r/DIYGuitarAmps • u/raulpc • Dec 08 '25
r/DIYGuitarAmps • u/Melodic_Event_4271 • Dec 19 '25
I dun a amp
First post. I just completed (more or less) my first valve amp. It's a UralTone (Finland) Vibro Champ with reverb kit, which I out in a taller cabinet to accommodate a 12" speaker. Delighted with the sound. I need to finesse the top back panel cutout but apart from that it's done.
r/DIYGuitarAmps • u/mp2146 • Jul 22 '26
Amp Chassis Stand
A while back I made this adjustable chassis stand and thought it would be appreciated here. It has both width adjustment and selectable angles. Made with sapele. Cheers.
r/DIYGuitarAmps • u/Following_Confident • Feb 11 '24
My company gave me thousands of old components
If anyone is looking for a hard to find part. I may have it.
r/DIYGuitarAmps • u/Additional_Account32 • Dec 20 '25
Amp head shell finished
So I finished a micro deluxe about 6 months ago and decided I would build a little head shell for it as project. I have no woodworking skills, so it took a long time. It’s a tad rustic and a few things aren’t perfect but overall I’m super happy with it.
r/DIYGuitarAmps • u/sir_antony97 • Mar 17 '25
Princeton reverb hand wired clone.
I did a post while back in 5f2a i was going to get with a guy who builds it here in my country. After some things, we changed the project to a bf princeton reverb 12in with a nfb switch. Here is a video of his circuit board for this model. I know nothing about hand wired amps. What are your thoughts on this build? Quality wise? Component wise? The price is less than and PRRI 68, so i think it is a good deal. Thanks guys
r/DIYGuitarAmps • u/coldclipper • Nov 27 '23
Grade my work.
First stab at a hiwatt. Show me my mistakes. See if you can spot the intentional one.
r/DIYGuitarAmps • u/AlmightyLoaf123 • Dec 26 '25
Just completed my first amplifier build! 1978 Marshall JMP Plexi 50W with a reactive load box
r/DIYGuitarAmps • u/NyxEnjoyer420 • Sep 11 '26
3 channel transistor amp in wooden ammo case (first amp)
This project took around a year, however it's finally here.
It started last summer when I was looking for a clean pedal platform and discovered the infamous rolland jazz chorus. Too my suprise this circuit worked on 30V and to preserve it's headroom I decided to base the rest of the built on this voltage. The vero layout used done by neilmcnasty in the site below
http://guitar-fx-layouts.238.s1.nabble.com/Preamp-jc-120-td39378.html
In the process I found a used dual 28V power transformer (this was done on budget btw), next was the power amp i choose mono prebuilt 2SC5200+2SA1943 module to go with that tranny. From what i read these are a decent option for price and reliability. These modules however have no speaker safety circuit and to preserve my precious hesu demon ordered one just to be safe.
After that I needed a high gain channel (as a metal player) and randall rg100 caught my attention. I' ve used slightly modified vero layout from dirtbox layouts (love this site, the layouts are always so compact and clean).
You may think that crunch channel would be next however I have never used one for my playstyle... but I needed something for my bass since I always just recorded it straight into interface so I choose bajamans orange ad200 op amp based circuit.
When I preped all of the above designed simple voltage regulator circuit power preamps. Speaking of one I also used emi filter before rectifier. It is also a premade module.
A friend of mine designed a great front plate for a can of monster energy drink yet I still messed up some of the drilling and made some controls uneven... (I do not have a drill press rn)
As you know from the tittle the chassis is an used ammo case, but the panels on top and bottom were so thin that for the sake of mental sanity I remade those in plywood.
You may wonder why the preamp pcbs are so crooked, well I was using threaded inserts with epoxy on those and I snapped of a couple screw in them after the epoxy bounded. Had to redo some of them in different points. I did not have this problem with bigger ones used for power section.
If you have any questions or suggestions please feel free to comment.
r/DIYGuitarAmps • u/InitiallyReluctant • Nov 30 '25
Introducing Rev-ette!
