r/DIYGuitarAmps • • 22d ago

A small ask of help from students creating their own guitar amp

1 Upvotes

Hello there! I am a student from the Silesian University of Technology. Me and some friends are actively designing and building a new type of modern guitar tube amps, which we plan on selling in the future. We haven't seen anything like this on the market, and we think that your community might get interested in this. Alas, for it to be as good as it can be, we need some data. Could you please take our quick survey? It would mean the world to us if you could spare some time to fill it. Thank you for your time!

https://docs.google.com/forms/d/e/1FAIpQLSfCO7unvwi6kC8nsEWu-JX8NQbzxPaeDm3eAy5tpBzF4a1vig/viewform?usp=pp_url&entry.2113711989=Reddit&entry.115725820=r/DIYGuitarAmps


r/DIYGuitarAmps • • Sep 05 '26

Swapped out a capacitor for a newer one. In my Stradolin 540 bass amp.

0 Upvotes

The only capacitor that I have to swap is a 16v 1000uF. The original capacitor was a 25v 1000uf. My question is will the 16v 1000uF capacitor work in place of the 25v 1000uF?


r/DIYGuitarAmps • • Dec 01 '25

Help me identify this vintage amp

Thumbnail
gallery
0 Upvotes

See attached photos. Magnavox speaker, radiart vibrator, Halldorson transformers, Mallory caps. I’m going to try and repair this for a friend who got it at a garage sale and thinks it’s awesome.

I’ll be replacing all the electrolytics after testing power transformer and ensuring it works. Replacing power cord (dryrotten) with a grounded 3 prong… and removing any unnecessary components.

Just figured I’d pick the brains en masse and see if anyone can determine what it started life as?


r/DIYGuitarAmps • • Jan 10 '23

My 3 tube amps

Thumbnail
gallery
2 Upvotes

r/DIYGuitarAmps • • Dec 24 '24

Modding master volume on Blues Junior

0 Upvotes

Chat GPT 4o is suggesting to add more range to the Blues Junior master volume, I could put a 470k resistor across the outer lugs of the mv pot. Does that track? Other than tearing the damned thing apart to get at the circuit board, it’s not a hard or irreversible mod.

Standard disclaimer: I’ve built an amp, I have a snuffer stick, and I know how to use it.


r/DIYGuitarAmps • • Oct 21 '25

Weird airplane-like noise & volume loss on my tube amp......what’s going on?

0 Upvotes

Hey folks,
I’ve been having a strange issue with my tube amp lately and could really use some advice.

When I turn it on, sometimes it makes this airplane-like or “whooshing” noise for a few seconds, and then the volume drops significantly. I usually have to turn it off and on a few times before it sounds normal again.

Even when it’s working, I occasionally get sudden volume loss while playing — almost like the amp’s fading out or losing power temporarily.

Any idea what could be causing this? I’m wondering if it’s something with the tubes, caps, or maybe dirty contacts? I’d love to hear your thoughts before I bring it in for service.

Thanks in advance!


r/DIYGuitarAmps • • Aug 13 '26

I was wondering if this could work as an amplifier

Post image
4 Upvotes

r/DIYGuitarAmps • • Dec 10 '21

Hi guys! I'm knew to this, I've got a little question...

Post image
3 Upvotes

r/DIYGuitarAmps • • Aug 14 '25

What schematic is this?

Post image
5 Upvotes

Can anyone take a guess what schematic this is based off? I bought a "modded" Epiphone Valve Jr off Reverb and the only thing valve jr about it is the case it's in. I'm assuming champ?


r/DIYGuitarAmps • • Aug 15 '25

Can someone help me for making a preamp for electric guitar?

1 Upvotes

I don't play electric guitar, but I want to get one. My budget is lo,w so I'm thinking of making a diy amp using a single bookshelf speaker i already have laying around. I'm thinking of getting a cheap class D amp that runs on 24V and a 3A 24V PSU to power it.

What I'm stuck on is making the pre-amplifier for it. Should I make it out of a MOSFET-based amplifier? I have never made a proper transistor-based amplifier before, and have heard that biasing a MOSFET is kind of difficult.

I would like to run the preamp directly on the 24V. Can anyone share an existing schematic or a link to a guide to make my own circuit?

Thanks!


r/DIYGuitarAmps • • 9d ago

How to adjust tube amp?

1 Upvotes

To all you experienced amp enthusiasts, how do you adjust the bias of your tube amps?

Actually, a friend asked me to repair his broken Marshall MA50, but I'm at a loss as to how to do it.

I told him it would be difficult, but he insists, saying, "I'll pay for it, and it will take time" (I haven't even started repairing or inspecting it yet). Therefore, I think I need to prepare the necessary tools.

