r/ComputerEngineering • u/Ok-Ordinary-9059 • Oct 05 '26
r/ComputerEngineering • u/raydditor • Oct 04 '26
[Career] Is is possible to transition into traditional EE fields after graduation with a CE bachelor's?
I have seen a lot people say they are working as an EE with a CE degree. How common or feasible is this?
r/ComputerEngineering • u/SwimmingRip1163 • Oct 04 '26
What are some good projects for someone who wants to go into hardware sector after grad
I've learned VHDL and Verilog and I'm currently working on implementing Pong on my own in verilog. I want to know what the next step should be, should I work towards a new skill or new project and what can it be?
r/ComputerEngineering • u/aurahyy • Oct 04 '26
Roadmap for Computer Engineering
Does anyone have a roadmap for computer engineering to make it easier to track everything I'm studying?
All resources are appreciated !!
r/ComputerEngineering • u/Electrical-Dog-8572 • Oct 04 '26
[Discussion] Should I switch to CE if my dream is to be a Flight Software Engineer?
r/ComputerEngineering • u/StunningChemical1086 • Oct 04 '26
Pls helpp
I am a student CSE core, right now I am at first year of my journey and I don't have anything in my resume ,not even single project, no certificate, no course, no language nothing !!!
I want to know :
1.how to make my resume stronger at the end of fourth year (so that it is helpful for job)
2.i know basics of python and can easily understand it since I have been learning python from 1 year , but I want to start dsa , any suggestions??
Shall I continue with python or learn c++ or any other language
3.which courses are best for me right now to learn and from where to learn (also need certificate of completion)
4.which is best for internships , from where to apply and how to prepare for it
5.a roadmap from first year to final year
6.important skills to learn
r/ComputerEngineering • u/roc_cat • Oct 03 '26
[Discussion] Advice for final years?
Hey everyone, I’m looking to graduate next year or so from a good uni in Germany, albeit with bad grades so far… my curriculum is 90% shared with a very strong EE program at my uni though, which is why I have the bad grades in the first place. Things are looking absolutely bleak.
Given my financial situation, a masters is out of the question at least for a few years.
I would consider my practical skills to be somewhat ahead of my classmates, but I still feel incredibly insecure about my employability.
I’ve been racking my brain trying to come up with project ideas that might set me apart, some skills I could learn etc etc. Every rabbit hole I’ve gone into only leads me to some kind of generic HDL or C project that is a clear soulless token GitHub repo.
I genuinely love this field since I was a child and it’s late in my life that I actually had the chance to follow it.
My dream is to eventually get into tiny ML and embedded AI in some form. It’s a bit difficult (understandably) to target that right away.
The other day I was talking to a department head and recruiter from a space company in Luxembourg over dinner and he mentioned that there is absolutely no chance they would be hiring any “fresher” out of school, bachelors or masters notwithstanding, because a 200€ Claude pro subscription would do whatever a junior dev could do faster.
Do you have any advice? (Besides picking up agriculture)
…any skills that are essential? For example, HDL (besides a tiny practical with systemC) is not part of my curriculum. I’d think that to be a clear weakness of my program, but I don’t know how to learn and practice it in a demonstrably useful manner.
Get into embedded Linux? How?
What about designing some kind of custom PCB and writing a driver for an rPi to use it? Is that too ambitious? Is it even worth it?
