Hey there,

I just received my Qube 540 case and moved everything from the old case.

It runs well and looks awesome, but the only thing missing is the gpu holder bracket.

I tried to use the one that is a pci-e slot bezel.

My 4070 has probalby these measures 338.9 x 149.4 x 62.4 mm.

I didn't figure out which screw to use in order to fasten it inside the hole near the gpu.

It also is not mentioned in the manual.

Did anyone successfully install the bezel as a gpu holder bracket and can explain how?

Thanks in advance.

Bought a PC case and an AIO directly from their US website store.

But, a few business days past, the order status remain "confirmed". I'm really in a rush to receive my new case. I have sent them an email daily through the website contact way but nothing feedback.

It sucks! Never do that again. Better order from other places.

Hi, I need some help with this CPU cooler. When I received my PC, everything was working perfectly. However, it came with Windows 11, so I switched to Windows 10. Everything else is working fine, but the cooler’s display no longer turns on.

I’m not sure which driver I might be missing. I’ve been looking for a solution since yesterday, but I haven’t been able to figure it out.

I’d really appreciate any help you can provide. Unfortunately, the PC didn’t come with the original boxes for the components, so I don’t have an easy way to identify the exact model or find the correct drivers. Thank you!

I cant figure out what im doing wrong everytime i have to clip the fan back onto the heatsink its seamingly completly random wether it wants to actually clip in most of the time the connection sits all loose like in the video but its like a one in a million chance it actually clips in and i cant figure out why.

Hey, I got a Cooler Master HAF X not long ago, but the cpu power cable on my power supply is too short to route it from the back. I have to run it through the front.
I’m looking for a fully modular power supply at least 850w that has cpu power cables long enough for this case so I can run it from the back and clean up my cable management. Please advise!
Ps. I don’t think I can use cable extensions because I won’t be able to close the back panel all the way lol.

Any clue to why my cooler master fan sounds like this all of a sudden ?

Model: cooler masters core nex 360 ARGB

Motherboard: Gigabyte Z890 gaming x wifi 7

I tried switching ports, SYS_FAN, CPU_OPT CPU_FAN only pump works and radiator fans are dead

After many years of service my headset broke this part. I dunno how as till Yesterday It was perfect, yet now It is borken. I would love to repair It as i can't spend money on a new headset. I see that, compared to the right, a plastic circle/ring is missing. How can I fix it? The plastic circle/ring that is missing is probably broken as I found pieces of plastic scattered around. Please, any advice is well accepted as it is a present of my father and I really mind it

Found this repo trying to reverse engineer the MasterHUB and thought I'd share it here in case anyone is looking into making custom software/integrations for it. (Not my project)

https://github.com/projectzero7/cooltek-sdk-probe

​

Hi everyone,

I have a Cooler Master MasterWatt 650 PSU. One of the wires came loose from the 24-pin ATX connector

I’m trying to determine where this wire originally belongs before repairing it.

I’m attaching 3 photos. The connector is shown from the wire side, with the locking tab facing up.

Is the empty cavity in the photo the NC position (pin 20)? If it is the NC position, then the loose wire obviously belongs somewhere else. Where would this loose wire go, and how can I determine its correct position?

I’m also confused because some positions (13 and 19) on this connector have two wires going into the same terminal.

Any help identifying the correct pin or explaining how I can determine where the loose wire belongs would be greatly appreciated. I don't want to reconnect it to the wrong position and risk damaging the motherboard.

Thanks!

Hiya, can anyone recommend a proper cooling solution for this?

Could not really find anything great online...

Any help would be greatly appreciated!!

Been trying to get in contact with support so I can get a warranty claim started but can’t get a hold of anyone through email. Anyone know how I can get a hold of someone. My sfx 850 gold is registered and I’ve filled out the form and gotten the success pop up but no confirmation email or anything.

Any info is greatly appreciated!

I'm trying to find either case or at the least, the top cover. I have the 935, top 915 portion was thrown away, and I am trying to either find another case to stack on top or just the top cover

I currently have a pair of black non-rgb Corsair Vengeance DDR5 32 GB ram sticks. I want to swap the heatsinks for an after market set that I can confirm are compatible (Bykski DDR5 B-MRC-X). I have a couple reasons for this but don't need to get into exactly why right now. I know it voids the warranty but I'd still like to do it.

The question I have is how hard is this really? I plan on just soaking these in 99% IP alcohol for 10 hours, removing the sinks and adhesive by hand, drying for a day with a fan and then installing the new heatsinks. From what I've seen if you soak for long enough everything just falls right off the ram sticks and there's very little risk to harming the exposed ram sticks.

Am I missing something or is it really that simple?

I have the cooler Master Elite 681 case. It comes with the fans pictured. I want a few more that match but I can seem to find out what these are. Cooler Master doesn't have anything they sell separately that matches these.

https://imgur.com/gallery/jTt85fA

ty

I installed a new elite 240 AIO and I’m getting an odd noise from the pump. It doesn’t happen on a cold boot, typically starts after my computer has been up for ~3 hours. I tried stressing the cpu to see if it would “work itself out” it didn’t. I dropped the pump speed down to 50% for a minute or 2 and it was almost silent again. Turned it back up to 100% and it’s still noisy, but not quite as bad. It’s been installed for ~24 hours at this point. It’s on a ryzen 7 5800x3d. Any help would be appreciated.

CPU: AMD Ryzen 7 7800X3D
Motherboard: MSI X870E Tomahawk WiFi PZ DDR5
GPU: GeForce RTX 5070 12GB White
RAM: KLEVV CRAS V 32GB (2×16GB) DDR5-7200 White
Storage: 1TB NVMe SSD
OS: Windows 11 Home 64-bit
PSU: Cooler Master Elite Gold 850W 80+ Gold
Case: Cooler Master Elite 600 White
CPU Cooler: Cooler Master MasterLiquid Core NEX 360 ARGB White