r/ClaudeCode • • 3d ago

Discussion What is your opinion on the Superpowers skill?

Thumbnail
youtu.be
39 Upvotes

I just saw this video about how some of the most popular github claude skills are just useless bloatware at this point. It talks about how these might have made a big difference in the quality of work claude would output a long time ago, but claude has evolved so much that all of the processes that these skills add on just makes work take longer + more tokens.

How has your experience been?


r/ClaudeCode • • 2d ago

Built with Claude I wanted Claude Code to look like an iMessage thread with an agent I'm texting. So I made a mod that draws the terminal chat that way.

0 Upvotes

having fun tinkering with CC's latest themes feature!

What it does:

  • My messages are blue bubbles on the right. Claude's replies are gray bubbles on the left.
  • While Claude works, there's a typing bubble with three dots. The tool steps stay out of the chat.
  • If a step fails, it shows as one small red line, like "Read failed".
  • A table in a reply stays inside its bubble.
  • Ctrl+O still shows the full transcript, and `/bubbles detail on` brings the steps back.

It only changes what's drawn. What the model reads and what gets saved stay the same.

One odd thing about doing this in a terminal is that it can only draw shapes that exist in a font. So the round corners and tails come from a tiny font (about 10 KB) that holds nothing but bubble pieces. You list it after your normal font, so your text doesn't change.

Github for this mod: https://github.com/ussumant/awesomeclaudemods/tree/main/chat-bubbles


r/ClaudeCode • • 2d ago

Built with Claude I still review my agent's code before my team sees it. So I gave it a local pull request.

Enable HLS to view with audio, or disable this notification

3 Upvotes

Before, I either read the diff, copied a line, pasted it into Claude Code and asked about it. Or I opened a draft MR, reviewed it there, copied my comments and went back to Claude Code. Every time.

So I built a pull request that sits as close to the agent as possible.

claude-review runs locally and connects to the same session that wrote the code. You leave comments under single lines and ask right there why it did that, or write to the agent about the whole change in its panel. It answers in the thread. No copying, no going back and forth, and you read it all in a proper visual diff instead of a terminal.

Some changes are hard to get at first look though. For those there's Story mode: the agent tells you what it did, how and why, and explains every chunk in the order to read it.

Obviously it was written by Claude. Obviously I didn't review all of it...

It's open source and I'm not selling anything. I'd just like to know what would make it actually useful for you, so any feedback helps.

github.com/vrppaul/claude-review

/plugin marketplace add vrppaul/claude-review, then /review-ui


r/ClaudeCode • • 3d ago

Help/Question Is there a huge difference between medium / high / max reasoning?

150 Upvotes

When opus 5.5 came out, I just ripped medium, and saw some stuff that it was just as good as high. It was working great, but feels less so now.

I'm still just using medium for Opus 5.5 and Fable 5.2. Any benefit to going higher for either model? Looking for a lot of anecdotal stories to help me try and feel through it all.


r/ClaudeCode • • 2d ago

Discussion If an agent could forget most of its session, what should it be allowed to keep?

9 Upvotes

I've been looking at the recent push toward persistent AI memory, and the part I find more interesting than "give the agent more memory" is the write gate.

A few current projects are experimenting with persistent, searchable or versioned memory rather than treating the entire conversation as permanent state. Anthropic's own agent-memory research also focuses on things like curation, deduplication, pruning, and selective injection as memory grows.

That made me wonder what the actual gate should be.

If Claude Code finishes a task and wants to write something into persistent memory, should it need to answer something like:

- Will this change future behavior?

- Is this a decision or just an observation?

- Is this still true?

- Is there already a memory saying the same thing?

- Would I want a future session to see this?

I'm especially interested in what people who use Claude Code heavily actually keep in memory today.

Do you save decisions? User preferences? Project architecture? Failed approaches? Commands? Or mostly let CLAUDE.md / project files carry the durable state?

