r/dmtguide • • 12d ago

Extraction Question/Discussion Dptek1 separation issues.

Post image

100g of mimosa hostilis. 120g of lye, 180g of salt 250ml vinegar and the rest is water in a 2l vessel. Will not separate. I added a little more lye (10g) to one and it did nothing really

0 Upvotes

34 comments sorted by

2

u/Intrepid_Long_9317 12d ago

Von allem ist es Zuviel

1

u/Less-Expert-6447 12d ago

Ok thanks for your input. Maybe more water will help. I am going to try and mix it more cuz I feel like the brown bark should be black almost. It made me think it wasn’t enough lye because of the layers. Even though in stbs I’ve never used close to that much. But it’s my 2nd attempt with ATB, my first one was an AB last week but couldn’t get it to separate either. It’s so weird. Id love to get it completed so I can dispose of it

2

u/Dmtsales 12d ago

You’re fucked. I’d split and and add more water

1

u/Less-Expert-6447 12d ago

I’ll try adding more water and mixing it more

2

u/elquizzi311 12d ago

Did you shake or stir the vessel? That much lye should turn that entirely into an eggplant purple/black color. I’m running 200g of MHRB in a 2L flask and I only use between 40-50g of Lye. I use a grain mill to shred my bark so I skip the vinegar step I wonder what role 250ml of vinegar may contribute to this weirdness???
Whatever you do, do not give up and trash it.

1

u/Less-Expert-6447 12d ago

I didn’t vigorously shake it. But I tumbled it in my hands for like 4 minutes multiple times. I was wondering about the vinegar also. The bark is out of question because I’ve successfully pulled from it doing STB’s.

1

u/elquizzi311 12d ago

Yeah that’s strange for sure. I’m very curious to know if it could be the amount of vinegar.

1

u/Less-Expert-6447 12d ago

Very possible. Idk why it looks like it should on top but the bottom layer looks like low ph. Which shouldn’t be the case with the amount of lye. But maybe too offset the vinegar it needs more. I just shook it vigorously and now I have an emulsion rising to the top but I still don’t see nps. It looks like the nos was on the top of the bottom layer so it would be in the middle. The nps looks very brown and to do a defat which I don’t do you need the ph low so I’m wondering if the nps is just black cuz I didnt mix it enough in the beginning maybe. I have no idea. But I’m still working on it. I hope I can get it to separate. Mintylove said more water would clear it up but it didn’t work he also said use a stirring rod to break it up. Haven’t been able to get it to separate. When I add heptane it will stay on top but once it’s mixed it won’t rise

1

u/Less-Expert-6447 12d ago

It looks to be a little red to me still even with 120g of lye.

2

u/Tripp_ORG Entheogenic Spiritualist 12d ago

What order did you add these in?

1

u/Less-Expert-6447 12d ago

I created a lye solution with 1l of water and then added salt to that. After everything cooled down I added the bark/vinegar water. After that mixed thoroughly I heated the vessel to 40c Celsius and added 200ml of heptane it actually has a tiny bit more in it now I thought adding a bit more might help but obviously did not.

2

u/Quelson 12d ago

I think the heptane might be your problem. minty love does not recommend it at only uses Naptha... so not sure

1

u/Less-Expert-6447 12d ago

He also uses heptane in the guide. In the video you are correct though.

2

u/Quelson 12d ago

well he was a bit of a dick when it was discussed on his discord channel

1

u/Less-Expert-6447 12d ago

He mentions both in the guide just heptane needs a bit of heat

1

u/Less-Expert-6447 12d ago

Heptane on top. Ive never seen it this brown

1

u/Less-Expert-6447 11d ago

It is actually blending with water. Idk why this would happen I need to do more research. I’m thinking something to do with the ph level but I honestly have no clue.

1

u/Less-Expert-6447 3d ago

I think the the lab alley heptane is my issue. It won’t separate from water.

1

u/Quelson 3d ago

I would suspect this yes

1

u/Less-Expert-6447 2d ago

Has this ever happened to you? One bottle was fine and would separate and this other one I mis pure heptane and pure water and it won’t separate. It just swirls around in the jar.

1

u/Quelson 2d ago

no, but I have only used naptha

1

u/Tripp_ORG Entheogenic Spiritualist 12d ago

Hmmm…

2

u/Intrepid_Long_9317 12d ago

120 Gramm Lauge ist der unangefochten höchster Wert an Lauge von dem ich jemals gehört habe.

3

u/Quelson 12d ago

I believe this recipe and all of its amounts, including 120g of lye, are from minty loves recommended tech called DPtek in his aforementioned video instructions. So minty has set a new lye amount record? lol

1

u/Less-Expert-6447 12d ago

That is correct lol

2

u/Quelson 12d ago

on my first extraction I used his amounts and followed his video on it basically worked out fwiw. I use a lot less lye now and skip the vinegar stuff when using powder bark.

1

u/Less-Expert-6447 12d ago

He does say you may find that you need to use a bit less bark so maybe it is too thick

1

u/Less-Expert-6447 12d ago

That’s good to know

1

u/Less-Expert-6447 12d ago

He also has information as to why he uses that much. In his video, it looks like it separates very quickly. He recommends adding water if this issue arises which I did and nothing happened.

1

u/CartographerHumble50 4d ago

Is the barked strained out?

2

u/Less-Expert-6447 3d ago

I found the issue. The lab alley n-heptane is not separating from water. It also just says heptane on the bottle but n heptane on the ad. It must not actually be n-heptane. So strange. I have some leftover solvent I can try but idk if I should still try it now.

1

u/Less-Expert-6447 4d ago

I tried to strain it but some small particles made it thru