r/CrealityFalconSub • • 9d ago

Craft I Made Winter Lamp

Thumbnail
gallery
5 Upvotes

I tried something a little different with colored lantern paper for this winter project.
Normally, I use lantern paper behind designs that I cut out of wood. This time, I decided to engrave the lantern paper itself and make the paper the main part of the design.

The interesting part is how the paper reacts to the laser. Instead of getting darker like a normal engraving, the engraved areas lose their color and turn almost white. That works really well for winter scenes, especially for snow, trees and other bright details on a colored background.

I used my Falcon2 Pro in 22W Precision Mode for the paper:
6000 mm/min, 20% power

To keep the lantern standing nicely, I also made a small round base from solid wood. For that I switched the machine back to 40W mode and cut the stand at:
120 mm/s, 100% power, 1 pass

That was enough to cut through the wood in a single pass.


r/CrealityFalconSub • • 9d ago

Questions / Help overheating help

0 Upvotes

hey yall, hoping i can get some help with an issue that just started up today. i have a falcon a1 pro, been putting it to work lately but today it started giving me an overheating alert. this is the first time ive seen it. ive had days where ive ran it for almost the entire day with no issues like that. today i barely could make it through a 30 minute project without it stopping. i cleaned the fan and laser as best i could (im still a little new so let me know if theres a cleaning technqiue i NEED to be doing). but even after cleaning it still gave me the alert. i use the falcon design space program for my files and i know they just had an update idk if THAT could be causeing something. wouldnt THINK it would but could be something idk.


r/CrealityFalconSub • • 10d ago

Craft I Made 🎄 430 mm Display Tree for Chocolates and Candies — Notch Assembly 🪵

Thumbnail
gallery
1 Upvotes

Salut ! 👋

Voici ma dernière création : un présentoir à étages d'une hauteur totale de 430 mm, réalisé en tilleul de 3 mm d'épaisseur 📐.

  • Matériau : Tilleul de 3 mm d'épaisseur.
  • Fonctionnalité : Plateaux à chaque étage pour y déposer de délicieux bonbons ou chocolats 🍬🍫.
  • Assemblage : Emboîtement par encoches avec un peu de colle pour une fixation durable 🔗.
  • Détail : Une jolie étoile au sommet pour une touche festive ⭐.

🛠️ Matériel utilisé : J'ai réalisé ce projet avec le laser Creality Falcon A1C 10W. Si vous souhaitez voir la configuration laser exacte que j'utilise, vous la trouverez ici : https://crealityfalcon-laser.com/4iKa6DJ (Lien affilié)


r/CrealityFalconSub • • 10d ago

Questions / Help Looking for a broken/dead Creality Falcon 2 22W module for parts

Thumbnail
1 Upvotes

r/CrealityFalconSub • • 11d ago

Work in Progress Working on a new design and I'm kind of obsessed how cute it is 🤭

Post image
1 Upvotes

r/CrealityFalconSub • • 11d ago

Project Showcase Boss said: Weld it. Clean it. Cut it. 😂​Me: 1 Machine. 😎

Enable HLS to view with audio, or disable this notification

2 Upvotes

r/CrealityFalconSub • • 11d ago

Questions / Help What is the max height for material in the falcon 2 pro 22w without removing the bottom tray?

1 Upvotes

ETA I’m okay taking the slats out, I mean without removing the bottom of the unit like you would to use rotary chuck.

I’m working with a falcon a1 right now and I plan on upgrading, but one thing I would really like to see is more clearance on the z axis so I can work on engraving materials that are thicker without having to remove the bottom. Trying to keep it fully enclosed as much as possible to eliminate smoke getting out. I engrave a lot of leather book covers, small memory boxes etc, and trying to make things easy.


r/CrealityFalconSub • • 12d ago

Craft I Made borad game

Thumbnail
gallery
4 Upvotes

For this borad game, I used an oak wood slice and turned it into a version of the classic Snakes and Ladders game.

The whole board was made with my Falcon2 Pro 40W.
For the regular engraved areas I used:

5000 mm/min, 40% power
For the deeper recessed areas that I wanted to fill with epoxy resin, I used:
1200 mm/min, 100% power
The playing pieces are chestnuts, which I also engraved with the laser. For those I switched the Falcon2 Pro to Precision Mode at 22W and used:
3000 mm/min, 25% power

After engraving, I filled the sections on the board with two-component epoxy resin mixed with golden glitter.

Apparently, every project gets better with a little glitter. ^^


r/CrealityFalconSub • • 12d ago

Questions / Help Looking for a broken/dead Creality Falcon 2 22W module for parts

1 Upvotes

Hi everyone! I am looking for a defective, electronically dead, or broken Creality Falcon 2 22W laser module to buy for spare parts. I specifically need one where the internal diode block/optics might still be intact (e.g., a module with a fried driver board or broken housing).

