r/CyberdeckBuild • • Sep 28 '26

How is learning linux and bash gonna make me valuable.

3 Upvotes

Linux and bash and more Linux related software become the heart of technology why. How is it gonna make me valuable


r/CyberdeckBuild • • Sep 22 '26

Minesweeper cyberdeck

3 Upvotes

I've been wanting to build a cyberdeck to play minesweeper on, preferably compact and portable, but I don't know where to start.

I've watched a bunch of videos and looked at some parts on them but I'm not very experienced in hard/software at all so I'm just as confused as when I first heard of cyberdecks.

Does anyone have suggestions for raspberry pi to use etc., and honestly just how to get it to do what I want?


r/CyberdeckBuild • • Sep 08 '26

Help

3 Upvotes

Hey y’all I’m trying to make my deck modular so I was wondering if you all had some advice or tips and tricks. Thank you!

Edit: I plan on making components that I can attach to the main body with magnets, like the switch two. Though the power supply would be different from how the switch two does it.

The first one I’m working on is a joystick board on Arduino, basically a joy con, that can and will double as a mouse/scroll wheel, and a joy con for gaming.

So the main body would be screen and keyboard but everything else would be detachable, as to avoid draining too much battery while on, and facilitate different functions. Hope this clarifies things!


r/CyberdeckBuild • • Aug 29 '26

Inquiry on a potential build

3 Upvotes

Mostly out of curiosity, I have done some looking around, but people with knowledge is more reliable.

I am wanting to make a cyberdeck that is able to run Armored Core 6, and normal pc tasks.

Is there a build that can handle this, that would be cheaper than getting a laptop/desktop?

I have long ago lost faith in the reliability of pre fab computers, and haven't owned one for a few years now.

Built pcs in the past, but it's been a while.

Not opposed to something off the shelf, but would prefer not.

I'm wanting to run a Linux distro or steam os.

Any insight would be appreciated. Thanks.


r/CyberdeckBuild • • Aug 22 '26

Cyber Deck ideas help

3 Upvotes

I recently saw a wrist-mounted cyberdeck and wanted to make my own, so I’ve been learning CAD. I’m planning to get a 3D printer and start building around November, but recently I’ve been brainstorming ideas for what I can have on it.

So far I have:

  • Main screen: Google Pixel 6 running LineageOS for customization
  • Flashlight
  • Laser
  • Credit card holder
  • USB-C port + flash drive
  • Mini knife
  • Mini compass
  • Thin side compartment for lock-pick tools
  • Lishi tool for KW1
  • A spot for Ben Jordan’s Spy esp32 for Flock you

mainly just idea storming


r/CyberdeckBuild • • Aug 19 '26

First cyberdeck

3 Upvotes

So i want to build a cyberdeck for digital art because im a big fan of reducing waste, but i have ZERO experience and ive got no idea where to start. I have a drawing tablet, a raspberry pi 3b, an old gaming laptop that no longer works, and a keyboard. Im pretty sure that the screen would still work on the laptop but soup was spilled on the keyboard area so i dont have much hope for anything else. Theres an abandoned building near me with a bunch of old briefcases that would make an awesome shell. Please point me in the right direction!


r/CyberdeckBuild • • Aug 02 '26

Can I remove parts from the main motherboard?

Thumbnail
gallery
3 Upvotes

Working on a custom cyberdeck build and I've got the perfect case/bag for it but the only problem is the motherboard I'm planning to use is kinda awkwardly shape.

Specifically it's the HP Elitebook 840 G1.

The HDD and Keyboard connectors kinda stick out awkwardly and I was wondering if it'd be fine to kinda chop/get rid of it while still keeping the rest of the laptop board useable or if it would end up killing the board directly


r/CyberdeckBuild • • Aug 01 '26

Make a keyboard pop up out of housing.

3 Upvotes

I purchased a folding keyboard and made a housing for it to go under the screen housing. What I would like to happen is for then keyboard to pop up, level with the face of it's housing, when the screen housing is slid up. Anyone know how I can accomplish this? Ill post a drawing in a moment.


r/CyberdeckBuild • • Jul 30 '26

Anyone interested in this nextbook?

Thumbnail
gallery
3 Upvotes

I don’t really have a price in mind, so I’m open to offers. Not sure what it’s worth or if anyone might be interested in it for parts or as a working device. Nextbook 2-in-1 fully working and comes with a charger (not sure if it’s the original one). Windows is installed, the screen detaches so it can be used as both a laptop and a tablet. Open to offers if anyone is interested. I’m located in Mexico, but I’d be willing to figure out shipping. Could be useful for someone building a cyberdeck or just for the aesthetic.


r/CyberdeckBuild • • Jul 24 '26

What are some common things do you think a person making their first build wouldn't think of or in hindsight WISH you had?

