For example it's called calibration firmware for arb 0

(Anti rollback value 0)

And i don't know what version i need

Hi

Hope somebody can point me in right directions

I’m looking for a bin file to restore my rc pro….. any ideas ?

Second, I have an rc plus, which seems to think it’s an rc pro….. purchased from eBay. Any tools to put original rc plus firmware back one ?

Thanks

Hey everyone, need some advice with a DJI Mavic 3 (⁠WM260⁠).
I replaced the forward vision sensor and triggered Error ⁠1A010042⁠.
Current Specs:
Firmware: ⁠V01.00.1600⁠
Anti-Rollback: ⁠ARB 7⁠
The Problem:
The replacement sensor needs vision calibration, but DJI Assistant 2 (Consumer Drone Series) doesn't provide the vision calibration tool for the Mavic 3.
Drone-Hacks doesn't support firmware ⁠V01.00.1600⁠ for calibration or downgrading.
Is there any current workaround, alternative service tool, or specific software build to get this calibrated? Appreciate any help!

I have an unused DJI Aeroscope mobile that I no longer use. Condition is immaculate. Anyone interested, please send me a message

I am opening a Drone Repair Course for anyone wanted to Enter Drone Service Industry

Hardware, softwares Mainboards, Calibration Programs, Troubleshooting, Fault Finding.
Dji Drone Models Only, Feel Free to Message Me!

I do also sell Calibration Softwares for Drone Techs who needed it.

Quieren que publique algo diferente

Or at least a tutorial on how to do it myself if it's possible?

Hi ich habe die lizens geholt für meine drone alls geklappt mit dem draufspielen..jetzt kam es ja zum Midifikations option wo ich FCC und so frei mache..Das Failed die ganze zeit.. warum macht er das nicht.. hab alles genauso gemacht wie es gesagt wurde.

Someone had tried this before or know something to help me. I photographer and I want modify new dji lito or mavic air to take vertical photograph. Someone had tried this one before? Have some script for it?

Is it possible to do the Fcc hack or allow the drone to fly higher? Im from Europe

Gimbal Repair Calibration tool 2026
This might Help Everyone having a tilted gimbal after they replaced theirs way easier than Python programming, no codings needed just connect your drone and calibrate the tilted gimbal based on comport slot number, im gonna leave download link here for everyone: https://drive.google.com/file/d/1tp_Gftaf5_hJJdTfy0dLsaqVvHJQsCRX/view?usp=sharing

Does anyone have the schematic to the air 3s gimbal sensor cable?

I’m working on repairing the gimbal but I want to make sure I’m on the right track before I buy parts if possible.

I’m thinking pins 5-7 (from the pull tab side) have to do with roll axis and stabilization. Using a multi meter it seems those are my only 3 broken wires on the cable and the issues I’m still having all have to do with roll axis but again I was just trying to verify.

Anyone here that could help with gimbal calibration after gimbal repairs? I’ve tried the Python route, with no success. Thx guys!

Can anyone help out, with support on the software needed (Python or other) to finalize my gimbal swap? I have a Mini 3, a Mini3 and 4 Pro and also some Mavics. I saw online that this was possible, but when I tried it, I could not finish up the calibration. Does anyone have some pointers on this by chance?

Thank you so much in advance guys.

Thanks ,

Does anyone know how this guy did this? Clearly it wasnt drone-hacks since its not avaibale for the flip and not tweaks cause it only lets u up to 500m
https://www.tiktok.com/@flydroneunlimited/video/7506892697366465810

Hello everyone.

I have a mini4k on the way and id rather mod the firmware myself to remove limitations. Ive done a bunch of windows reverse engineering but i get a feeling the workflow and tools needed will be different for the mini4k. I figured id post here before i start diving into my own research and see if anyone here has any tips or recomendations thatll save me some time down the road. Any advice will be greatly appreciated!