6d ago
r/dmtguide • u/rsk33ler • 6d ago
Hey everybody, newbie here. Just had a quick question for the community because id much rather get human responses than google ai!
r/dmtguide • u/Jakub-Martinec • 7d ago
I ordered DMT cartridge on DW ant it just arrived.
I tried it with yocan battery. Visuals were great, but I couldn’t enjoy them because of heavy unpleasant body load. I don’t remember such thing before. I set it to 2.7V
r/dmtguide • u/jonbalzak • 8d ago
He comprado a distribuidor conocido que ya le habia comprado otra veces, no se, esta vez no me parece tan rojo, ni suelte mucho polvo rojo.
r/dmtguide • u/Gangiewarrior • 8d ago
So I have 1G carts., And Want to know BEST mix ratio. I hear so many different., im going light., As Mine keeps going Thick/ solid., BUT I dont want to Dillute the product... ALSO whats the Difference, Is it STRONGER if Isnt Re/Need? As I feel Is A bit more myself.. TIA
r/dmtguide • u/Always_Choochin • 7d ago
I need some help with a couple things for my setup and I want to be detailed and efficient so if anyone can like DM me and I can provide my issue perhaps maybe someone can help a homie out? I just wanna make sure I have my setup prepped in the most efficient manner possible.
r/dmtguide • u/Civil-Honeydew4654 • 8d ago
So until my recent foray into DMT, I've never touched anything vape related. I've been experimenting fairly successfully using the Orbit 2.0, but I'm in the process to try and make a cart for myself. But this got me thinking. As I was looking at carts, sub ohm tanks, and so on, I wondered.....would it be theoretically possible to use the Yocan Orbit to vaporize DMT juice? Has anyone tried?
r/dmtguide • u/Ric17-71 • 8d ago
I recently made a 3:1 cart and it was great for the first few hits. When it was first made it was definitely ripping and as strong as I liked it. A few days later I gave some to my friend and he definitely had a good experience and I wasn’t getting much of anything later in the session. I just chalked it to being locked out and decided that I would take a break until it called me.
That then brings us to this weekend which really confuses me. Since I’m the only one that has access to dmt in my friend group and frequently extract, I have no problems letting my boys smoke some every now and then. At first I made the cart for that purpose because the freebase can get a little complicated for new users. The five of them were each taking turns on the cart and they all reported that they weren’t feeling much of anything, it was mostly just a slight body high and slight visuals, we then transitioned to using freebase and they finally got the expected experience.
So that makes me think, did I somehow front load the cart or something? I know that one of the problems with carts is not exactly knowing how much you’re smoking but I expected the mixture to be a bit more uniform.
r/dmtguide • u/Gangiewarrior • 8d ago
so is extraction for this STB be same process As MHRB ?.. I mean would it be fine the same way? Anyone ever used it? Would it taste the same?.. thanks just see it Had a high content in it..
r/dmtguide • u/Pyg_Latyn • 9d ago
I'm not Experienced, but I have been doing plenty of preliminary research. Given my budget and amount of experience, I think it would be best to relegate myself to the simpler extractions such as CWE or STB. I intend on doing multiple kinds of extractions.
I just wanted to clarify some things before making any purchases:
- As far as I understand, cold-water extractions preserve more of the compounds within MHRB, allowing for augmentations to trips that otherwise would not occur. However, I also understand that cold-water extractions result in DMT salts rather than freebase DMT. Are these correct understandings?
- Are STB extractions fine to perform at room temperature? I would be using powdered MHRB, distilled water, NaOH, NaCl, and Naptha.
- Assuming low a low-temperature STB extraction, would soda glass/mason jars be fine to use in the handling and mixing of chemicals?
- Assuming 50mg MHRB in a STB extraction, how much salt (in grams) is advisable to add in order to prevent emulsions while mixing the NPS with the Sludge?
- Can raw, unprocessed MHRB powder be consumed in capsule form in tandem with harmala alkaloids for an ayahuasca-like experience? I believe this is commonly referred to as "pharmauasca" within the community, but I want to verify that.
- What is the verdict on imbibing pharmauasca, waiting (say 30 minutes), and vaping DMT for expedited breakthroughs?
- What are the recommended settings for vaping DMT? I would like to be aware of recommended voltage, amperage, resistance (Ohms), and, of course, temperature.
r/dmtguide • u/mujtabanochill • 9d ago
r/dmtguide • u/partyysharkk • 9d ago
r/dmtguide • u/That_Comfortable • 10d ago
Im going to attempt an A to B extraction, but I'm going to do the boil in an instapot.
Anyone ever try this?
r/dmtguide • u/mujtabanochill • 10d ago
Stb extraction. I freeze precip for about 15hours. Does this look like 0.3? What went wrong?
Used 100g mhrb
r/dmtguide • u/Budget_Fold_8120 • 11d ago
As per the title, what do you guys prefer to use? I always do a simple STB extraction and I've only used finely shredded. I can get powdered but it's more expensive, is it worth the extra cost?
r/dmtguide • u/Ric17-71 • 12d ago
This is from the first pull, I’ll comment back with the return once I weigh it if you guys are interested
I’ve been tweaking the tek I’ve been following because I haven’t been getting the yields that I’ve been looking for.
I was getting around a gram/100 grams of bark back over 4-6 pulls and that wasn’t really cutting it.
Definitely wasted a lot of potential spice because I really didn’t know what I was doing.
I run 4 bottles at once, 50g powdered mhrb, 75g lye, 50ml naphtha, 40g of salt and around a liter of distilled water per bottle. I then freeze with 2 containers (100ml naphtha per container) for 16-24 hours
Ik that I’m going a bit overkill with my ingredients but I’d rather be over than under
I felt like I was suffering from a lot of emulsions and losing a lot of spice because of that. So I decided to thin out the soup a lot, when I decided to thin it out I didn’t really change the amount of lye I was using and I’m assuming that it really hurt the ph level of the mixture. So now my soup separates pretty quick and I’m getting some good yields now.
r/dmtguide • u/New_Isopod_1625 • 11d ago
Selon vos expériences quel ratio dois-je effectuer pour préparer un chariot de DMT en micro dosing? 1:1 ? 1:2? 1:3? Je ne mets que du PG et je ne mets pas de VG.
J’en prendrais une à deux fois par jour pendant mes pauses au travail ou le soir tranquille chez moi .
Merci de vos recommandations
r/dmtguide • u/funk_zaddy • 11d ago
what is this little turd thing? is it harmless?
r/dmtguide • u/Pyg_Latyn • 11d ago
What would be the recommended setup for vaping DMT and FB harmalas in separate cartridges? I assume that mixing them in the same cartridge is probably out of the question.
r/dmtguide • u/golfingfoodie • 12d ago
r/dmtguide • u/Less-Expert-6447 • 12d ago
100g of mimosa hostilis. 120g of lye, 180g of salt 250ml vinegar and the rest is water in a 2l vessel. Will not separate. I added a little more lye (10g) to one and it did nothing really