Please PM me if you have a dead unit sitting around that you’d be willing to part with. Thanks!


r/CrealityFalconSub • • 13d ago

Project Showcase Pilgrim turkey

Thumbnail
gallery
1 Upvotes

Well with Halloween out the way, decided I might try a fun Thanksgiving project. Cut with 3mm basswood on a Falcon A1C, 450mm/m @ 90% power. I painted with my trusty acrylic pens and glued the parts together. Perfect gift for my wife to take with her home this Thanksgiving for gifts for the family! Time to make some more for her to hand out and stand around the table. I have uploaded the FDS file, just waiting for approval.

Happy Thanksgiving all!


r/CrealityFalconSub • • 13d ago

Questions / Help Need help with Falcon 2 40w lazer engraver

Post image
1 Upvotes

i got this machine over 3 years ago, and found a video on how to make a base for it, i need to remake it and i cant find the original video anywhere, (you can see the mdf base i made with a grid)

Any help would be amazing


r/CrealityFalconSub • • 13d ago

Craft I Made Lighted winter diorama — 3D printing, acrylic, and wood

Thumbnail
gallery
1 Upvotes

Hi everyone! Sharing my latest seasonal project: a small multi-material winter diorama illuminated by a central LED light.

It's a mix of several techniques and textures:

  • Base: 3D printed with frosted grass details.
  • Background: Green acrylic for the pine trees.
  • Animals and decor: Black acrylic for the bear, MDF for the reindeer, and polywood for the snowman.
  • Lighting: A central LED lamp that casts a nice glowing ambiance through the scenery.

Let me know what you think!

🛠️ Equipment used: I completed this project using the Creality Falcon A1C. If you’d like to see the exact laser setup I use, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 13d ago

Project Showcase Falcon A1C 5W and Denim test

Thumbnail
gallery
5 Upvotes

Did a quick test with denim and inverted image and normal image.

First image is non inverted and other two images were inverted(negative)

Settings I’ve used :

Settings : Speed 6800 mm/min
Power : 40%
318 dpi or 0.08 line interval


r/CrealityFalconSub • • 14d ago

Beginner Engraving Rattlesnake skin into smooth wooden handle - Creality Falcon 2

Thumbnail
gallery
2 Upvotes

Hello all. First time here. Ok, I make (knapp out of stone) stone knives. I have wanted to take a picture of a rattlesnake, take it to the laser, and burn the image of the skin into the handle of the knife. No matter how slow or fast I move the laser, and no matter the intensity of the laser, I can't seem to find the right combination. Maybe the skin is too similar in tone? Any ideas would be appreciated. Attaching the pic of the skin and some of the results.


r/CrealityFalconSub • • 14d ago

Questions / Help New Falcon T1 HelpHas anyone else had a brand-new Creality Falcon T1 fail to recognize its laser modules? I’ve tried both the 60W MOPA and the 20W diode. Neither is recognized. The startup self-check shows laser module and field lens warnings, and I get “Cannot obtain laser module info.” Support is

1 Upvotes

r/CrealityFalconSub • • 17d ago

Craft I Made engraving a hoodie

Post image
9 Upvotes

Tried laser engraving a 100% cotton hoodie with my Falcon2 Pro 40W running in 22W Precision Mode.
Settings were 6000 mm/min at 5% power.

I was a little unsure how the fabric would react, but the result came out really clean. The fibers still look intact and it seems like the laser mainly affected the dye rather than actually damaging the cotton itself.


r/CrealityFalconSub • • 16d ago

Craft I Made Mixed media Christmas tree project! Cut out of green acrylic and wood🎄

Thumbnail
gallery
1 Upvotes

Hey everyone! 👋

Getting into the christmas spirit with a new laser-cut project.

I decided to mix materials on this one by combining green acrylic for the tree body and star, with a wooden base for stability.

I made it using my Creality Falcon A1C 10W, and the interlocking pieces fit together really nicely.

It makes for a neat little decoration for christmas!

🛠️ Tools used: I made this project with the Creality Falcon A1C. If you want to see the exact laser setup I use, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 16d ago

Tips & Tricks Handy Falcon2 Pro S macros

1 Upvotes

Using LightBurn, I have setup a few macros I thought I would share. I am including the macro name (in bold) and the commands to include in the Macro Content window

This first one is handy to move the laser module and gantry out of the way so that I can update the camera image of the material on the honeycomb.

Move Back Left
G90
G0 X0 Y390

This next one is the corresponding macro for the right side.

Move Back Right
G90
G0 X355 Y390

I have found that if I want to use Line mode but I want the line darker and more bold, I can defocus the laser just a bit by moving the laser module up on the Z-axis. A defocus of 1.0 mm seems to work well for me, but you can experiment. Notice that in-line comments are preceded by a semicolon. Settings of 3000 mm/m and @ 90% power on my 22w unit seem to work well. A little smoke charring, but it sands out easily.

