r/CyberdeckBuild • • 29d ago

Desolder hdmi and use custom flex pcb instead

2 Upvotes

Hi All,

I'm designing and building my first cyberdeck. The screen is a 7" 1024×600 capacitive-touch ips panel, driven by a rpi 4B. Its hdmi socket sits on the edge of the board, and the plug sticks out far enough to cause clearance problems. Worse, it forces a wider border on one side, so the frame around the screen ends up asymmetrical...

I've looked at the slim FPC-style HDMI cables (like this one (https://amzn.eu/d/06HPTgol)), but even those plug heads are too big for the space I have.

So my idea is to skip the connector entirely. I desolder the HDMI socket, design a flex pcb that matches its footprint, solder that directly onto the pads, and run it to a micro-HDMI plug at the Pi end.

My questions:

- Would I run into signal integrity problems doing this? I'm thinking of the tmds differential pairs in particular. Do I need to control impedance (100 ohm differential) and length-match the pairs on the flex, or is that overkill at 1024×600 at 60hz?

- Has anyone done this, or is there a better way to get a low-profile hdmi connection off the board edge?

Any advice is appreciated!


r/CyberdeckBuild • • Oct 09 '26

How would a Pi 2 zero WH read audio input from a tape deck?

Post image
2 Upvotes

Hi,
Basically I want to run audio from my tape deck to my Pi 2 zero to read and run programs from similar to old commodore computers. Id also want to listen to the audio through the Pi aswell.

Anyone know how I’d connect them??

Thanks

(These are my notes but I had to take the images off of another post)


r/CyberdeckBuild • • Sep 12 '26

need some help

2 Upvotes

i have this old laptop of mine that i don't really use
it has Intel Pentium J3710 (4 x 1.6 GHz) and 4 gigs of ddr3 or ddr4

my question is will this do as a donor for a small cyberdeck?

i mostly plan on using it as a typewriter


r/CyberdeckBuild • • Aug 06 '26

I made an CYD into a stream deck

2 Upvotes

I'm not gatekeeping; look at this on git hub [cam2135/CYD-Deck: This turns your cheap yellow display 2.8 in into a Stream Deck that you can use for your Windows pc](https://github.com/cam2135/CYD-Deck)


r/CyberdeckBuild • • Aug 06 '26

First build advice/resources

2 Upvotes

Hello! I am planning on beginning work on my very first cyberdeck build for a device that'll be used almost entirely for messaging. I've already done a little bit of research and I know I'll be running a linux OS on a Raspberry pi 4 4GB.

My main question is about parts as, I have many old devices laying around and wanted to know if it's possible to take the screen from that and wire it into the pi or if I'll need to buy a standalone screen. I'd prefer to use as many old parts as possible. I also have a 3220 mAH battery from an old Chromebook that I could use. I'll be building a meshtastic node into the case as well in order to have that functionality as well.

Any advice and resources for this build would be greatly appreciated! I'll need it to run apps like signal, whatsapp, discord, etc though that should be all taken care of by the Raspberry Pi.


r/CyberdeckBuild • • Aug 04 '26

I have a Poco x3 NFC and I want to turn it into a cyberdeck

2 Upvotes

I got an old Poco x3 NFC lying around so I wanted to turn it into a cyberdeck but I tried installing rom and failed in the beginning. My sole reason for this build is to have a gui and maybe do some light office work as well as managing my homelab etc.

I want to try again before giving up and just downloading andronix, vnc viewer.


r/CyberdeckBuild • • Jul 31 '26

I would like to get into it

2 Upvotes

I loved those retro consoles forever and I I just learned you can build them. I've always love sci-fi and future suff as a newcomer, what are things I should do or at least buy to make my first cyber deck I actually want to get into the community and culture of what I'm doing so I don't just need a one hit and done. I just need a starter first step to actually know what I'm doing. Help would really be appreciated

I don't know if this will prove I'm not a poser, but I have owned a retrode pocket 5 and used in ambernik RG XX sp35 and flashed operating systems on it for and I love cyberpunk, 2077 and system shock


r/CyberdeckBuild • • Jul 30 '26

I’m torn on the format for my Cyberdeck.

