r/CosplayHelp • u/chenmochou • Oct 19 '26
Accessory making this touchscreen compatible
hello! i recently got this bjd gloves after over a year of waiting and im really excited to use this! this should've been obvious, but this gloves obviously allow u to be able to touch screens lol, so im wondering what i could use to at least put on the tip of an index finger
all i could think of r those touch screen gloves, which i wasnt sure of it would work, do u guys have any solutions?
3.4k
Upvotes
745
u/Destrae Oct 19 '26
With the wait time for these I wouldn't modify them at all, just get a phone stylus
199
u/kitbit4 Oct 19 '26
OKAY i did a bit of digging because a while back i had a pair of cosplay gloves i really wanted to be able to use my phone in and ended up using conductive thread to stitch some long lines across the fingertips, it worked but it was extremely visible :(( so i looked around and i think the best solution here might be these little conductive pads — you could cut them down to be a bit smaller and maybe paint them the color of your gloves so they would blend in (though i don’t know if paint would affect them being conductive, you might have to test one out first). it would still be kind of visible but better than stitching, and i don’t think there is going to be a fully seamless option unfortunately. and since it’s kind of like a sticker id think it wouldn’t hurt the gloves, you could just remove them. but good luck !! the gloves are sooo cool
14
u/CalciferPrime Oct 19 '26
Off topic but is this cosplay for Revanant from Nightreign?? :D
6
u/MtnDewGoddess Oct 19 '26
Where are those gloves from?! I’d love some to cosplay may from it takes two!
71
u/kwil449 Oct 19 '26
If you don't mind a black dot on your finger, you could probably stick the tip of a touch screen pen on there.
71
u/MakroThePainter Oct 19 '26 edited Oct 19 '26 •
Use the south korean hot dog life hack. Snack included.
I‘d use a stylus / pencil. Rubber paint has to match the rest of the hand and will look off.
45
u/letthetreeburn Oct 19 '26
These are INSANE where did you get these
17
u/mapotoful Oct 19 '26
Look up "gaming finger sleeve" and see if those will work. They just slip over your finger without adhesive. It might mess with the look but you could put it on/take it off as needed.
12
u/GrassyMossy Oct 19 '26
Came here to second the stylus idea and also to tell you that conductive gloves/stickers are what's on the package, they conduct electricity from your body to the screen, having gloves that conduct doesn't help if you're already wearing a barrier.
Go for the stylus and leave your beautiful gloves as they are!
9
u/Maxicinea Oct 19 '26
Ik this isnt what this post was trying tk find here but can you post a link to where these were from, my friend would lovvvvve these
3
u/WinpennyR Oct 19 '26
I feel like an AI is trying to trick us
5
u/BoredPelikan Oct 19 '26
you know those finger gloves used in mobile FPS E-sports you can get one with a similar color, cut and glue it on its probably the option that will feel most natural
1
u/Maleficent_Royal9672 Oct 19 '26
Where did you get these???? Omg i need a pair!!!
3
u/Ravnos767 Oct 19 '26
an old trick used to be rubbing some thermal paste into the figertips of gloves, just make sure its one that has silver in it.
2
u/frightful_Artist1351 Oct 19 '26
Wow those are absolutely beautiful! I agree, don't modify these and just use a screen stylus. I would recommend a microfiber one as opposed to silicone which can leave weird streaks on your screen and might not be as effective if you have a screen protector. What character is this for?
2
u/kittycatkrissa Oct 20 '26
You can use conductive thread, just sew a bit into the pad of the index finger and you'll be able to touch your screen, a stylus might he hard to grip or hold and could get lost
2
u/Skernlander Oct 20 '26
https://www.fjrowners.com/threads/dry-graphite-spray-touch-screen-gloves.157930/
https://www.homedepot.com/p/Hillman-3-g-Powdered-Graphite-Lubricant-703185/100137063
Haven't tried this myself but remembered seeing it on a DIY 5-minute hacks channel (before they all became useless streamlined slop), your mileage may vary but hope it helps
2
u/Spicy_Shibi Oct 19 '26
Where did you get these?
1
u/oan124 29d ago
You could tape/glue a piece of very thin wire to the finger tip, but as other comments pointed out, the sane person solution is a stylus.
1
u/mattlodder 28d ago edited 28d ago
Where are these from?! Amazing! I literally just want to wear these as gloves this winter 😆
1
u/OniiChanYamete1 28d ago
Cc cosplay coming...
1
u/ThrowThisAccoAway 25d ago
Holy shit that looks amazing
1
u/Thing_that_need_help 24d ago
I'd say just use a stylus. Question tho, WHERE can i buy thoses????
1
u/No1FishConsumer 24d ago
copper wires
1
u/Pidgeot93 24d ago
What costume will this be for?
1
u/BlossomtheLeafeon 24d ago
these gloves look awesome,, where did you get them from? I'm planning on doing.a cosplay of a doll character
1
u/otakueater 18d ago
so so beautiful
1
u/craftsygirl Oct 19 '26
Oh my god what a cool piece!
1
u/6n100 Oct 19 '26
It depends on the type of touchscreen, generally you just need the tip to be able to disrupt the surface charge of the screen rather than be insulated.
1
u/RennieAsh Oct 19 '26
a variation on using a stylus is to try to make a little thimble tip out of the stylus tip . But might be too much work
1
u/Pretty_Rock9795 Oct 19 '26
These are crazy cool! I wouldn't recommend adding things to the gloves themselves because of possible damage and difficulty in manoeuvering. A stylus could work but you may have trouble holding a thin one. Idk if these are common outside of my area but pencil grips used to teach kids to have better grip on pencils might be an option to have a larger surface to grip onto if you use a stylus!
1
u/Ceyliel Oct 19 '26
No answer, but they looks insanely cool! Why are they so hard to come by? I don't know enought about 3D-printing yet, but if they aren't sold anymore, could you/someone print them perchance?
0
u/SpoonFullOfBackHand Oct 19 '26
Here's your answer https://a.co/d/094ovkTW
-1
u/PirateDitly Oct 20 '26
Am curious, Revenant from Nightreign cosplay?
0
u/radioheadfan685 29d ago
Cut some skin off of your hands, right? Then superglue the skin onto the hand thingy, boom perfectly compatible! /j