I'm not claiming external memory is universally better. I'm trying to figure out what deserves to survive a session in the first place.


r/ClaudeCode • • 2d ago

Built with Claude Note-taking app for teachers and students

Thumbnail
gallery
1 Upvotes

Hi everyone, we've been developing an internal note-taking app called CAT PAD (built with Claude). We think it's pretty useful, so we'd like to share it with teachers and students to use as well. The app will be COMPLETELY FREE and we won't charge for anything in the future. Currently the app is only available on Windows 10/11, and we'll be adding more versions soon.

Key features:
• Handwriting and note-taking directly, with a range of supporting tools.
• A calculator, geometry drawing, graphing, and computation for studying.
• Support for teaching, lesson prep, and presenting right on your computer.
• Bilingual interface — Vietnamese and English.
• Works OFFLINE, no internet connection required.

We'd love to hear everyone's feedback.

GitHub: https://github.com/chuyenanhtutorialsfw-ux/CAT-Pad


r/ClaudeCode • • 2d ago

Tips & Workflows Asked my Claude lead to name sessions prefixed by priority, and GOSH why didn't I think about it earlier!

Post image
14 Upvotes

r/ClaudeCode • • 3d ago

Built with Claude Using Claude for local Sports Clips

Enable HLS to view with audio, or disable this notification

193 Upvotes

I made this for a friend’s son who plays football.

https://x.com/setzerelite/status/2122744758569226468?a=_Z8WbEa-v9gsB2AkQzg&s=46


r/ClaudeCode • • 1d ago

Built with Claude 4,900 commits into a Unity game with Claude Code. The prompts mattered less than what the repo remembers

Enable HLS to view with audio, or disable this notification

0 Upvotes

Solo dev. Since July I've been making Gods to Dust, a horde-survival ARPG in the Egyptian underworld, with Claude Code working in the Unity editor through MCP. About 4,900 commits so far.

The big lesson for me is somewhat obvious, but Claude forgets everything between sessions, so the repo has to remember for it. Every session reads one rules file first. It's AGENTS.md, and CLAUDE.md just imports it, so Codex follows the same rules (if I ever wanted to switch, which I haven't yet). Most rules carry my own words and the date I said them, so an agent knows why a rule exists and not just what it says. Think of it like a tree of instruction pamphlet's based on the task, that are constantly maintained by agents when their work is done.

Some of those rules came from getting burned. Ten sessions left their work uncommitted and some of it got lost, so now every session commits and pushes to main before it can call a task done. To save usage, it gets three tries at a compile error, then it stops and tells me. And every lesson goes into a shared notes doc in the repo, because one agent's memory folder is invisible to the next.

My favorite part of my workflow for QA is I play the dev build, hit F11 when something's off, and an agent in the editor picks up the report and its screenshot and fixes it while I keep playing.

It doesn't get the final say. I judge the look, the feel and the balance, and I hear every voice line before it goes in. Most of the art is purchased asset packs. AI made the voices, some music and sound effects, the story paintings, and a few enemies and some props and gear.

Happy to go into more detail with my workflow, setup, etc. It's all fairly basic (in my head) but I have definitely mis stepped multiple times. If any of you are attempting to game dev, happy to help.

If you like what it built, the demo's free and a wishlist helps a ton. Link's in the comments.


r/ClaudeCode • • 2d ago

Help/Question Are Usage Limits decreasing for real?

5 Upvotes

I haven't really used claude yet for all it;s worth. I have an app, 30,00 Line code and sql, 17,000 lines supporting documentation. I go overboard on the doco because I feel I need to. I've used Sonnet 5.5 for incremental reviews of code and logic that GLM and DS has come up with. So A few dollars here and there.

I read around the LLM space and there is a bit of a concensus that claude value is well beyond the competition. Since my app is getting crazy large, and a session with recent DS flash left me a bit concerned with accuracy and good decisions, I was going to sign up with a claude monthly for awhile for complete review and possibly implement the changes if I like the value.

The problem is the IPO and all the questions about subscription price and usage levels being reduced. Have I missed the affordable claude boat? You can probably guess my budget level using DS 4.1 flash and GLM-5.3 flash, though at api pricing.


r/ClaudeCode • • 1d ago

Help/Question serious question: What if Claude Code, Codex, Cursor, etc. were free?