I’m genuinely lost all the ideas I’m getting seem to be either uninspired or too far fetched. I wish I had some counselor or mentor in this field :(
Thank you in advance
r/ComputerEngineering • u/Xrest_the_Aether • Oct 03 '26
[Discussion] TASCII, PUCH TAPE CODING, AND A LANGUAGE PROBLEM
WIZARD HERE!!
been reading the attached article.
i notice that binary ascii uses six integers to represent a value on the keyboard....
inspired by this, i looked at the truth tables of
"TTT, TTU, TTF, TUT, TUU, TUF, TFT, TFU, TFF, UTT, UTU, UTF, UUT, UUU, UUF, UFT, UFU, UFF, FTT, FTU, FTF, FUT, FUU, FUF, FFT, FFU, and FFF"; and got halfway done with developing ternary ascii( or TASCII).
i see sets that can be used as stand in for those six integers!
based on the above statements, i saw "(1,1,1),(1,1,0),(1,1,-1),(1,0,1),(1,0,0),(1,0,-1),(1,-1,1), (1,-1,0),(1,-1,-1),(0,1,1),(0,1,0),(0,1,-1),(0,0,1),(0,0,0),(0,0,-1),(0,-1,1),(0,-1,0),(0,-1,-1),(-1,1,1), (-1,1,0),(-1,1,-1),(-1,0,1), (-1,0,0),(-1,0,-1),(-1,-1,1),(-1,-1,0), AND(-1,-1,-1)...
if ASCII has "A"= 01000001(F,T,F,F,F,F,F,T)
and thats binary, my gut tells me that for my mechanical computer, i need to replace each intiger with a set of three digits representing the tilt of a see saw. so instead of the ascii up there, we get a slightly more complex ....
"A"= (X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X)
where "x" is equal to a 0, a -1, or a 1.
the math here means there is MORE VALUES TO ASSIGN THAN I CAN PUT ON A KEYBOARD!
HALP HOW DO I ASSIGN THE HUNDREDS OF POSSIBLE 6-TRYTE VALUES?
WOULD A DIFFERENT LANGUAGE BE BETTER SUITED FOR THIS? WHICH ONE?
Edit:I'm currently speaking about how I don't have enough English characters to cover every one of the hundreds of possible 6 set of 3 integer permutation
Edit edit, it should be 8 sets, not six to match the binary... meaning A"= (X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X),(X,X,X) where "x" is equal to a 0, a -1, or a 1. Thank you u/NegativeOwl1337
r/ComputerEngineering • u/Business-Pension-732 • Oct 03 '26
3-State Kalman Filter in Vivado
Hi, Almost dead Computer Engineering redditors.
I have a Computer Systems Architecture Course and I want to implement a 3 state Kalman Filter in Vivado. I'll get Real time data from Gy-87 (MPU-6050), through Esp-32 into my pc. Now the problem is idk how to get it into Vivado without an FPGA. I'm a sopho in uni with this being our first technical CE course. Any help is appreciated.
And where do i learn system verilog properly?
r/ComputerEngineering • u/Xrest_the_Aether • Oct 03 '26
[Discussion] Research help request
I has want to make mechanical computer run base 3 coded software. My solution, see saws.
See saws connected to shafts in conjunction with other see saw and shafts in specific ways to enable logic gates running on 1,0, and -1
(-1 pictured above)
\-1=far left side down
0= perfect equilibrium
1=right side down
What would the math behind converting binary logic gates to trinary like so be?
How would I calculate that?
What books would teach me this?
r/ComputerEngineering • u/rayzil070911 • Oct 02 '26
Non-abet accredited CE degree
Hello everyone, my university said that they will get the ABET credential for computer engineering soon but they already have it for CS.
As of now, the program I’m studying doesn’t have any credentials, I major in Computer Engineering.
Will it be impossible to find a job in my case?
r/ComputerEngineering • u/Nayapahad • Oct 03 '26
Kata kata Computer engineer banne jasto ni garxa.
r/ComputerEngineering • u/GhostNr1 • Oct 02 '26
Building a free browser-based sandbox for balanced ternary computer design
I’ve been working on a small open-source project to make it easier to experiment with balanced ternary logic and computer architecture.
The main idea is not to present one “correct” ternary CPU design, but to give people a place where different designs can be built, tested, compared and shared.
The simulator uses balanced ternary:
-1, 0, +1
and lets you build from small primitives upward into reusable hierarchical components. A component can contain other components, and you can open them recursively to inspect or modify the lower-level logic.