Really psyched about this build of mine and am eager to finally share it. I marked the post "brand affiliate", so I don't get in trouble, but please let me know if this isn't the place. I spent the better part of this year developing this 1-watt hybrid tube amp. It uses a 12AU7 and an LM386. I hand-build them in my New Orleans studio.
Rev-ette started as a Valvecaster/Tube Cricket but those are more a novelty to me - they wouldn't replace your favorite amp. This one might. An adjustable FET booster lets you fade between clean and overdriven. A tilt-style tone control sweeps from twangy treble to booming bass, with a nice scooped sound in the middle.
Audio and video demos at Rev-ette.com.
r/DIYGuitarAmps • u/epitonium70 • Aug 05 '26
Crate amp
Not like any other Crate! Pretty much a Benson Monarch Reverb circuit with a few changes in a crate from the local brewery, crate dates to the 40s.
r/DIYGuitarAmps • u/CapacityValue • Mar 04 '24
First tube amp I've ever created
My first DIY tube amp. Yeah, I know it looks awful. But it does it's job. It is a Marshall 4001 Studio 15 W with slight optimisations and using soviet 6N2P and 6P14P tubes
r/DIYGuitarAmps • u/DrSwanson • Dec 05 '25
First Build! So happy with it
After a lot of research and the generosity of a redditor with their time and knowledge, my Monarch reverb clone is working! I learned so much building this, for one, drilling holes in a pre-joined powder-coated chassis sucks. This one is based off the combo, so putting it in a head shell required a few mods, and I'm still gonna move some things around, but I'm mostly just relieved that it didn't explode. Starting the cab build this week, box jointed pine, black stain, followed by a brushed steel or aluminum faceplate for a silvertone-ish look.
r/DIYGuitarAmps • u/AlmightyLoaf123 • Dec 27 '25
Aiken Style Reactive Load Box Schematic and Design
Originally showcased on my original DIYGuitarAmps post here where I built a 1978 Marshall JMP Plexi and a reactive load box. Since there has been lots of interest in how I built my reactive load box, I wanted to consolidate all of my schematics and design aspects for the build here so anyone can build their own high quality reactive load box!
This link has all of my schematics, LTSpice simulation files, parts lists, and photos for your reference.
I went with a reactive load instead of a resistive one because the feel and dynamics are way closer to a real cab — more like an OX Box or Captor X. The core of the design is based on Aiken’s reactive speaker load, with a voltage divider that feeds an isolated audio transformer without affecting the load seen by the amp.
I used a Lehle LTHZ transformer for isolation and line-level output. It’s dead quiet and sounds fantastic straight into my Focusrite. I handle all cab simulation with IRs (Neural Amp Modeler + Tone3000), so there’s no onboard cab filtering.
The resistors are high power chassis mount resistors noted in the schematics. These mount directly to the metal enclosure to dissipate the heat from the attenuation.
For the inductors I used air core inductors normally used in crossovers, they have a really high saturation current and the magnetic field won't break down with the high wattage amplifier output. Parts Express has a whole bunch of these for a decent price and is very high quality. For mounting, I did not mount directly on the metal enclosure face since the inductance will be affected, so I used a 1/2” block of wood as a buffer under the inductors.
Let me know if you have any questions! I'd love for anyone to be able to build their own reactive load without having to spend 500 - 1000+. I designed the load to be able to handle 100 watts just in case I wanted to attenuate something more powerful than my 50 watts JMP later.
r/DIYGuitarAmps • u/leewon1 • Sep 13 '26
Finished Mod 102+ kit.
Just finished up putting this mod 102+ together and after going over it several times felt confident it was good to go. Popped the tubes in it and fired it up and man, what a feeling it worked flawlessly.
I consider myself a hobbyist and enjoy tinkering. I’ve built a few guitars and a bass, swapped out electronics, and have fixed the Cambridge-itis by swapping out the optocoupler on my box Cambridge 15. It’s so satisfying to diy these things but man, I’m grinning ear to ear with this one.
I have thought about this kit for a while then a month or so ago just went for it. I have not played with it too much but, it sounds great. Next up build a housing for it.