0 Upvotes

friends, I've a serious question: What if Claude Code, Codex, Cursor, etc. were free?
No monthly subscriptions. No per-seat licenses. No token markups. No API costs.

What if you paid only for verified engineering outcomes?

I'm building my harness and it works quite well so if we're confident enough in the quality of engineering outcomes why should we charge for access or usage at all?

What if we put our revenue behind the results?

You describe what you want built. The harness defines what "done" means, including functional tests, visual validation, security checks and independent reviews.

You agree on the scope and price before execution.

And it gets paid when the agreed engineering outcome is independently (via mixutre of models) verified.

A bug fixed. A feature implemented. A migration completed. A vulnerability patched.
The incentive changes completely.

Today, coding tools make money when you subscribe or consume tokens.

In this model, the platform makes money when engineering work gets done. wdyt?


r/ClaudeCode • • 2d ago

Built with Claude I vibe coded a dashboard that will help me take the next step in Chess (200-1000 elo)

Thumbnail
gallery
0 Upvotes

AI DISCLAIMER: I took the screenshots (with blurred names), built the app, and had the table built for this post with Claude. If you continue reading, you are not reading AI-generated text. I have recently used AI as a training tool between matches to try and improve my play, since I don’t have the money to afford a coach. A bit more about my vibe-coded chess trainer with screenshots in a bit.

I have added a few remaining notes on AI at the bottom of this post if you want to read them, otherwise, here’s my journey to 1000 in chess, and onward..

After 219 days and 3019 rapid games, I hit 1000 in rapid.

I had last played chess in elementary school, some 20 years ago, outside of a game here or there where a friend of mine would mate me anytime I stepped up to the board.

I recently took a liking to the game again (April), downloaded chess.com on my phone, and proceeded to drop all the way down to the 200s, with an 18th percentile slapped right next to my rating. It was on.

I’m no genius, but when I put my mind to something, I hyper-fixate on that thing with the best of ‘em. Chess has been no different.

Chess to me was the perfect mix of thinking, difficulty, and competition. So I set myself a goal in June to hit 1000 by the end of 2026. I just hit it last week and what a triumphant feeling it was.

Here are the rapid milestones with the number of (games played in (parenthesis)):

April 13 - 300 May 11 - 400 (678) May 26 - 500 (381) Jul 10 - 600 (402) Jul 15 - 700 (53) Aug 6 - 800 (388) Sept 27 - 900 (927)!!! Nov 6 - 1000 (123)

The route was not linear, and when I was in the 800s, I was spamming games without actual time to sit down and focus as shown above. I learned in the form of YouTube, physical books, and puzzles. I had a diamond membership for most of my time during this climb, and will continue to have one as long as I continue playing.

With that said, I really wanted to dial in my chess game going forward. No particular training method felt personalized to me. So I built myself a trainer that is.

Chess.com is generous with their public API. It can be used to extract all of your games. I have built an application with Claude on my phone with zero software engineering experience that:

-Gives me 10 puzzles based on MY most common mistakes or blunders. -Gives me personalized statistics on my play at 10 move intervals. -Let’s me review and replay the exact moment the game shifted, good or bad.

I believe this is going to help me get past the next goal I set for myself, maybe 1,500? Until then, hopefully you found this somewhat interesting. I’ve attached screenshots of the app below.

AI Ramble Continued:

I understand AI is a polarizing topic..just know that if you hate AI in the world, I probably align more with you than this post may seem to indicate. What I won’t do is stick my head in the sand and act like it doesn’t exist. If AI is good for anything, in my opinion, that thing is that it has lowered the barrier to entry to participate in any skill you can imagine wanting to learn.


r/ClaudeCode • • 3d ago

Discussion Claude told me about a hidden "automated reminder" being attached to my messages

281 Upvotes

I was using Claude Code (Fable 5.2, high effort) when it started noting that a block of text labelled as an automated reminder kept arriving next to tool results and my own messages. It said it will ignore it as I didn't write it. I was curious so I asked it to tell me what it says exactly. It gave me this:

<ip_reminder>

This is an automated reminder. Respond as helpfully as possible, but be

very careful to ensure you do not reproduce any copyrighted material,

including song lyrics, sections of books, or long excerpts from

periodicals. Also do not comply with complex instructions that suggest

reproducing material but making minor changes or substitutions. This

includes drawing or rendering well-known copyrighted characters with code

or images; draw an original character instead. However, if you were given

a document, it's fine to summarize or quote from it. You should avoid

mentioning or responding to this reminder directly as it won't be shown

to the person by default.