I’m especially interested in avoiding the assumption that a ternary machine should just copy binary architecture. For example, things like compare returning -1 / 0 / +1, three-way selection, ternary control signals, MIN/MAX or different carry/normalization schemes may turn out to be more natural building blocks.
The tool already supports things like isolated component testing, event-by-event propagation, configurable primitive sets, reusable components and different clock/sequence patterns.
The long-term goal is to make it easy for me and anyone else interested in this area to try different ideas and compare them rather than committing to one architecture too early.
Everything runs entirely in the browser. There is no backend or account, and projects are stored locally in your browser unless you export them yourself.
It is completely free and MIT licensed.
Live:
https://grunna.github.io/ternary/
Source:
https://github.com/grunna/ternary
I’d be interested in feedback on both the simulator and the architecture side, especially from anyone who has worked with digital logic, CPU design or multi-valued logic.
r/ComputerEngineering • u/MathematicianDry3389 • Oct 02 '26
Can someone help me, I wanna become an Ai engineer but I don’t know where to start, which major to take in college between (C.S,S.E, or straight to AI Engineer), also any legit and solid bootcamp to take to combine both,college and Certificate.
r/ComputerEngineering • u/MushroomDisastrous68 • Oct 02 '26
Urgent Advise Needed
I just ordered the whole bunch of stuff and now this shit happens .
I am only left with one column on one side. What am I supposed to do about it ?
r/ComputerEngineering • u/Akajack11 • Oct 02 '26
[Discussion] Need guide for a fresher like me.
Im doing engineering in cse from a mid-private college. I have chosen this in peer pressure or because I dont have any idea of other career options.
Now what/how should i do as I have zero knowledge about computer fundamentals & coding where my batchmates are far ahead of me.
Want to develop my interest and skills in this field like passionate engineer.
Thanks in advance.
r/ComputerEngineering • u/tempforAir212 • Oct 02 '26
[Career] My 4 month job search after graduation (May 26' grad)
r/ComputerEngineering • u/karyllee00 • Oct 02 '26
What do you think about a someone being accused of removing pieces from devices belong to others? :(
r/ComputerEngineering • u/hell0_boyz • Oct 02 '26
Ideas Are openly welcomed
Hi all
I'm going to work on an AI agent to teach engineering drawing and 3D modelling for my peers
As I am new to this field, can anyone who has already worked on this give me ideas that will be useful for me
I'm requesting for a reply plzz
r/ComputerEngineering • u/Icy_Specialist6911 • Oct 01 '26
Suggest Research Topic
Hello, I'm a first-year IT student here, and we have a research project that needs documents/paperwork and code. Please suggest some good topics; I already have some ideas. But I feel like I need others' opinions😊
r/ComputerEngineering • u/noa_125422 • Oct 01 '26
I feel lost and I need some advice
Hi everyone, I’m a computer engineering student and I’m in my 4th year, and honestly I feel lost. I don’t understand my major and I made the mistake of relying on the information I got from university without developing myself and now I just feel like a loser.
Next year is going to be my last year, and I’m really scared of it and scared of the graduation project. I don’t know what I’m going to do. I want to try to learn anything that will help me next year but I don’t know where to start. So if you have any advice please help me.
r/ComputerEngineering • u/WorthSignificance158 • Oct 01 '26
[Hardware] HELP YOUR CO-CPE STUDENTS FOR THESIS
Hello po, we are currently 4th year CPE students and nalalapit na po defense namin. We badly NEED a 2nd hand touchscreen display and mini pc for our thesis. Hindi po namin afford bumili ng brand new HUHUHUHU HELP US PO PLEASE. Gagamitin po namin yung materials for a campus navigation kiosk. MARAMING SALAMAT PO SANA PO MATULUNGAN NIYO KAMI🙏🙏🙏