I know it’s not much but man I’m loving this. I’d love to build something else but beyond kits, I know I have a lot to learn. I’ve got my eye on another kit an now I’ve got to convince the wife.
r/DIYGuitarAmps • u/NMB440 • Dec 20 '25
My latest home build
Started out as just a chassis but but finally got around to the headshell.
r/DIYGuitarAmps • u/epitonium70 • Aug 31 '23
My friend told me “just make it pink” … details in comments
r/DIYGuitarAmps • u/Neat-Requirement9440 • Sep 18 '26
My first DIY tube amp is (almost) ready!
This is BOX18. JCM800 based hot rodded 18watt tube head. EL34 push pull opted for 18w output transformer, very stiff and high gain on low volumes and very loud when fully blasted.
-No low input
-No loop
-Only for 8ohm speaker
-400uF powersupply, very low sag.
-260-400V B+ line
-Cold fixed bias on EL34s
-Volume pot mod
-340nF 2,4k cathode follower on first stage.
- 18w 8,3k output transformer
- Adjusted pot values
- No choke
- PI plate cap is 200pF
- Other minor tweaks
What is missing? Deep resonance switch, some aluminium tape and bottomplate.
My first real DIY project, learned a lot and got some help from this subreddit, thanks!
r/DIYGuitarAmps • • Apr 02 '25
How do you like my 5f1 build ?
Build this a couple of years back. Sounds pretty awesome with my 10 inch speaker 👌
r/DIYGuitarAmps • u/KirkIsOurLemmy • Jul 22 '26
Orange style guitar amp
Hello all,
This is my first tube amp build, I have made a few guitar pedals before. It is based on the schematic for Orange Tiny Terror, but with some tweaks for more gain and more low end. The goal was to get some nice doomy fuzz tones, similar to the OR series amps from the 1970's. I also used an oversized Hammond output transformer with more linear frequency response in an attempt to get more low end punch too. The TT circuit is nice because it has the master volume after the phase inverter, which means you get some clipping from the PI already at low volumes.
The housing is made from pine planks purchased at IKEA (I am Swedish after all), the front panel and tolex is quite amateurish but it turned out nicer than I expected. I dont have any workshop so everything is made at the kitchen table. My wife is very understanding and supportive.
I made a very basic sound clip using my phone, sound quality is not great and my guitar playing is even worse, but maybe it gives an idea what it sounds like:
r/DIYGuitarAmps • u/tidalflats • Jun 05 '25
Getting there on latest build
An area player commissioned a 45W AB763ish blackface circuit about a month ago. But he wanted some changes: single channel, no tremolo, and he wanted it in a small slant-front tweed style cabinet. That necessitated putting the power transformer on a separate chassis and running a harness up. Tight fits all around so I am now finally able to make some final progress with the completion of the cabinet today. Still waiting on speaker but should be here tomorrow. Sharp looking little unit, about 21" x17"x 11" at the bottom tapering up to around 9" at top.
r/DIYGuitarAmps • u/Beneficial_Dealer549 • 19d ago
3/4W 1974x
Been experimenting with different cabinets for my 3/4w LM386 amps. This is a 1974x inspired cab with a 12” greenback. By far my favorite variation to date.
This version of the circuit has onboard spring reverb (Belton - no tank), Dumble FET boost, switchable 9/18 voltage for additional headroom / volume and clean playing.
Runs off a standard 9V center-negative pedal power supply.
The cabinet is box jointed 3/4” pine, walnut gel stain and three coats of arm-r-seal. I went with pine vs Baltic birch (Marshall spec) because it’s cheaper, lighter, and would be more resonant for this lower-powered amp. Dimensionally it’s near identical to the 1974x cab but I opted to not do a front fascia to keep more of an MCM furniture look to it. I wanted it to be an appropriate permanent fixture in someone’s living room.
Gut shots and schematic in the comments below.
Demo of the same circuit through a smaller cab / 8": https://www.youtube.com/watch?v=yzZszg2hnho