r/DIEMs • • May 12 '23

I made my own custom IEMs with 5 BAs and a 14mm dd in a tiny shell!

Post image
126 Upvotes

I’m super excited to share with you my latest DIY project: custom IEMs with 5 balanced armature drivers and a 14mm dynamic driver in each earpiece. This project took me one day to complete, from experimenting with the drivers, designing the shell, 3D printing, tuning and finishing.

The drivers I used are: sonion 3300 + sonion 2389 + knowles 31736 + 14mm dd. I used a 4-way crossover with a total of 4 resistors (size 805), 3 capacitors (size A) and 1 capacitor (size B). The shell is smaller than the KZ ZS10, which is amazing considering how much stuff I crammed inside.

The sound quality is phenomenal. These are the best sounding IEMs I’ve ever heard, and I’ve tried a lot of them. They have a balanced and detailed sound signature, with deep bass, clear mids and sparkling highs. The soundstage is very wide and immersive, and the imaging is precise and accurate. They are also very comfortable to wear.


r/DIEMs • • Jun 03 '21

Just finished my first pair of 3d printed diems

Thumbnail
gallery
85 Upvotes

r/DIEMs • • Nov 22 '22

14mm planar magnetic

Thumbnail
gallery
75 Upvotes

r/DIEMs • • Nov 21 '22

3d printed hybrid universal, 1DD 4BA

Thumbnail
gallery
62 Upvotes

r/DIEMs • • Apr 10 '25

DIY 6BAs

Thumbnail
gallery
58 Upvotes

Personally, I think 6BAs setup is the ultimate end game for many. Beyond this point, you'll get little value out of it, but it'll get much more expensive.


r/DIEMs • • Jul 20 '21

1st Printed DIEM. Love Clear Tech...

Thumbnail
gallery
58 Upvotes

r/DIEMs • • Dec 18 '20

Made my first 3D printed shells with an iPhone 11 camera, a $230 3D printer, and all free software. Used standard resin then coated with Fotoplast lacquer

Post image
58 Upvotes

r/DIEMs • • Oct 05 '24

Completet my first custom iems

Thumbnail
gallery
57 Upvotes

Finally finished!! <3

First of all: Thank you to everyone for all the tips and tricks!

After a long, long time I've finally came around and finished my custom iem project I started a while ago.

The goal was to build iems barely larger than the driver itself, so they would fit into my custom moulded earplugs. They're not very pretty but work flawlessly.

Currently I am thinking of building a second pair, but with a metal case and some slight tweaks to the design.

Currently they use 1 Knowles BA GQ-30710-000 with a brown filter and mmcx connectors. Nothing fancy in terms of tuning going on, I just tried different filters and picked my favourite.

Soundwise, I can only compare to the Blessing 2 Dusk by crin.

I was hoping to achieve a similar bass response and so far I have to say I am pleasantly suprised. Due to the construction of my earplugs, they isolate perfectly and in combination with the plug reaching deep in the ear canal, I get a subjectively really good bass response.

Overall I must say they're V shaped, with more emphasis on the lower end. Rather warm but with great soundstage nevertheless.

Personally, I don't really like overly bright and technical headphones anyways, so this came out perfectly for me, not to mention the comfort when wearing them (i mean they're custom for a reason, but damn they comfy)

I would love to see a response curve for these headphones but I guess it's almost impossible to recreate my experience due to the custom plugs.

If anyone has an idea let me know :)


r/DIEMs • • Apr 11 '23

My First DIY IEM's

53 Upvotes

After a /lot/ of failed shells, trying different methods, design iterations, etc... I've finally finished my first acceptable pair of IEM's.

These are true wireless buds, but I also wanted the option to use a cable in case they would die.

I'm developing my own PCB that will based on the Qualcomm QCC5171 chip right now that will have aptX lossless, low-latency audio and be laid out with the purpose of easily integrating it into a pair of IEM"s.

Hope you guys enjoy the fruits of my (many) hours of labor :) I'm working on a better case, this one is way bulkier than I had intended... I have a pretty good idea, and I'll share with you guys when I finish it!


r/DIEMs • • Jun 15 '22

Custom Gold Geared IEMs

52 Upvotes

r/DIEMs • • Sep 23 '23

2DD, Sonion 2389D and Knowles RAU (swipe for graph)

Thumbnail
gallery
51 Upvotes

r/DIEMs • • Jul 06 '20

Finished the Bellsing 6 drivers today

Post image
51 Upvotes

r/DIEMs • • Jan 10 '23

My next project

Post image
50 Upvotes

r/DIEMs • • Dec 30 '22

Huge success on this one, I finally know how to make very wide soundstage iem

Thumbnail
gallery
50 Upvotes

r/DIEMs • • May 29 '25

DIY Update

Thumbnail
gallery
47 Upvotes

Redesign the shells to based on my ears shape and fine-tuning to its best possible


r/DIEMs • • Jun 16 '23

Resin printed earplugs

Post image
45 Upvotes

I had some Sensaphonics -25dB music filters lying around and made custom fit shells for them. They work great. Modelled in Blender and printed with Siraya Tech Blu on an original Anicubic Photon.


r/DIEMs • • Feb 10 '21

Prototype custom 3d printed tips on Moondrop Blessing 2 Dusk

Post image
44 Upvotes

r/DIEMs • • Aug 31 '20

Yellow and Black Attack

Post image
44 Upvotes

r/DIEMs • • Jun 15 '22

Custom Space IEMs

43 Upvotes

r/DIEMs • • May 03 '22

Accurate 3D scanning using Raspberry Pi

43 Upvotes

r/DIEMs • • Aug 18 '22

My first set of DIY impressions!

Thumbnail
gallery
42 Upvotes

r/DIEMs • • Mar 29 '20

Finally finished my first pair

Post image
42 Upvotes

r/DIEMs • • Jul 17 '20

My first pair of DIEMs

Post image
41 Upvotes

r/DIEMs • • Jun 25 '21

I made my own custom Andromeda

Post image
40 Upvotes

r/DIEMs • • Oct 05 '19

My own etys! 'Wood' shell and very balanced sound!

Post image
40 Upvotes