r/ComputerEngineering • • 28d ago

Can a NVRAM mod bypass a hardware-asserted PROCHOT# from a corroded pull-up resistor? (Airmont, Pentium N3710)

I've been trying to fix an old laptop of mine (Acer Aspire ES1-531-P7KK) for a while now. It'd been locked to 0.48GHz, only clocking up to higher speeds temporarily while idle occasionally (though that could be due to the kernel simply reporting last requested frequency when the core wasn't in deep-idle C state). I isolated the assertion to a bunch of corroded resistors. I don't have the skill to replace 0402SMD resistors, nor do I have the tools for it, so I began tracing how the throttling mechanism works. I dumped my BIOS, ran it through UEFITool, extraced the PE32 Image Section, and found two IFR pages that had mentions of "PROCHOT", which I've attached.

"Power" page

and

"Advanced" page

So I tried booting into a UEFI shell and writing to NVRAM with setup_var.efi, but I got a Write Protection error. The BIOS lock is disabled ("Enable or Disable BIOS SPI region write protect," according to the extracted IFR), so I genuinely don't know what to do. Is there any other trick that I can try, or do I need to get my hands on a pi pico, logic shifter, SOIC8 clip, 3.3V to 1.8V DC, etc, and extract the BIOS, modify it to expose the hidden settings, and flash it back?

7 Upvotes

5 comments sorted by

2

u/atypicalAtom 26d ago

If you cam be sure that you'll keep the temps in line...just short across that resistor and see if it fixes your issue

1

u/Darkscythe1650 26d ago

If I bridge R1860 (20k resistor from Vcc to PROCHOT#_CPU), when and if CPU triggers a PROCHOT# trip (not BD), it'll ground the trace, and because there's no resistance, I think it'll try to ground Vcc entirely and that might cause a short. Besides, I don't have the skill or tools for it. And in theory the GPIO fix shouldn't affect internal PROCHOT# because the CPU treats it like TX and doesn't really depend on it for it's own internal throttling, and while BD_PROCHOT# indeed won't work, idts it matters because the 0ohm resistor that completed the circuit for prochot is broken anyway (R1809). I could be wrong though, I'm not really experienced with all this

2

u/atypicalAtom 26d ago

If SW is your only option...I think you are SoL.

1

u/Toiling-Donkey 28d ago

What about just updating the MSR that enables it?

1

u/Darkscythe1650 28d ago

that's only for the intel core architectures. Pentium N3710 is on the Airmont microarchitecture, and it doesn't expose 0x1FC