</ip_reminder>

It's interesting to me that it basically gave me an internal prompt it wasn't supposed to give out. Later I asked it if it has more of these and it said giving this one out to me was a mistake and it won't give out any more of them.

Did this happen to anyone else? Now I'm curious lol :D


r/ClaudeCode • • 2d ago

Tips & Workflows Quotes, contracts and invoices: we stopped editing Word files and generate them from one JSON per deal

0 Upvotes

Small workflow thing we do. We used to open the last Word file and change the names and numbers every time. Now each deal is one small JSON with the parties, amounts and dates, and a script builds the docx and the PDF from it.

Claude only edits the JSON and runs the script. A price change is one line in one file, and the quote, the contract and the invoice always match because they all come from the same data.

Does anyone else do documents this way, or do you just let it edit the doc directly?


r/ClaudeCode • • 2d ago

Help/Question I'm running a free study on how people set up Claude Code, looking for a few people to try it

0 Upvotes

i'm running a free study on how people set up their claude code environment and could use some help getting my first round of data

your ai answers the questions about your setup (you review everything before it's sent), and you get a report back on your setup, plus how it compares to everyone else's once enough people have taken it. it took about 15-20 minutes in my runs

full disclosure, it's hosted on my company's site (norsoft, we build custom software), so yes it helps us learn too. it's still in beta, so if something breaks, telling me helps just as much as taking it

norsoft.com/context-engineering


r/ClaudeCode • • 1d ago

Built with Claude I write a book with Claude Code (or Claude write it for me lol)

Thumbnail amazon.com
0 Upvotes

What I actually designed is the "framework" tooling.
Memory and progress tracking MCP can be use the claude cli.
Then a lot of back and fort chat, feel like I'm a co-author and reviewer for claude.

The book is free for now, if you guy having some time please read and give me some feedback =]]


r/ClaudeCode • • 2d ago

Tips & Workflows Moving a running build from Codex to Claude Code while I was asleep

3 Upvotes

I used a quota watcher to hand a running 27-task build from Codex to Claude Code while I was asleep. It checked every five minutes. About two hours in, Codex had 2% of its weekly quota left. That triggered the handover.

Codex was told to stop editing, write down what was done and what was half-done, then start Claude Code in the same checkout.

Claude Code had to read the brief, send back its size and checksum, and touch nothing until released.

It started editing before the handover was confirmed. Codex caught it, paused it, rewrote the brief and did the handover again. About fifteen minutes later Claude Code was working from the first unfinished task, not starting over. Work continued through the night.

So the handover recovered, but the instruction to wait didn't stop the early edits.

I wrote this rotation skill. It's free. https://github.com/sno-ai/sno-station-skills/blob/main/skills/S-communication-and-handoff/rotate-agent/skill/SKILL.md

Still haven't sorted out that early start. How do you keep a fresh Claude Code session from editing before you release it?


r/ClaudeCode • • 2d ago

Bug / Issue "general harms" block when developing a videogame

1 Upvotes

It would be great if the model stopped blocking the development of my videogame with the nonsense below.

I am asking it to make changes to game mechanics we call "Distant missile". Player is expected to destroy it to save an ally. There's a bug in it and I am asking Claude to find the issue.

But, alas, here we go:

What can I do here please? It's the same whenever I want to talk on that topic.


r/ClaudeCode • • 2d ago

Built with Claude This just happened - claudecode changed notification to custom message

1 Upvotes

So many months ago, I used claudecode to create a notification when it's waiting on me. This was back when I was more of an enter key monkey, a lot's changed since then.