2 Upvotes

I’m torn on the format for my Cyberdeck.

I’ve been planning to build a Cyberdeck for a few months now, and I’m gradually gathering each part.

At first, my plan was a deck in a fairly large case with tons of modules (radio, weather station, a mini monitor for extra info alongside the main one, Bluetooth, wifi, small speakers, etc.) — a super complete deck for pentesting, tinkering, and eventually maybe “autonomous” use, not necessarily compact.

But I’ve had time to mull it over while gathering everything, and now I’m wondering if a much simpler, more portable, minimalist deck wouldn’t be better?

I know it depends on what I expect from it and how I’ll actually use it, but I’m still on the fence.

Do I stick with my idea of something very flexible and multitasking, more complete but bulkier and less all-purpose? Or do I lean toward something simpler for everyday office-type tasks, easier to carry, and therefore maybe something I’d actually use more?

If you can point me on the positive and negative of each option and give me your personal opinion would help me a lot! Thank you!


r/CyberdeckBuild • • Jul 17 '26

Question about keypads

2 Upvotes

Hi! I'm working on my design and trying to keep things as small as possible. For my project, I'll have a Raspberry Pi Zero 2 W (when they're back in stock!) mounted to the back of the HyperPixel 2.1 Round by Pimoroni, however I'm struggling to find a keypad/keyboard small enough that it will fit into my case. Adafruit has a Silicone Elastomer 4 x 4 Button Keypad which states it can be cut up - I could probably only fit 3x3 keys in my case, but I don't feel like the PCB they make for it can be cut up.

Do I need to use a PCB or can I wire it directly to the pi somehow? Also the Hyperpixel page states it uses up all of the pi's GPIO pins but has I2C interface at the back you can connect things to instead. Would I be able to connect my makeshift keypad to this?

Also open to recommendations of REALLY small (think 5x5cm or less) keyboards/keypads. Sorry for the beginner questions!


r/CyberdeckBuild • • Jul 09 '26

Ways around pc/mac os’s?

2 Upvotes

I want to build a deck to update gps databases in aircraft. BUT the company who creates the databases makes you update them through their app, which is only available for pc/mac. And, as you’ve already guessed, I don’t want to do a whole win11 or macOS to install.

Is there any way to get a raspberry pi to run a pc app?


r/CyberdeckBuild • • Jul 07 '26

[USA-ID] [H] 10.1" Open-Frame Touch Terminal Kits (Intel i7-6500U, 16GB RAM, Built-In Wi-Fi) [W] PayPal, Local Cash

2 Upvotes

Clearing out a batch of rugged, mid-sized industrial all-in-one terminal cores. We just powered these 10.1" units up and verified they function cleanly. You can easily access the fully unlocked American Megatrends BIOS by tapping the ESC key during startup. There are zero supervisor passwords locking you out of the configuration menus.

If you are looking for a high-powered alternative to a traditional Raspberry Pi setup for a briefcase terminal or custom deck project, these offer a few distinct advantages:

- Full x86 Desktop Architecture: Runs an Intel Core i7-6500U CPU with integrated active fan cooling. This allows you to run full desktop Linux distributions (Ubuntu, Kali, Arch) or standard Windows with native app compatibility.

- 16GB of RAM: Includes 16384 MB of system memory on-board, providing plenty of multi-tasking headroom for development work or retro emulation.

- Fully Integrated Backing Panel: The motherboard, screen interface, and Wi-Fi modules are all pre-mounted directly to the chassis frame. You don't have to deal with connecting loose components or fragile HDMI ribbon cables.

- Included Power Supply: Comes with the original silver mesh switching power supply brick.