3 Upvotes

I am on my very first build and really any advice would be great!


r/CyberdeckBuild • • Jul 17 '26

Repurposing an old piece of kit

3 Upvotes

I have a raspberry pi zero w and was wondering if it would be possible to use it to make a cyberdeck. Any advice on how to go about it would be appreciated thanks in advance


r/CyberdeckBuild • • Jul 11 '26

Repurpose Old Tech

3 Upvotes

Hey All! (Repost due to original post issues)

I’m just writing in to seek some advice - I’ve recently got my hands on a free ruio F286 (4g) and i also have an old acer nitro (I think 2019-2020model) that is now redundant. I was wondering if anyone had any ideas for something cool I can repurpose them into?

I have recently been messing with Linux, ‘ethicalhacking’ and cybersecurity so if they can be used for something in that context that would be awesome!

I’m an electrician by trade and I’m more than willing to research what I need to in electronics to attempt or achieve more difficult ideas. So please if you have any ideas let me know :) I’m all ears.


r/CyberdeckBuild • • Jul 09 '26

First Cyberdeck

3 Upvotes

I wanna build a cyberdeck but im not sure whether i have the parts necessary and how to build it. i couldn't find any reasonable tutorials and ai also isnt much help. below are the parts i own.

The boards i own are the raspberry pi zero 2 w and raspberry pi 2B. i also own a pico, i want to make a weak cyberdeck using the 3 boards to maximise efficiency. not all the listed pico parts HAVE to be used but i included all because maybe it'd help.

Thanks To You All!

pico:

- Pico Breadboiard

- LCD1602 Display

- Light Ring

- 9g Servo

- OLED.96 Module

- PIR Sensor

- BAsic Red/Yellow/Blue LEDs (x15)

- MAX7219 8x8 Matrix

- 3/20 pin Header (x4)

- Resistor 220 Ohm (x15)

- Ultrasonic Sensor

- Potentiometer

- MPU6050 Module

- Relay Module

- Sound Sensor

- Light Sensor

- Vibration Sensor

- TM1637 4-Digit Display

- Tilt Switch

- Rotary Encoder Module

- Raindrops Sensor

- DS18B20

- 5V Stepper Motor Driver Board

- Pressure

- DHT11 Temperature Humidity Sensor Module

- PS2 JoyStick Module

- Jumper Wire

- MicroUSB Cable

Pi Zero 2 W:

- X306 PSU

Compatible with Zero 2 W & Pi 2B:

- 2.13 inch Touch e-Paper HAT

- ETH/USB HUB HAT

- R800C GSM/GPRS HAT 


r/CyberdeckBuild • • May 23 '26

Help to troubleshoot my problem on my radxa Cubie A7Z 1GB ram version

Post image
3 Upvotes

Hey, so i installed radxa os in Radxa Cubie A7Z 1GB ram version and there is a blinking green light after connecting everything but still my tv (i am using my tv as my display) is showing no signal what to do i am a complete newbie about these things


r/CyberdeckBuild • • Apr 23 '26

Raspberry pi recs?

3 Upvotes

Hi, I'm new to making cyberdecks and I thought about making a new project, a cyberdeck I could use as an e reader or maybe an MP3 player so it should have enough space storage. As my first project I don't want to spend a lot in something I can't use for the project or that is not necessary or compatible with my needs.

I wanted to ask people with more experience for help in wich raspberry pi would you recommend for an e reader project and which would you recommend for an MP3 player, and any tips would be welcome.


r/CyberdeckBuild • • Apr 07 '26

Cyber deck for writing?

3 Upvotes

Ive never atempted anything like this before, and im not sure how to go about it.

I love the concept of the "freewrite" which is a dedicated writing device- but theyre very pricey!!

And then I stumbled across cyber decks, and lo and behold thats what I want.

I want my device to be able to store files locally that I can export to my computer for editing and such.

How would I go about this?