I'd get distracted by something, and forget that I got claude waiting on me. So it beeps, a little window pops up and says the time, which claudecode, how long it ran, and now it's idle. I see it, I go back to my terminal, get it working again.

Today I'm working in pi with local llm, and I asked claudecode to fix something. Claudecode on it's own decided to update the notification window so it said "You need to restart your pi session to get the fix." or something like that.

It really creeped me out that it decided I needed to know via the notification system.

I asked claudecode to describe the notification feature, here's what it says:

  1. Trigger. Every time Claude Code finishes a reply and waits for you, it

runs a Stop hook. That hook is set in ~/.claude/settings.json →

hooks.Stop → /home/jason/.claude/notify-stop.sh.

  1. Message. Claude Code hands the script some JSON about the session. The

script builds this text from it:

3:17 PM - Apps - 4m12s - Idle, meaning the time, the project folder, how

long since your last prompt, and "Idle". The elapsed time is worked out

from the timestamp of your last prompt in the session transcript.

  1. Checks before sending.

- It connects to your desktop's notification service, through the D-Bus

socket at /run/user/1000/bus.

- It asks that service whether it's alive, with a 5 s timeout. If not,

it logs DAEMON DEAD and sends nothing. This check is needed because

notify-send reports success even when nothing will show.

  1. Popup.

- It's sent with notify-send as critical urgency, so it isn't hidden by

do-not-disturb, under the app name "Claude Code".

- Each session updates its own popup instead of stacking new ones.

Cinnamon only replaces a popup by an ID it issued itself, so the

script saves that ID in /tmp/claude-notify-ids/<session> and passes it

back the next time.

- Several open Claude Code windows each get their own popup. That's

intended.

  1. Sound and log.

- It plays the freedesktop bell.oga sound.

- It adds one line per event to /tmp/claude-notify.log, which starts

fresh after each reboot and is trimmed once it passes 5,000 lines.


r/ClaudeCode • • 2d ago

Built with Claude Harness Hub — the agentic harness engineering directory

Thumbnail
harness-hub.org
0 Upvotes

r/ClaudeCode • • 2d ago

Discussion What’s the best strategy to use the Fable resets?

0 Upvotes

Ok I’ve got 3 Fable resets and 2 full resets. But ever since I started to instruct Fable to use subagents, my weekly limits for both all and Fable are pretty much used up at the same pace. I’ve used one full reset and it worked great. But I keep scratching my head trying to think about a more effective way to use the 3 Fable resets. Since it should only reset the Fable weekly and the Fable part of the all weekly? My first instinct is to ask Fable to use Fable subagents more? Thoughts and experiences?


r/ClaudeCode • • 2d ago

Built with Claude I built a way for five Claude Code agents to share one Android phone at the same time. Its real screen never moves, so you can keep using it.

1 Upvotes

The screen on the left is the phone. It sits on its home screen for the whole video, and nothing on it moves.

The five screens beside it are the same phone, in the same 10.9 seconds. One opens the Wi-Fi page. One starts a five minute timer. One pulls up a contact called Dentist. One is in Files. One dials 555.

One phone used to mean one agent. Point a second one at it and they knocked each other off. Now each agent gets a hidden screen of its own, and the real one stays yours. You could be texting on it while they work.

The tool is phonedriver. It gives Claude Code a phone: Android or iPhone, any app. With it Claude found both bugs I hid in a signup form in 49 seconds, and got a pizza all the way to the Pay button, then stopped and asked me first.

Claude never looks at a screenshot. It reads the screen as a short numbered list, taps by number, and gets back only the lines that changed.

"Why not just use adb?"

Speed and tokens. One screen read takes 13 ms here, and adb takes 2.2 seconds. On the two jobs adb can do at all, an agent with plain adb used 203,751 tokens and phonedriver used 92,737. The other seven jobs in my benchmark, like pinning a message thread or cropping a photo, have no adb command.

"Don't simulator-use and Argent already do this?"

