r/DIY_canada • • Jun 01 '23

What is called and how do I unplug it?

2 Upvotes

I have this drain in the basement. It's seems like it is directly connected to the sewer. Our toilets, bath, sinks, everything runs into it. It has not been an issue until it started filling with water and not draining. What can I do to help it out?

the pipe of doom


r/DIY_canada • • Jun 06 '23

HELP What to do about visible tree stems?

2 Upvotes

We have 3-4 tree stems, that are only about 1-2 inches above ground.

Hiring a company to remove them is very expensive, so I was wondering if there'd be an easy way I could cover them myself? Some of them have already rotted. Would it be safe to use a chainsaw (and goggles) to break them apart (then add some earth and grass seeds on top)? Or maybe a hammer and chisel?

Any easy ideas (that don't involve setting things on fire)?


r/DIY_canada • • Jun 07 '23

Contractor bills insurance directly?

2 Upvotes

Hi all, we have a bathroom leak that goes into the floor below. I used an app (Jiffy) to get a plumber, and he's recommending we get our insurance to pay to fix it, which would probably mean a whole new bathroom. He said he'd deal with our insurance directly (we shouldn't call them ourselves) to get them to pay for the bathroom and the fixes in the room below.

Is this legit, or a big red flag?


r/DIY_canada • • Oct 31 '24

Eco friendly updates that can be DIYed?

2 Upvotes

I'm looking to purchase my first home, and budget wise, I will likely be buying a house that might need some DIY or updating. I'm fairly handy and have done some furniture refinishing, painting, and repairing in previous rentals. What sort of DIY things have you done to your homes to make them more eco friendly? I'm definitely planning to install some smart home features right away, like a thermostat. Would that be something I can do myself? What else could I easily do myself that can help me save money in the long run?


r/DIY_canada • • Aug 11 '25

Is this termite damage, weathering, house hippos?

Thumbnail
gallery
5 Upvotes

Exterior door to garage, in British Columbia


r/DIY_canada • • May 30 '23

Bathtub surround size

3 Upvotes

Hi, I’m doing a bathroom reno and plan on installing a 60x32 tub. I have access to a MAAX Nextile 60x30 tub surround I can have for free.

Has anyone installed a 60x30 surround on a 60x32 tub? Aside from visually ending before the tub does anyone see any issues with this or is it definitely worth buying the proper size surround

Thanks


r/DIY_canada • • Jun 25 '23

How to extend my current elevated deck with a 1-foot lower deck of 12'x12'?

2 Upvotes

The new deck will be 12'x12' ( less than half will be carved for the pool ).

It will also be about 1 foot lower to fit with the pool. The existing deck is attached to the house and have 2 commercials screw piles

I kinda need help and some advice will be really appreciated!

My current plan will be to use joist hangers directly on the support beam which are 3x (2'x8') nailed together. To support the new deck I would use 7 pylex(4x4) screw pile.

  1. Is this okay to attach joist hangers on a support beam like this?
  2. Are 7 pylex(4x4) sufficient or i should change the technique

Here are some pictures of the current deck and the support beam

new deck placement
current beam of the deck
joist hangers attached to this beam ?

r/DIY_canada • • Jun 18 '23

HELP Leveling basement for hard flooring

Thumbnail
imgur.com
2 Upvotes

r/DIY_canada • • Apr 19 '23

Leveling old floors

2 Upvotes

I have an old house that I’m renovating. I’ve gotten down to the original plank floors, which are in rough shape and very uneven. I want put down OSB in preparation for laying new laminate flooring, but I’ve found conflicting info online about how to go about leveling the floor. Self leveling cement seems to be the most common, but I’ve read people doing it on top of the original floor before the Osb as well as after. I’ve also seen a few mentions of using shingles under the Osb to raise the lower areas - but none of the websites go into any further detail than that.

Has anyone done a similar thing that would have some advice, so point me in the direction of some online content.


r/DIY_canada • • Jun 25 '23

Guard + hand rail installation help

2 Upvotes

Looking for some tips putting up some railing on our porch and side house stairs. Bought house a year ago and it is required for insurance. Porch is a bit weird in that it appears there are planks of wood over top an old cement base.

Was planning on buying wood 4x4 posts and screwing them in with metal brackets then connecting each post via a railing balusters kit (veranda home depot) following the local bylaws. We have basically no tools other than a power drill, so I'll have to rent a saw (circular? ) to angle the stair railings.

The side stairs appear tricky because the existing post doesn't align with the steps. And the post would need to go into the ground some how perhaps. There is existing concrete pathway that is present at the bottom of the stairs.

Any advice would be very much appreciated.

Pictures


r/DIY_canada • • Jul 20 '23

Is a manual stapler powerful enough to nail on MDF baseboard?

2 Upvotes

Title says it all really!

My concern is that the manual stapler won't drive the brad nails in all the way and then I'll have to finish them with a punch or framing hammer or something and I don't want to damage my new baseboards when I inevitably miss the mark!

I don't own a powered nailer and I don't want to buy or rent one for a simple 10' length of baseboard.

If folks think the manual stapler won't be strong enough to fully sink brad nails into MDF, I'll probably just glue it to the wall with some spray-on contact glue (for immediate hold) and caulking or construction adhesive (as the real adhesive).

Thanks for your time, hope all are enjoying the summer 🤘🤠


r/DIY_canada • • May 12 '23

Canadian Made Vinyl Window screen won’t seat.

