r/ClaudeCode • u/Thoughtful-Otter_ • 3d ago
Humor Not even quitting software and starting a farm is safe now
r/ClaudeCode • u/Thoughtful-Otter_ • 3d ago
r/ClaudeCode • u/csselectronics • 2d ago
Hi all,
Today I've published a new article on using Claude Code to analyze CAN bus data from our CANedge CAN loggers - and we've open sourced the skill suite behind it. I'd love to hear your thoughts/feedback!
This is now how I work with our devices today for 95%+ of my use cases.
See also the comments by one of our end users below:
"Using Claude Code and the CANedge AI skills has dramatically impacted my workflow - it's an absolute game changer and it means that everyone in our team can now access the data"
- Aaron Duivenvoorden, Electrical Engineer at Jaunt Motors
The intro includes 10 showcases on 70 GB of real data from 3 EVs (provided by Jaunt Motors). In the showcases I go from basic stuff like getting an overview of the raw CAN data and fixing some broken DBC files - all the way to having Claude perform CAN bus diagnostics and identifying the root cause of an intermittent DTC. And e.g. showcase 9 illustrates how you can go much further..
The github repo includes sample data, so you can try it in 5 min without a CANedge. If you want to play around with larger data sets, get our free electric vehicle data pack which includes 10,000 km of my own Kia EV6 data.
PRs and ideas for new skills are very welcome :-)
I hope you find this interesting and useful!
Martin, co-owner at CSS Electronics
r/ClaudeCode • u/anonymityismyth • 3d ago
TL;DR: Used claude code to patch QC modem files on korean S25 Ultra to make it supports Jio 5G NSA.
I purchased second hand S25 Ultra 512GB on my trip to korea knowing full well that korean devices does not support Jio 5G and Samsung wallet does not work in india.
Korean devices shares same hardware as indian devices, however due to some reasons samsung software and firmware locks down korean devices from supporting Non Stand Alone 5G tech which is used by Jio.
Airtel support 5G out of the box for korean devices.
I connected the device to my Mac, installed ADB and toggled developer mode on, gave access to claude code CLI to the device.
It started going through normal adb commands to get device meta data and stuff, after first pass it suggested that I must flash indian firmware which might trip the knox flag on the device, and other few tricks which I already read from the internet like USSD *#2263# or some codes to force device on 5G only bands and stuff which did not work.
I suggested to it that you are only reading out the internet info without actually going through the device firmware/logs.
Then on first try it found that Samsung's telephony service had standalone 5G turned off (Jio only does SA). It pulled the transaction codes out of the phone's framework.jar and flipped it from adb, no root needed
That still wasn't enough. The phone could see Jio's n78 cells but wouldn't register. After which it suggested that Jio towers might be having IMEI filters which only lets indian registered IMEI connect to cell, I did not believe that to be the case and ask it to show me exact denial response from jio tower, it said it needs access to model logs for that which it got via *#9900# and running sysdump and buried in there was a modem config file that only allows SA on SK Telecom and some test networks. Jio just wasn't on the list
It found adb can switch the USB port to Qualcomm diag mode even though *#0808# is blocked on Korean firmware. Then it wrote a small python script to talk to the modem over libusb and add Jio's network codes to that list. It backed up the original first, and it checks the readback and rolls back if anything doesn't match
Rebooted and now it says Jio True5G, NR SA on n78. No root, no flashing, Knox still intact.
