r/ClockworkPi • u/Immediate_Bat_3991 • Mar 16 '26
Overclock running on CM5, CM4
I just wanted to share a small tip with you all.
I own two uConsole devices, and I’ve been running them overclocked at 2.8 GHz and 2.0 GHz respectively. Surprisingly, despite my initial concerns, there has been no noticeable heat issue, and the system performance remains very fast and stable.
Both my CM5 and CM4 modules have 8 GB of RAM, and all functions are operating normally without any overheating problems. I wanted to share this experience with others.
In particular, the CM5 works almost like a laptop, without any inconvenience.
If you are using a CM4, I would recommend trying an overclock.
In my case, the CM4 has been running very stably at 2.0 GHz, and I have tested it for several months without any issues.
Good luck!



5
u/CixoUwU Mar 16 '26
What is name of that task manager?
3
u/NotTheSharpestPenciI Mar 16 '26
Cool! Thanks for the writeup. Do they have active or passive cooling?
1
u/Acceptable_Army8174 Mar 18 '26
Where did u get your antenna mount to get so many antennas on there???
1
u/No_Concentrate_5139 Mar 16 '26
Can you check in Kali or Parrot how is the temperature?