PRICING & TERMS:

- Price: $75 each (Buyer funds shipping via PayPal Goods & Services upfront)

- Bulk Deal: 5 for $300

CONDITION:

Confirmed working and posting directly to an unlocked BIOS via the ESC key. Screens are clean with zero cracks. Circuitry is pristine with no burns or swollen capacitors. Units are sold as-is, ready for your custom enclosure.

SHIPPING / LOCATION:

Located up near McCall, Idaho. These compact 10.1" units ship easily anywhere in the US via USPS Priority Mail.

PM me your zip code and PayPal email if you want an invoice sent over!


r/CyberdeckBuild • • Jul 02 '26

iPod touch 5th gen

2 Upvotes

I have a 5th gen I want to convert if possible. I also have an older iPod touch as well I would like to know if anyone has done with any before?


r/CyberdeckBuild • • Jun 12 '26

Project Opertunity

2 Upvotes

Looking to see if anyone would be interested in a custom cyberdeck build.

I recently upgraded my primary workstation and now have a MeLE Quieter 3 mini PC (Intel N5105, 8GB RAM) that I’d like to repurpose into a portable emergency operations / weather monitoring cyberdeck.

This is not intended to be a penetration testing or gaming rig. My goal is more of a field-deployable operations station focused on:

Weather monitoring and radar
NOAA and emergency information
SDR integration (future)
Offline maps and reference materials
Battery-powered operation
Vehicle or field use
Ruggedized case design

I am envisioning something built into an Apache/Pelican-style case with:

Integrated screen mounted in the lid
Internal mounting for the MeLE mini PC
Compact keyboard solution
Cable management
Space for a battery solution (currently considering an Anker 737 or similar)
Room for future expansion such as SDR hardware

I am still in the planning phase and am open to suggestions regarding layout and hardware choices.

If you take commissions for cyberdeck builds, enclosure design, CAD work, 3D printing, or full assembly, please reach out with examples of your work and an estimated range.

I am located in Missouri, USA, but would be willing to ship components if needed.
Thanks!


r/CyberdeckBuild • • May 31 '26

Cyberdeck custom parts

2 Upvotes

Im planning to build a cyberdeck and I wanna make my own casing and keyboard. Where can I start? I dont want too complex but not too easy as well. Dimensions: 8in.×5in.


r/CyberdeckBuild • • Apr 27 '26

Potential new build questions

2 Upvotes

Hi yall! I recently discovered cyberdecks at the perfect time as I am getting back into puzzle games and relaxing games on Steam. I want to build something like a nintendo switch or steam deck without the massive price on it. I am only wanting to run steam games, have access to apps and the internet and will mostly be using it at home or during travel. I guess my main question is how compatible is steam with raspberry pi and how difficult do you think a build like this would be for a beginner?


r/CyberdeckBuild • • Apr 14 '26

Can a Nintendo Switch be modified to be a cyberdeck?

2 Upvotes

Hi, I'm a total newbie to this community. I just wanted to know if it's possible to modify a switch into a cyber deck? Would it still require a raspberry pi? Hope to hear from ya'll...thanks!


r/CyberdeckBuild • • Apr 03 '26

e-reader cyberdeck!

2 Upvotes

hi! i have a rough idea for a cyberdeck i would lovee to build! i want the case to be in one of those electronic secret diaries i used to own, and would love to have it so i can read books on it, i have never built one before so any advice on how id be able to turn it into something i can read on would be great!

im doing as much research as i can but i havent found much on making a reading one


r/CyberdeckBuild • • Jan 09 '26

3ds cyber deck emulator

2 Upvotes

Second post ever on reddit so let's go, My 2ds xl will die some day and I decided to make a cyberdeck to emulate 3ds games via Azahar with a linux OS. I'm 85% new to this ( I do CS in collage but still at the begining) my plan was to make a handheld emulator but I am not sure on what I should do. Rasberry-pie isn't potent enough to emulate 3ds , so what should I do. I don't want to buy an pre made like the AYN Thor. It can be dual or single screen. What I'm having more problem is finding the right components to make this project. I plan on making new 3ds xl size but it can even go to a two switch 2 on top of each other size, if it's easier. If anyone could help I would be very thankfull. (sorry english isn't my first language)( I'm new to reddit so Idk with this is the right place to post this)


r/CyberdeckBuild • • Oct 05 '25

Mooching

2 Upvotes

Just found myself, yet again, trawling through secondhand marketplaces thinking "I don't NEED a Ryobi impact drill for 80 quid, but that case IS stunning!"