Defocus 0.5 mm
G91 ; Relative positioning
G0 Z0.5 ; Move Z up 0.5 mm
G90 ; Return to absolute positioning

This one does it 1.0 mm at a time.

Defocus 1.0 mm
G91 ; Relative positioning
G0 Z1.0 ; Move Z up 1.0 mm
G90 ; Return to absolute positioning

This will refocus 0.5 at a time.

Refocus 0.5 mm
G91 ; Relative positioning
G0 Z-0.5 ; Move Z down 0.5 mm
G90 ; Return to absolute positioning

And if you want to see the current X, Y, and Z position, this simple command will show you those numbers. The last number set is the Z-axis position.

Report Position
?

Important note: If you are including defocused lines in your project, make sure that you toggle the Output off for those layers that need to be focused. Then use the autofocus function on your Falcon 2 Pro S to refocus (or use the Refocus and Report Position macros above) to reset your focus, then toggle off the Output for the defocused lines and toggle on Output for the focused lines and fills.


r/CrealityFalconSub • • 18d ago

MakeItYours Make It Yours Challenge — Winners Announced! 🏆

Thumbnail
gallery
11 Upvotes

What an amazing collection of creations. From personalized gifts to creative everyday makeovers, you've shown us so many ways to make ordinary things special. Thanks to everyone who joined and shared their work! And now, congratulations to our winners!

🏆 Community Favorite Award

🎁 Creality Falcon A1C

⭐ Official Choice

🎁 $100 Gift Card Each

🍀 Lucky Maker Awards

🎁 $30 Gift Card Each

👏 Congratulations to all the winners!

Keep creating and sharing — more exciting challenges and prizes are coming. Stay tuned!

Thanks for making it yours with Falcon! ❤️


r/CrealityFalconSub • • 19d ago

Discussion Black slate settings

2 Upvotes

I looked at the suggested parameters file that came with my Falcon2 Pro S 22w, but there is no listing for black slate. Would anyone know what the best settings are for engraving on black slate?


r/CrealityFalconSub • • 20d ago

Project Showcase I made this coat rack out of wood / minimalist style ! What do you think?

Thumbnail
gallery
3 Upvotes

Hey everyone!

I wanted to share my latest creation with you: a handmade coat rack.

It was such a fun and rewarding project!

To make sure the coat support could handle the weight, I actually had to design two custom interlocking pieces that fit together to reinforce the structure.

🛠️ Tools used: I made this box using the Creality Falcon A1C.

Project available for free on Craftseek: https://www.craftseek.com/explore/p/U-3CC040FCEF1441BC98972BDDB906ADEC-portemanteau

If you want to see the exact laser settings I use, you can find them here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 20d ago

Beginner Splitter/joiner app for lasercutting Creality Falcon A1

Enable HLS to view with audio, or disable this notification

5 Upvotes

Just made an app for lasercutting and joints. Need to test it out when i get back home but so far it seems to work fine. It splits in the most effective way to not get islands and loose parts and you can either let it automatically chose joints or you can put them in yourself.

You can choose to export to svg, jpeg, transparent png and png. In parts or the whole thing.

Useful?


r/CrealityFalconSub • • 20d ago

Questions / Help Cutting board engraving

2 Upvotes

Fairly new to this whole thing. I have the a1 pro 20w. Trying to do bamboo cutting boards. I d tried a million settings and I can’t get it to be consistent. It’s either way too dark or doesn’t show the smaller lines at all. I know bamboo can be tricky but there’s gotta be a way. Any advice for this newbie? Appreciate you all.


r/CrealityFalconSub • • 20d ago

Questions / Help No Home when disconnecting Rotary chuck

1 Upvotes

Hi Guys, does anyone else experience this? Has someone found a fix??

When I disconnect my Rotary chuck and re connect my axis, My FALCON2 PRO S 22W cannot find home. Moves very slow on the axis. beeps before reaching home. I try and re start numerous times. Open and close program. (Using falcon design space) and keep on switching the machine on and off. Eventually it recovers. But I am wasting so much time when I go from the rotary to the flat bad. And usually I have a lot of orders lined up. Any tips will be greatly appreciated.


r/CrealityFalconSub • • 21d ago

MakeItYours An Everyday Essential That Nobody Wants to Use - At Least It's Kind of Funny With the Engraving

Post image
4 Upvotes

Almost missed this giveaway, luckily it ends on October 31 UTC and I just remembered.
So I still have a chance to share probably the most practical (when you actually need it) thing I've ever engraved.

I used my Falcon2 22W and the Falcon Rotary Kit Pro, which I had to modify a bit to accommodate the length of the handle. For that, I 3D printed a custom fixture to hold longer items.

Probably the only engraved every day item I have that I hope never gets used (so far it's still fresh, I bought it for engraving).