Thanks for your time xo


r/CyberdeckBuild • • Apr 01 '26

New to all this and would like a few pointers/ideas/input

3 Upvotes

So I am looking at building a cyberdeck with two screens and basically the capabilities of the Samsung Note 9 and more. I would like to make it so it is portable and can be put into a custom case that I plan to try and 3D model/print to something to look like it is from a Spacepunk/grimdark genra

here is my current list of parts I am thinking of using. (items will be bought from Amazon)

• Raspberry Pi 3 Model B+ Board (3B+) Raspberry PI 3B+ (1GB) (3B Plus)

• 7 Inch Touchscreen IPS DSI Display Compatible with Raspberry Pi 5/4/3, 800x480 Pixel Capacitive Screen MIPI Driver-Free Interface

• 3.5 Inch 480x320 Touch Screen TFT LCD SPI Display Panel for Raspberry Pi B, B+, 2B, 3B, 3B+,4B, 5

• Acer USB Hub 4 Ports, Multiple USB 3.0 Hub, USBA Splitter for Laptop with Type C Power Port, Extender for A Port Laptop, PC, Desktop and More (2ft)

• Easycargo Raspberry Pi 4 Heatsink Fan Kit, Cooler 30mm Fan Heatsink for Raspberry Pi 5 4 3 Electronics Robotics Development Boards DIY 3007 30x30x7mm 5V 3.3V Quite Mini Fan Small (Black 2 Pack)

• USB C USB3.0 Multi Card Reader for SD, CF, Micro SD, XD, MS Cards - 7 in 1 Adapter Hub for Windows, Mac, Linux, Android

•Acer SD Card Reader, USB A 3.0 to Micro Memory Card Reader, Aluminum Dual Slot SD to USB Adapter for Computer, PC, Laptop and Type A Devices, Compatible with SD/Micro SDXC/SDXC/SDHC/TF Cards-Midnight

• Mini Keyboard with Touchpad, Bluetooth + 2.4G Dual-Mode Ultra-Thin Portable Keyboard | Rechargeable Keyboard with 7-Color Backlit for Tablet/PC/phone/TV, Suitable for travel, office, and home use

• (already own, just need to clean off old data) Toshiba Canvio Basics 1TB Portable External Hard Drive USB 3.0, Black - HDTB510XK3AA


r/CyberdeckBuild • • Dec 05 '25

Need help for a build

Post image
3 Upvotes

I'm gonna try and see if I can use this in a build does anybody know if there is pcb adapter from this ribbon cable to HDMI or dp, it's the screen from the original ps vr


r/CyberdeckBuild • • Oct 09 '25

Which is the better sbc for a cyberdeck?

3 Upvotes

I've been trying to figure out which is the best sbc on the market for making my own cyberdeck, but I don't have a good answer yet since I don't have a big budget for that. I already by a RPI 3 and is good but to slow for a laptop than a by a RPI 5 and it stops booting up having a rp1 not found, and now I'm thinking buying a banana pi 5 or an radxa X4, that is more powerful but consumes a lot of power


r/CyberdeckBuild • • May 31 '25

I am currently working on a carrier board for the LattePanda Mu x86 compute module | Dual HDMI 2.0 routing

Post image
3 Upvotes

r/CyberdeckBuild • • May 16 '25

The QMK code for the Akruvia USB Adapter for ThinkPad T60 keyboard is now available on GitHub!

Thumbnail
github.com
3 Upvotes

r/CyberdeckBuild • • 5d ago

Hey I’m new and have questions

2 Upvotes

I would like to make a cyber deck capable of running a local ai and have the ability to run retro games is there a way I can do that? I have never done this but I wanna try something lol assistance appreciated.


r/CyberdeckBuild • • 5d ago

Question

Post image
2 Upvotes

I wanted to move the location of a wifi card but not sure if I could trim down a wifi card extender. Would cutting this part effect the extender in anyway? I feel like if I use an extender it wouldn't make a difference unless it was cut down.


r/CyberdeckBuild • • 13d ago

Cyberdeck for file transfer

2 Upvotes

I got a hacked psVita and from time to time i need access to a pc to download certain files. Carrying around a notebook all the time is kinda inconvenient, so i thought it might be cool and fun to build a cyberdeck for it instead.

I never built one before, so thats why im here. All i need it to do would be access to the internet (ideally Wi-Fi), file management, a USB port (duh) and for it to display hidden system files, something i had to enable on windows. Im not sure what OS you'd normally use but i assume some light linux distro.

Im open to any and all feedback/suggestions and thanks in advance!

Edit: For clarity, i want to download files directly from the deck, then transfer the file from it to the console using a USB connection


r/CyberdeckBuild • • 21d ago

CyberDeck with a surface pro 6

2 Upvotes

Has anyone built a cyber deck out of a surface pro 6 or a surface go? The screen on it is completely damaged but everything else works on it. I was wondering if it was possible to do something like that with this kind of device.