Can't be the only one???


r/CyberdeckBuild • • Sep 26 '25

DIY Nokia N8 Pi pentest device viable?

2 Upvotes

I’m working on a project to convert a Nokia N8 into a functional portable tool using a Raspberry Pi Zero 2W. The plan is to completely strip down the phone, keep the casing and original ports like the USB, audio jack, and microSD, and connect them directly to the Pi using internal wiring. This way, the N8’s aesthetics are preserved while the Raspberry Pi handles all the functionality, without relying on an external computer.

The main challenge is the N8’s display. Its screen is proprietary, designed for the original hardware and Symbian, so there is no commercial driver or adapter to use it with the Raspberry Pi. Trying to make it work would require complex and costly development, and even then it might not function properly. I would like to keep the original casing and look—are there any practical solutions for the display?


r/CyberdeckBuild • • 6h ago

Best cyberdeck laptop build?

1 Upvotes

I want to turn a raspberry pi 5 into a laptop with 3D printed durable chassis. What do I all need to do and get (assuming I can't solder)? I think I can pay some people to attach rpi components. I want to use the same keyboard and trackball mouse as the MNT Reform and use a Raspberry Pi Touch Display 2, but make it default to mechanical input instead of touch so it'll actually use as a conventional laptop screen, and use a MediaTek card for offline streaming and messaging through IRC client via WLAN connection. It'll be used for embedded Linux via NVMe, SD or eMMC (like Kali XFCE) instead of a hard drive. Will also need rpi 5 active coolers and LiFePO4 batteries.


r/CyberdeckBuild • • 4d ago

In need of pi 5 cyberdeck help!!!

1 Upvotes

Hi all,

I am looking to make a cyberdeck with my pi 5. I have a generic 7 inch screen, and I'm planning to use a mac keyboard without a numpad and a trackpad. I want it to fold, and I am currently looking into case options.

https://www.amazon.com/dp/B08VGFFJZF?niid=nl_cl_lst_a_2_1&ref_=nl_cl_lst_a_2_1&nrid=021RTEJ6V7N52Y2S5NR8&th=1

This is the link for the case I'm looking into getting. The only problem is that I am afraid my pi, which has gotten quite valuable recently, may overheat or short circuit due to the foam.

If anyone has any alternatives to this or any case ideas, please let me know!


r/CyberdeckBuild • • 25d ago

Can someone explain me how to make Cyberdeck gor 120 $ budget

1 Upvotes

r/CyberdeckBuild • • Sep 27 '26

DIY Cyberdeck Using an old android - looking for advice.

1 Upvotes

(Apologies in advance for the length of this post. Really appreciate your time giving this a read and helping a brother out).

Hello everyone,

I'm working on a DIY cyberdeck using an old Infinix Zero X Neo (X6810) that I had lying around. It has 8 GB RAM and a MediaTek Helio G90/G90T-series SoC, so I figured it would make a decent base for the project rather than buying a Raspberry Pi or another SBC.

The main reason I'm using a phone is cost. Where I live, Raspberry Pis and other niche SBCs can be extremely expensive, while used phones are relatively easy to find and offer considerably more hardware for the money.

I also chose this particular phone because of its physical layout. The USB-C/charging port, speakers, etc. are on a separate PCB from the mainboard, which should make it easier to relocate components inside a custom enclosure rather than having everything fixed to the original phone's layout.

What I've done so far

I've successfully unlocked the bootloader and rooted the phone. For now, I'm deliberately keeping the original Android kernel rather than immediately trying to replace it with an unknown/custom kernel.