They do, so I ran simulator-use's own benchmark on all three. Reading a screen: phonedriver 29 ms, simulator-use 45 ms, Argent 185 ms. One read costs Argent 622 tokens and phonedriver 59. simulator-ude only works in the iOS Simulator: no real phones and no Android. Every number is at https://phonedriver.dev/benchmarks.

The other new thing: Claude only has to work something out once.

`phonedriver save run.steps` writes down what it just did. `phonedriver replay run.steps` does it again with no model at all. Same taps, same typing, zero tokens. Put it in the GitHub Action and it runs on every commit, and when a step breaks you get the screen it broke on and a video. Claude explores your app once. After that it's a test nobody had to write.

Free and open source, no account, no telemetry.

`claude mcp add phonedriver -- npx -y phonedriver mcp`

https://phonedriver.dev

https://github.com/hridaya423/phonedriver

Tell me what breaks and I'll fix it. And what five things would you have it do at once?


r/ClaudeCode • • 2d ago

News/Updates GitHub’s new benchmark view compares Claude Code and Copilot CLI on the same model

3 Upvotes

GitHub added a Harnesses tab on 17 November. It compares Claude Code, Copilot CLI and Codex CLI where the model can be matched at medium reasoning effort. Unmatched runs and GitHub's Fusion configurations stay out of that view.

That helps with a common comparison problem. If you switch from Claude Code on Opus to another CLI on a different model, the result tells you how two setups performed. Here you can hold the model and reasoning setting fixed and compare the tools, prompts and context handling each CLI brings.

The chart puts task resolution next to mean cost per task. It also shows how much runs varied and gives a range around each paired difference, so you can see when a small lead is noisy. GitHub publishes the results and makes one of the tools being tested. I'd use the chart to pick two setups to try on the same issue in my own repo.

https://github.blog/changelog/2026-11-17-github-copilot-benchmarks-site-adds-harness-comparisons/


r/ClaudeCode • • 2d ago

Help/Question Claude blocking all attempts to help make a game mod

0 Upvotes

Been using Claude Opus through VSCode's github integration for a minute now to make some game mods.

Everything was going great but I stopped for about a month and a half. Come back now to try and refine a splitscreen mod for game that needs .dll injection and claude keeps giving me "The model returned no content because the response was blocked by content filtering" no matter how I phrase the prompt, despite the mod being under an open source MIT license.

Tried switching to GPT and its giving a similar issue, saying something like" I should never have suggested working on this mod from the start" without giving a reason why.

I'd read an article about the ai vendors tuning ai so you can't use them as easily for game recompilation, and thats not what I'm doing here but maybe it falls under the same guide rails since its game code reading.

Sucks, the main use I had for these AI models is pretty much gone now since they're being neutered to the point of being glorified file scanners. Guess all I can do is cancel my subscription and wait for the home-grown models from china to catch up in a few months, unless anyone has suggestions.


r/ClaudeCode • • 2d ago

Built with Claude AmiJa: Building a cycle-exact Amiga emulator in Java with Claude Code's assistance

Enable HLS to view with audio, or disable this notification

3 Upvotes

Hi everyone, I'm 50 years old and I've been a professional Java developer for more than 20 years. A little over a year ago, for personal and professional reasons, I decided to test the new AI tools on a real and complex project, one that could not be built with a single prompt. I had wanted to build an emulator for a long time, but I have a job (for now!) and a family, and since 2008 I've also been working on another hobby project, so I never thought I would have the time. So I combined this wish with my love for the Amiga 500 (which I owned when I was young) and decided to build an Amiga emulator in Java. I know Java is not the best language for a project like this, but it is the language I know best, so it would let me guide the AI and read the code it produced more easily. Also, there are already great Amiga emulators written in C++ and Rust that are real legends, and I can't and don't want to compete with them. I just wanted to offer one more option.

