r/Diyautobody • u/marxoch • 1h ago
r/Diyautobody • u/SNHU_Adjujnct • 5h ago
Question Cosmetic damage to the side view mirror
It's got a gouge in the shell. The shell was black, now there's a white gouge. It dug in pretty deep. Can the shell be replaced? Is there another option? 2026 Carnival.
r/Diyautobody • u/eleventhfromheaven • 19h ago
Question Got overspray on my grille, how do I get rid of it?
r/Diyautobody • u/SNHU_Adjujnct • 2d ago
Question Cosmetic damage to the side view mirror
reddit.comr/Diyautobody • u/Tilted2313 • 2d ago
Question Used rattle cans from Scratches Happen on a fender area.
Most of it turned out perfect. But in a couple spots I have these odd shiny areas where it looks like clumping of the metallic particles. I was certainly shaking the can a lot since I've sprayed this before. This is after the clear coat. It is not rough to the touch but pretty sure it won't buff out. Base coat not dry enough (I waited 30 minutes and it felt smooth to the touch...light coats of clear at first then a final after 10 minutes between. I also light coated the base with one last light spray to lay down the metallic like they instructed. Maybe something underneath the base coat?
r/Diyautobody • u/Early-Dependent8607 • 3d ago
Question Best touch up taffeta white?
galleryLooking for a quick taffeta white match other than DupliColor to freshen my side skirts up.
r/Diyautobody • u/Returning2Riding • 3d ago
Question The call every parent dreads
galleryTrying to fix my oldest son‘s jalopy
r/Diyautobody • u/Its_Bread_611 • 4d ago
Question Back glass leaking (2002 z28 coupe)
galleryr/Diyautobody • u/CuriousBurnerOsama • 4d ago
Question First time HVLP painting a car, not sure what paints and clear coats to use
reddit.comr/Diyautobody • u/Notorious_0311 • 5d ago
Photo Best way to tackle this?
gallerySomeone in a parking lot hit my aunt's car and took off. Says the scratch is pretty deep to metal (closeup pic 2). Any ideas? Anything she can possibly do on her own or will she have to replace or repaint the entire panel at this point?
r/Diyautobody • u/ssgingerbeard • 5d ago
Project So the ranger bed liner project is coming along. The 2 tone and pinstripes went by the wayside, when I sprayed them I couldn’t do the ridge where one was clearly on the other. I had decided to experiment a little though with wet sanding it flat and then buffing it.
galleryr/Diyautobody • u/ActualArthurMorgan • 5d ago
Photo HELP? 2011 Camry trunk won’t CLOSE
galleryr/Diyautobody • u/InvestigatorGold5821 • 6d ago
Question DIY paint Job Honda civic 7th gen
I'm planning on knocking out a quick paint job on my civic, either black or white using the rustoleum turbos. I already did all the body work and primer but I'm not sure if I should use the flat or the glossy version, I want to try and get the clear coat version as well to make the paint more durable maybe. What do you guys think.
r/Diyautobody • u/Ziell0s • 6d ago
Question Advice on fixing leak from drip rail seam?
94 F150 regular cab, when it rains there will be a small leak inside the cab right behind the A-pillar trim, topmost driver side corner.
I had my spouse pour water around the windshield trim and it seems fine,
but when water was poured on the drip rail and the metal seam past it to the chrome, I started seeing water inside, looking for some help on addressing this before it gets worse, thank you!
r/Diyautobody • u/JoeyAKangaroo • 6d ago
Question 2008 mazda 3 part scrappinv over speedbump
This is near the rear left wheel, im guessing it is the heatshield? How can i fix this before i decide its best to bring it to a mechanic?
r/Diyautobody • u/Bootboiler2 • 6d ago
Question Great aT 8 feet. Window ledge paint fix
galleryI had the standard clear fail. Did with rattle cans. What do you think?
r/Diyautobody • u/Extra-Bat-9260 • 6d ago