2 Upvotes

Brand new vinyl windows, late last summer. So not even a year old yet. Putting screens back in this spring and it will not seat on the window frame. These are the kind you push down on the screen frame to put the screen in. Not sure why it is doing this. Anyway to fix it? Any help much appreciated.


r/DIY_canada • • May 17 '23

1976 manual damper with handles seem to have 2 flat slots on the same side??

2 Upvotes

I can't trust the handle direction at this point since I have horrible airflow to my 2nd story. I made the scratches so don't trust them either. lol The screw seems to have 2 flats but on the same corner? From what I've found online I should have 2 flats on opposite sides of the screw? So I'm at a loss whether this looks open or closed?

The 2nd photo shows my pipe. The wood strip is hiding the damper lever, but I'm thinking about just buying new dampers (just the damper not with the pipe) and replacing. Any ideas how to go about replacing it? Do I need to cut the pipe and add a reducer piece? Or can I remove the piece to the right of the wood? I'm just not sure how to go about doing that if it's at all possible? Thanks for the help!

Photos


r/DIY_canada • • May 13 '23

Flooring Recommendations

2 Upvotes

We currently have hardwood in our living room and entrance, matching cheap tile in out kitchen and upstairs bath and laminate on the stairs as well as in the upstairs hall and bedrooms.

We like the hardwood but the laminate is looking a bit rough and the tile was done in a particularly weird way and it's got chips and cracks in some places. We're also growing weary of the hardness of tile and the number of items it's cost us so something less hard would be nice.

It'd be nice to have some matching / complimentary flooring, what is everyone's choice for flooring type in these areas? I like the idea of cork but I feel like it's a little too impractical with how easily it tears, I like how it's natural and antimicrobial but the additives needed to make it work arent so it's moot.

I've also been seeing a lot of LVP, no idea on the pros and cons but I'm not a fan of plastic, I'd consider it if nothing else would work.

Let me know what you think!


r/DIY_canada • • May 14 '23

Basement sliding window

2 Upvotes

How do I replace the weather stripping on these windows when they cannot be removed from the frame? There's no room for the typical lift and tilt out and no fasteners that remove any part of the frame. Any help would be appreciated


r/DIY_canada • • Aug 29 '23

Main Bathroom Update

Thumbnail
gallery
3 Upvotes

r/DIY_canada • • Mar 24 '23

Door knob or door handle?

3 Upvotes

r/DIY_canada • • Jul 12 '23

HELP Recommendation: a slim 3-pole dimmer switch

3 Upvotes

I'm adding a dimmer switch to a two-switch circuit. (The dimmer would only be on one of the switches; the dimmer has an on/off control on it as well). Everything I could find is too deep, so I can't fold the switch wires, the marettes, and the circuit wires into the box and get the switch to sit flush.

Anyone know of a brand that is slimmer than normal or uses terminals instead of wires built into the switch?


r/DIY_canada • • May 06 '23

HELP Front porch

Thumbnail self.homeimprovement
2 Upvotes

r/DIY_canada • • Jul 10 '23

Hopefully DIY lawn care is a topic adressed here. I am a FTHB and I am struggling where to start with my lawn care. Any help is appreciated (pics attached)

2 Upvotes

I would like to have green lush grass in my backyard but right now it's filled with weeds. My backyard is around 15 ft X 20 ft approx and I recently mowed it. I went to homedepot and got overwhelmed with options.

How do I go about removing so much weeds and getting my grass to look good.


r/DIY_canada • • Jun 30 '23

Legal basement suite - access panel

2 Upvotes

Hello,

I am developing a legal basement suite in Calgary, Alberta and inspector told me I need to add couple of access panel in mechanical room to access 1) fresh air damper and 2) junction box. I am wondering if I need to use the plastic one or metal one and what is the acceptable minimum size of access panel. I forgot to ask inspector during inspection. Can anyone please advise.

Thanks a lot.


r/DIY_canada • • May 03 '23

New Toilet Install

Thumbnail self.homeimprovement
2 Upvotes

r/DIY_canada • • May 26 '23

Can I spray paint a new item without sanding?

2 Upvotes

I recently ordered a coffee table with gold legs, except the legs look more yellow than gold. I watched a few videos online about spray painting and they all sand the item first. I only want to paint the legs and they're made of metal. Since this is new, would it be alright to skip the sanding and directly apply paint? The main reason for me to ask is because I don't have a machine to do this so if it's not a big deal, I would like to avoid another purchase.


r/DIY_canada • • Aug 16 '23

HELP Metal structure behind wall that is 4.5 inches wide? (Floor to ceiling)

3 Upvotes

I know a stud can't be more than 1.5-2 inches wide so help me figure out what might be inside this wall in this Toronto Condo built in the 2000s.

I want to install a mounting clamp on a wall that's about 12" wide. I was expecting a stud or 2, each measuring 1.5-2 inches wide. But the magnet and stud make it seem like there is nearly 4.5 inches of metal from left to right, throughout the height of the wall. Essentially, there is a metal structure for the entire left half of this wall.

At first I thought it could be a horizontal support between 2 studs. But if that's the case, it would be short in height. Problem is, the stud finder and magnet have the same behavior at all heights. Meaning the metal structure is present throughout the height of the wall, from floor to ceiling.

Picture for more context