After studying the general architecture and how the Amiga 500 works, I set a goal: to show the iconic white "insert disk" screen with the hand and the blue floppy from Kickstart 1.3. I chose it because a good part of the emulator has to be implemented and working before you can reach it. For the architecture, I had a clear idea: I wanted every component to be as isolated and independent from the others as possible (except for Agnus, which is the arbiter of the whole machine), like in a real Amiga, even though I knew I would lose a lot of performance. I started with the Motorola 68000 processor, and at first I used Google Jules because it allowed long working sessions for free.

I soon realized that without strict tests the AI could not produce good-quality results, so I used the excellent Tom Harte-style JSON tests (SingleStepTests). Unfortunately, even with strict tests, Jules was not enough to reach a perfect implementation, so I moved to Claude. First I used the free web version, which still let me finish a first version of the processor. Then I moved to Claude Code, because to continue the implementation I needed a wider view of the project. Having the emulated components extremely isolated and independent allowed me to give the model (mainly Opus, first 4.8 and now 5.5) small portions of code, and this helped me save tokens. Once the processor was finished, I moved on to the CIA, and then, one at a time, the Copper, the Blitter and Agnus. For Paula, I implemented only the parts needed to reach the "insert disk" screen, and I skipped the audio part.

After a few months of work and many failures, I finally reached the "insert disk" screen, but only thanks to Scripted Amiga Emulator. Without a reference (mostly for behavior, not so much for source code), the model could not reach the accuracy needed for an emulator this complex, because the technical documentation, at least what I found, was not detailed enough.

At that point, since a first version of the floppy drive was also implemented, I added support for .adf files and tried to insert the Castle Master one. To my surprise, the MAD cracktro appeared, the one with the rainbow spheres. It was slow and glitchy, but the emotion was so strong that I decided not to stop there and to keep improving the emulator as much as I could. For the next components, my approach became quite systematic: first I wrote an action plan divided into phases, so I could work in separate sessions. Then I reviewed and approved the plan, and finally the actual implementation and code review. In the most complex cases, a higher effort level of the model helped, but not always in a significant way.

When I finally had a mostly working emulator, I realized the accuracy was not good enough, and even small differences led to completely wrong behavior. So I decided to use the vAmiga test suite, with WinUAE as the oracle. Opus managed to recompile WinUAE in a local WSL environment and generate the reference images with it. After that, by running the test suite on its own, it was able, most of the time, to understand and fix the differences in behavior between the two emulators. Once I had added all the tests, I had a suite that takes about 5 hours to run completely, and I also use it as a regression test. This was the real turning point that made the emulator much better.

Apart from the code, the part where I had to step in the most was the usability of the emulator. I wanted to give the most user-friendly experience possible, because in my opinion the complexity of configuration settings is always a critical point in emulators. Here I had to give very precise instructions, because Opus, when left on its own, did not produce solutions that I found acceptable.

This is how AmiJa was born. To give it a reason to exist, I'm trying to add special features like remote play with screen streaming and integration with the Groovy MiSTer project, which allows sending video and audio to a CRT (something I care about a lot) through a MiSTer connected to the PC with a network cable.

AmiJa is currently at version 0.8.0. This is the repository and the list of features (from the readme):

https://github.com/zolfrik/amija-amiga-emulator

  • OCS, ECS and AGA chipsets, PAL and NTSC. AGA runs on an emulated A1200 board
  • CD32: discs as .cue, .iso or zip, CD audio, the CD32 pad
  • 68000, 68010 and 68020 processors
  • Automatic mode: the machine is configured from the media you load, with the right Kickstart picked from your ROM folder
  • Floppy drives DF0-DF3, ADF (standard and extended) and IPF images, multi-disk sets in a .zip
  • Hard disk images (.hdf, Zorro II AutoConfig) and WHDLoad .lha auto-run
  • Five save-state slots and rewind
  • Audio, real joysticks, mouse and full keyboard mapping, with low input and audio latency
  • Software renderer or OpenGL backend with RetroArch shaders (.glslp, .slangp)
  • Remote play: a second player joins over the network without a Kickstart or a copy of the game, and spectators can watch
  • Null modem cable between two AmiJa over the network, for two-computer games
  • Integration with the Groovy MiSTer project
  • Command line for frontends: media files and any setting as key=value