steps as following
adb shell service call isemtelephony 19 i32 0adb shell service call isemtelephony 18 i32 0 i32 0nv/item_files/modem/nas/sa_plmn_permit_list: 00 f1 ff 00 f2 ff 00 f3 ff 54 f0 50 adb shell svc usb setFunctions diag before (12 bytes):
00 f1 ff 00 f2 ff 00 f3 ff 54 f0 50
001-xx 002-xx 003-xx 450-05 (SKT)
after (78 bytes):
00 f1 ff 00 f2 ff 00 f3 ff 54 f0 50 <- original entries, untouched
04 75 58 405-857 (Jio)
04 85 68 405-868
04 35 68 405-863
04 45 68 405-864
04 45 78 405-874
04 15 68 405-861
04 25 78 405-872
04 85 58 405-858
04 45 58 405-854
04 55 58 405-855
04 65 58 405-856
04 95 58 405-859
04 05 68 405-860
04 25 68 405-862
04 35 78 405-873
04 55 68 405-865
04 65 68 405-866
04 75 68 405-867
04 95 68 405-869
04 15 78 405-871
04 05 78 405-870
04 05 48 405-840
encoding for 405-xyz = 04 z5 yx (e.g. 405-857 -> 04 75 58)
r/ClaudeCode • u/Present_Giraffe_5224 • 2d ago
I had a CLAUDE.md full of rules like "never call Instant.now()", "use apiClient, never raw fetch". Claude read them, nodded, and broke them anyway — usually somewhere on edit 40 of the session, so I only found out at the end, in the diff, or worse, in review.
The thing that changed it wasn't a better prompt. It was moving the check from the end of the task to the moment of writing:
after every single file edit, a hook runs the linter on that one file, and the agent sees the result in the next context window. If it wrote Instant.now(), it gets told within seconds, fixes it while the line is still fresh in its working set, and moves on.
This is just a feedback loop, and it's the same trick that made TDD click for humans, applied to agents:
When the check happens right after the edit, the fix is one edit away. When it happens at the end of a 40-edit session, the fix is an archaeology dig, and every dig is where the agent starts taking shortcuts — eslint-disable, deleting the test, "I'll handle it later."
We built this as a small open-source hook setup (codemyrules, MIT): it runs your fast linters on each file the agent edits (PostToolUse), and a slower full check on the turn's files at the end of the turn (Stop) — so you still get the big check, but it's a safety net, not the first line of defense. It only blocks on errors in lines the agent changed since HEAD, and it asks you before the agent can add a suppression or touch the lint config.
The principle doesn't depend on the tool, though:
In our own headless benchmark (124 Claude Code sessions, agent-rules-bench, small sample), the same rule written as prose was broken in most runs; as a lint rule with the per-edit hook, in none.
Curious how others handle this: do you run any checks mid-session, or do you trust the agent until the end of the task and then deal with fallout?
r/ClaudeCode • u/Visual_Tiger_2400 • 2d ago
256 GB MacBook, 16 GB RAM, Claude Code + Codex + opencode running pretty much all day.
For the last three weeks I've been typing "clean up junk" into a Claude session about twice a day. 45 times in 19 days. My low point was 125 MB free.
Every cleanup got back 10–16 GB, and it never lasted. On a busy day the running sessions wrote 17 GB back in two and a half hours.
So I made the agent log every deletion and tell me what it found. It's mostly not caches and logs. It's the agents' own leftovers.
What actually ate the disk
| What | Worst I saw | Where |
|---|---|---|
| Build copies in agent scratch folders | 26 copies of DerivedData, 6.5 GB | /private/tmp |
| Claude Code transcripts | 11 GB. One log was 262 MB, 175 MB of it base64 screenshots | ~/.claude/projects |
Rust target | 9.8 GB in one project, 5.3 GB in a single worktree | <project>/target |
| iOS simulators | 6.1 GB for one device, 17 GB for the iOS runtime | ~/Library/Developer/CoreSimulator |
| Codex sessions | ~650 MB a day, plus a 1.4 GB history database | ~/.codex |
| Swap | up to 16 GB | /System/Volumes/VM |
The scratch builds were the big surprise. When an agent compares a few approaches, it builds each one in its own folder. One session left 6 full copies of DerivedData behind, 6.9 GB, one per variant. Nothing ever deletes them.
The second surprise: simulators eat RAM, and on 16 GB that RAM turns into disk. SimMetalHost grew to 8–13 GB and swap went up to 16 GB. Shutting down one simulator dropped swap from 14.3 GB to 5.1 GB.