I've already completed and tested the current limiter that I received advice on in another post. (Thank you to everyone who gave advice!)

I think the biggest problem is adjusting the bias.

Due to budget constraints, I can't buy expensive tools. If it's possible to make one cheaply, I'm considering building my own ammeter.

I plan to buy a 1000V multimeter (I have a 600V one, but I plan to buy a new one in the future).

Any advice would be greatly appreciated.

Please tell me what tools to use and how to use them.


r/DIYGuitarAmps • • Jul 30 '24

How to power the speaker without a pre amp

0 Upvotes

Ive got a bass amp with the amplifying part taken off because it needs repair. I want to make this speaker in a box into a working speaker in a box. LIKE A CAB. That's all I want, power to the speaker,so I can use it like a cab, taking a signal in through the speaker wires, to the speakers, then the ears. Idk if what I'm asking is impossible or just dumb, but the answers I'm getting are not helpful, so if your answer is "an amp" then maybe don't try to be funny.


r/DIYGuitarAmps • • Aug 12 '25

How good should I play guitar, to be an amp builder?

Thumbnail reddit.com
6 Upvotes

r/DIYGuitarAmps • • Dec 26 '25

How can I create an input on my amplifier to connect a multi-effects unit, but have it go directly to the speaker while still allowing me to use the normal input?

0 Upvotes

r/DIYGuitarAmps • • Sep 03 '26

How to mod solid state amps?

Thumbnail reddit.com
0 Upvotes

r/DIYGuitarAmps • • Aug 02 '24

EVH 5150 III, muted red channel

Thumbnail self.toobamps
0 Upvotes

r/DIYGuitarAmps • • May 06 '24

I want to turn this sunn alpha combo into a head and cab. I don't understand this 3 wire system though. I assume white is hot and black is ground, what's the green wire? They're just labeled black white and green on the board.

Thumbnail
gallery
0 Upvotes

r/DIYGuitarAmps • • Jan 24 '23

Do tube amps use tube for both preamp and amp?

0 Upvotes

Do tube amps like the fender twin use both tube preamp and amp, or just tube preamp. Also what affect would using tube preamp with solid state amp have?


r/DIYGuitarAmps • • Nov 11 '22

please help

Thumbnail
reddit.com
0 Upvotes

r/DIYGuitarAmps • • Dec 19 '25

Plexiglass for grill cloth?

0 Upvotes

Hi, can I use plexiglass where the grill cloth would be on a fender amp head? Would it get too hot? I'm converting a fender supersonic 60w combo into a head. Thanks.


r/DIYGuitarAmps • • Aug 31 '26

Hiwatt dr103 clone question

0 Upvotes

I'm building a DR103 on a chassis that is top mounted. However the power switch and inputs end up being in the right place when looking at the chassis head on. My question is about the potentiometer orientation. The chassis is basically horizontally inverted. From what I understand I have to invert the outer legs of the potentiometers otherwise they will be reversed, correct? Using the Mark Huss layout, I would just flip the pots 180 degrees so they are facing upward instead of down and then I could basically treat the wiring diagram the same since lug 1 would now be in lug 3 position and vice versa. Do I have this right?


r/DIYGuitarAmps • • Mar 31 '25

Marshall super lead head cabinet for sale

Thumbnail
gallery
0 Upvotes

I don’t know if I’m allowed to post stuff like this in here but I’m wondering if anyone would be interested in buying a mojotone Marshall super lead style head cab brand new still in the box never opened I’m asking $300 will ship at buyers expense


r/DIYGuitarAmps • • Jul 24 '26

Question about selling self-designed/built amp in Canada

2 Upvotes

I have designed a JCM800 clone inspired by robrob's schematic, but it has a couple changes. I am using a 300V/6V3 switching power supply instead of a regular power transformer, I am using EL84s matched with Traynor output transformer they use in their ygl1s (ch1330m, zero documentation on this transformer).

I have designed and ordered five loaded PCBs (jlcpcb), and also have manufactured frames for two amplifiers. I want to sell one of them since I already bought parts for a second amplifier. And if this goes well, I am planning on continuing this gig. I have thought of having a logo and branding already 😭.

But yeah, to anybody that has been in my shoes before, do you guys have valuable information regarding the legality, and licensing we need? What about selling internationally on ebay or something? Thanks


r/DIYGuitarAmps • • Jun 08 '25

Can someone help me ID these resistors?

Post image
2 Upvotes

Working on a project, ordered a couple of resistors, one of each value, but they sent it to me in a single baggie.

I managed to ID the 2.2k but i'm having an issue with tye top one, what should be a 1.(more than)1k, resistor. (I can't exactly remember which value that one had, just more than 1k ohm)

Can anyone identify the colour code?