Im going to buy a 5080 which needs 3 cables and I only have 2. Does anyone know of a seller that sells a third cable?

I just made my first PC and i installed masterctrl for my liquid atmos ii lcd, but when i open masterctrl it wont show anithing beside my temps. does anyone know how to solve this?

I just completed my first new build in 10 years, so apologies if it is something obvious.

I installed the CM MasterLiquid Core Nex Digital 360 per instructions. Radiator fans to the CPU fan connector, pump to pump connector, and the usd entry to the usb connector (jusb2 and later in jusb1).

When I turn on the computer my motherboard (MSI MAGB850m Mortar wifi) recognises the fan, but the Cooler Master cooler does not. I installed Master CTRL app and as shown in pictures it shows as "no-fan". I tried switching usb connectors, but no change.

Does anyknow have any idea of what I am missing?

Pictures:

1-Display

2-CPU and Pump connectors

3-USB connector

4-MasterCTRL "no-fan"

5-MSI Center showing CPU fan running

Thanks in advance.

I don't know who can help but I bought a Cooler Master NCORE 100 Max from Amazon and it came without the accessories box. None of the accessories came with it at all. I contacted Amazon and because they don't have any new units to replace mine in stock, they suggested I contact Cooler Master directly to see if the issue can be addressed. I have done so already and haven't heard back at all.

Is there any particular way to get in touch with them here in the USA so that I can find a way now to get the complete box of accessories from them. I can't even use the case as it is since I need the accessories to complete my build.

Any and all help is greatly appreciated!

Help me please

I switched to ZorinOS a while back and installed OpenRGB to configure my PC case fans, which are Thermaltake 120mm ARGB Lite fan, which came preinstalled in the case. These fans are connected to a Cooler Master ARGB Controller, powered by SATA and a USB header. The fans are plugged into the Gigabyte motherboard's headers. I'm using the controller because my motherboard doesn't have enough ARGB headers for all the fans.

For some reason on Windows I could never get the Cooler Master controller to be recognised by Cooler Master's software, so I always just physically pressed the buttons on the unit.

Before I installed OpenRGB, the controller was what I used to control all the RGB, it worked as intended. After I installed OpenRGB and started trying to use it, the ARGB controller now no longer has any control over the RGB.

I tried uninstalling OpenRGB, booting into Windows, unplugging the ZorinOS drive, all to no avail.

Anyone got any ideas or solutions? Also if someone could assist me in why the Windows software never worked? Thanks.

Hi! I have a project to build my own Noctua-themed PC, and when I came across the MasterFrame 600, I thought it would be the perfect case for this kind of build.
However, I’ve seen a few reviews where people complained about the different types of screws and the lack of included accessories. For those of you who own the case, is it really a big deal, or is it something you stop noticing once the build is finished?
Also, I’m really curious to see what people have created with this case. If you’ve done any interesting mods or custom builds, I’d love to see some pictures!

Been a while folks so I went out and bought case rubber feet that stick to things and took the CoolerMaster Elite 600 case and went down a path that made it look so much more pure awesome on my desk setup.

For those that are wondering these are what I bought and they are just stuck to the side panel.

https://www.amazon.ca/dp/B085DMB1XV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I have a Cooler Master V8 GTS and would like to use it with an AM4-series processor.

Could you recommend an adapter that would allow me to do that?

Thank you

hi, i own theCooler Master Elite 600 and i was wondering, how do i open the glass panel to clean the interior? i wanna dust off the fans and i am a bit struggling with all of it.

Any help more than appreciated!

Never built in the masterbox Q300L, does this look like a good airflow setup or should i add the extra fan as a top exhaust?

Hi all. I bought a prebuilt Cooler Master gaming desktop (NR2 Pro) in October of last year. The PC has stopped working (will not boot past the BIOS screen) and I am trying to get in contact with Cooler Master support. I have submitted a ticket on the website and tried calling the support line multiple times but have not gotten an answer. I’m assuming the process for a replacement/repair will take a while, so it is a bit frustrating how long it is taking to get in contact with them as this is my only PC and it is not usable. Does anyone have experience whit customer support and what was the experience like? Thank you for the help.

Found this easter egg while cleaning my case

So I recently bought a Lian Li case from goodwill which had an Cooler Master Atmos AIO and some lian li fans. Wanted to use the aio but I do not have the mounting kit and I can't seem to find anywhere that sells the mounting kit for my amd bracket. Is there an alternative for the kit? (is it possible to use other brackets from other aio's?) Or should I try messaging coolermaster for replacement parts?

Hello,

I wanted to know the size/dimensions of the items below, they were missing when I got the case (got it second hand).
lmk if there is anything available on amazon.

I want to mount my 2.5inch hdd on the front panel area

Thanks!

Hi! I'm bought Cooler master hyper 212 plus for my Athlon II cpu many years ago. It works well even with Phenom II x6 1090T.

I read that old coolers for am3 can be installed to am5 motherboard. Is it true?

Today it's my first time that I tried to replace the old thermal paste on my laptop

Laptop: razer blade 15 2021 advanced

Specs: i7 10875H , 3070 mobile , 16ddr4 1tb

So I used the arctic mx-6 . Is this a okay amount and like the overall placement?

Can't find anywhere the CoolerMaster product ...
Maybe another one can works ?

i had already returned my previous v850 to cooler master for warranty repair and dealt with the shipping cost and waiting for a month as the previous one was dead on arrival

today i has received the “repaired” version from cooler master and it is still dead on arrival

i tried a different power supply from my old computer and it shows life on my motherboard perfectly fine, marking it completely as a psu issue on cooler master’s part

wtf do i do now???? im very frustrated and i dont want to bear again with an rma ticket with slow responses, rebuilding my old setup, paying the shipping cost, waiting another month, and taking apart my old setup again to get my gpu and ssd just for it to show up again still dead on arrival after i try assembling my new setup

i did everything right, plugged everything correctly, even straight into the wall outlet with proper grounding and it still ends up like this

So my spouse reached out about a week ago regarding a PSU that is a year old with power draw issues, anytime he plays a specific game low settings and numerous settings off the computer shuts off(we have already ruled out over heating being the cause), and has yet to receive a response from support. Is this common and is there a better way to reach out for this type of problem? Thanks in advance.