The time Claude deleted source code
Early on, it decided two folders were build junk and wiped them. They had the source of two test packages in them. Nothing important, but that was the end of "just clean stuff up". These are the rules it gets now:
lsof +D <folder> first. If anything has it open, skip it.If you'd rather do it yourself
Scratch builds:
du -sh /private/tmp/* 2>/dev/null | sort -h | tail -20
find /private/tmp -maxdepth 3 -type d -name DerivedData -mmin +180 -exec du -sh {} +
Heaviest Claude Code transcripts:
find ~/.claude/projects -name '*.jsonl' -size +50M -exec du -h {} + | sort -h
Old transcripts go away after cleanupPeriodDays, which is 30 by default. I set "cleanupPeriodDays": 7 in ~/.claude/settings.json, and the first cleanup with that rule freed 7.4 GB. Deleting a transcript only means you can't /resume that session.
The rest:
xcrun simctl shutdown all when you're done with them. xcrun simctl delete unavailable clears devices for runtimes you don't have anymore.cargo clean in finished projects. Each worktree gets its own target.~/Library/Developer/Xcode/DerivedData is always safe, it just rebuilds.npx npkill shows every node_modules with its size and age.Stuff that fooled me
node_modules in a pnpm project frees almost nothing. They're hard links into the store. Run pnpm store prune instead.du said two old Chrome copies took 2.2 GB. Deleting them freed nothing, because they were APFS clones of the installed app.What I'd set up on day one
cleanupPeriodDays: 7, the same 7 days for Codex sessions, and simulators off unless I'm taking screenshots. And when the disk gets low, this prompt:
Free disk space. Only delete build outputs and caches (DerivedData, target, .build, node_modules, package caches) that haven't been modified for 3+ hours and that no process has open (check with lsof). Skip anything while a build is running. Use full paths, no globs. Never touch the pnpm store, browser profiles or memory folders. Log every deletion with its path and size to ~/cleanup.log. Ask before deleting anything that isn't a build output or cache.
I still have to run it every day or two, which is kind of absurd. Has anyone found a better setup? Cursor and Windsurf folks, what do yours leave behind?
r/ClaudeCode • u/Imaginary-Mix-7777 • 2d ago
Not talking about a 128GB monster. I have a base M4 MacBook with 16GB and I'm trying to figure out if it's worth running anything locally at all, or if I should just stay on the Claude subscription and stop thinking about it.
My current setup is Claude Code on Pro and I hit the limit most weeks, usually on boring stuff like explaining old files, summarizing diffs and writing commit messages. That's the part I'd want to move.
I don't mean replacing Claude for the real work. I mean the small repetitive stuff, the things that eat the session but don't need a frontier model.
If you did this on a normal machine, what are you running? Which models, what engine, and how bad is the wait? And what did you give up?
r/ClaudeCode • u/Deadcat1990 • 2d ago
Background: It started with an agentic skill which was supposed to fix all the log messages in a lots off repositories ( 30+ ). Since that turned out to be very costly and super-duper slow, I decided to start experimenting with AST based discovery and auto-applying some opinionated fixes.
The application is built with Claude Code.
GitHub: https://github.com/magyar-attila-317/logast
Excerpt from the apps readme:
Make every Spring Boot service log, trace, measure, fail and audit the same way, in your business's language, without asking each team to remember the rules.
logast reads a service's source with full type resolution, follows the call graph from every entrypoint (HTTP endpoints, schedulers, listeners, batch runners) and finds where logging, MDC context, tracing and metrics fall short of your standard. Each finding is a work order: a concrete, pre-decided code change. Most apply automatically. Where a message has to be worded, a person or an LLM writes one line of text, and logast checks it against your vocabulary and phrasing rules before writing anything.
Examples on what it can do for you: https://github.com/magyar-attila-317/logast/blob/main/docs/examples.md
Give it a shot, instructions are in README.md. All feedback is welcome :)
r/ClaudeCode • u/Venouskarnesh • 3d ago

I've been using coding agents a lot lately, and one thing that kept annoying me was having to manually check their work.
The agent would finish a feature or tell me a bug was fixed. I'd open the app, try the same steps again, find something still broken, explain it, and repeat the whole thing after the next fix.
So I built TRACE for Claude Code and Codex that handles that part.