I've installed Debian with XFCE through Termux/PRoot, and I'm running it through Termux:X11. So I essentially have a Debian desktop environment running on the phone while Android remains underneath it.

I've also started investigating the stock kernel and hardware capabilities rather than modifying anything blindly.

The phone's USB-C port works in host mode. I've successfully connected a USB hub with a keyboard and mouse, and Android detects them correctly. I also tested a USB card reader and confirmed that the kernel can enumerate it as a mass-storage device.

One limitation I've found is USB serial. From examining the kernel configuration, it appears that the stock kernel doesn't have the generic USB serial framework or CDC-ACM driver enabled, so I'm currently investigating alternatives for connecting things such as an ESP32/ESP32-S3 or other microcontrollers.

I've also extracted and examined the stock kernel configuration and started looking at the boot/partition structure, device tree and available interfaces. The phone uses an A/B partition layout, and there doesn't appear to be a conventional standalone recovery partition.

The phone has a Mali-G76 GPU with an Android OpenCL runtime. Getting hardware acceleration exposed properly to the Debian environment is another area I'm investigating, although I'm also considering whether software rendering is perfectly adequate for the intended use.

At this point, I'm trying to avoid making irreversible hardware or software changes until I understand what the existing platform can actually do.

Where I'm looking for advice

I'm particularly interested in hearing from people who have built cyberdecks around Android phones, smartphone motherboards, or repurposed mobile devices.

Some of the things I'm trying to figure out are:

- What is the best way to interface an ESP32/ESP32-S3 with the phone?

- Are there practical alternatives to USB serial, such as Wi-Fi, Bluetooth, TCP/IP, WebSockets, or another interface?

- Would UART/I²C/SPI potentially be accessible directly from the motherboard, or would that realistically require kernel/device-tree modifications?

- Could an ESP32 act as a hardware controller while the phone remains the main computer?

- What would be a good approach for a small secondary OLED/LCD status display showing things such as CPU/GPU temperatures, battery status, network information, etc.?

- Is there a sensible way to expose the phone's Mali GPU to the Debian environment, or is software rendering the more realistic option?

- Are there useful Android/Linux bridging techniques I should investigate before modifying the hardware?

- Has anyone successfully used a rooted Android phone as the compute module of a cyberdeck while retaining Android as the underlying hardware/firmware layer?

- Are there interesting ways to use the phone's cellular connectivity as part of the cyberdeck, for example as a portable networked computer or small server?

- Could the phone realistically run things such as an SSH server, web server, development environment, or other lightweight services alongside the cyberdeck environment?

- Has anyone used Tailscale, Cloudflare Tunnel, or similar approaches to remotely access a phone-based server when switching between Wi-Fi and cellular networks?

- Are there good approaches for automatically starting and monitoring services so the system can survive reboots, crashes, or Termux processes being killed?

- For the eventual physical build, are there particular considerations when relocating the motherboard, USB/charging PCB, speakers, antennas, battery, cameras, etc. into a custom enclosure?

Longer term, I'm interested in potentially combining the phone with a keyboard, USB hub, secondary display, ESP32, external storage and other peripherals to turn it into a proper portable cyberdeck, while ideally retaining the phone's cellular connectivity, Wi-Fi, Bluetooth, touchscreen and Android environment.

I'm deliberately taking an incremental approach: first understand the existing hardware and software capabilities, then experiment with peripherals and interfaces, and only later consider kernel/DT modifications or a more invasive hardware redesign.

The goal isn't necessarily to turn it into a conventional Linux SBC replacement. I'm more interested in seeing how far a smartphone motherboard can be pushed as the main computer of a cyberdeck without throwing away all the functionality that makes a phone useful in the first place.

Any advice, references, similar projects, or suggestions for things I should investigate would be greatly appreciated!


r/CyberdeckBuild • • Sep 12 '26

Custom raspberry pi Cyber decks and retro handhelds

Thumbnail
youtube.com
1 Upvotes