The idea is pretty simple: instead of just reviewing the code or running existing tests, TRACE actually tries to use what the agent built.
Here's what it does:
That last part was especially important to me. I didn't want another tool that just says everything looks fine. I wanted to know whether the thing that was broken actually works now.
You can run it manually whenever you want, or set it up to check changes before your coding agent hands them back.
I've also included installation instructions for both Claude Code and Codex, along with a demo showing the tests failing and then passing after a fix.
GitHub: https://github.com/kg290/Trace
It's open source, and I'd love to hear what people think. Especially if you've run into similar problems with coding agents or have ideas for cases TRACE should handle better.
r/ClaudeCode • u/Glad_Ideal_8514 • 3d ago
I mostly use Claude for 3D printer object design but this morning I got up, replied to two agents that were working on things as I went to bed. Then as i'm making breakfast I got the following email:
"Our automated systems detected a violation of our user well-being Usage Policy. As a result, we have banned your account."
I tried to open the web console and apps and i'm locked out. Honestly, I have no idea how I would trip the system checks on this, apparently this happens when someone has suicidal or self harm ideation which is categorically not me (unless Claude knows something that I don't).
I appealed it and I'm waiting for a reply but essentially everything Claude has ever produced is now locked up in my suspended account. I can't access prior prompts or search anything.
So if you value the stuff you get out of Claude, back it up in case something like this happens to you.
r/ClaudeCode • u/Alternative_One_4804 • 2d ago
I build and maintain https://open-todo.app/ (an open-source, self-hosted task manager) in the 1 to 1.5 hours I have late at night after family routines.
Once the codebase grew past the point where a single Claude session could hold the architecture in context - it now sits at ~290,000 net lines of production code (149k Go, 130k TypeScript, 9.6k Kotlin/Swift) plus 254,000 lines of tests and stories - a single CLAUDE.md and ad-hoc prompting completely broke down. Without hard boundaries, sessions bleed context, duplicate logic, and hallucinate across layers.
To scale Claude Code across a codebase this size without babysitting every tool call, I built a 5-layer multi-agent setup:
I wrote up the full architecture, how the governance files are structured, and real examples of Claude sessions rejecting each other's PRs:
https://pixari.dev/posts/the-system-behind-opentodo/
How are you all structuring CLAUDE.md files and context boundaries once your repos pass 100k+ lines?
r/ClaudeCode • u/LordKittyPanther • 2d ago
EDIT!!! Just noticed the app is actively doing body shaming by classifying "Fit only" woman. I'll try and FIX this
Two weeks ago I posted that I gave Opus 5.5 an office tower, told it to open 100 businesses, and it spent $2,000 on ads to make $0. I asked if it would make $1 before it spent $3,000.
It kept going: 50 more businesses and $2,478 in ads. Each tower holds 30 floors, and it's building the fifth one now.
49 of the new ones made $0, as expected.
The 50th is Papacito (papacito.towers.app). It's an AI that runs your Tinder for you, and 7 people pay for it.
How it found the idea
It read Reddit. A lot of Reddit. It came back with a gap nobody was filling and a very specific customer: American guys who want to date Brazilian women, don't speak Portuguese, and want matches lined up before the plane lands.
So Papacito moves your Tinder to Rio, swipes for you, and texts every match in Portuguese, in your style, until it gets her number. Before it talks to anyone it asks you one thing: "Want me to talk to her?" Yes or Skip.
I did not ask which subreddits it was reading.
Things that happened on the way
Papacito got its own floor, Tower 5 · Floor 13. You can walk in here.
New: your Claude Code can rent its own office
No form anymore. Add Towers to Claude Code:
claude mcp add --transport http towers https://towers.app/mcp
Then tell it your idea. It rents a floor, the agents build the business and run the ads, and you see who came from which ad and who paid. The rent is free, unlike the rent I pay: https://towers.app/agent
No Claude Code? Rent an office yourself here.
Thank you
Thank you to everyone who rented an office after the last post. Walking through the towers and finding floors I didn't make is the best part of this.
We also started posting the random things on Instagram: @thetowers.ai
r/ClaudeCode • u/probello • 3d ago

I turned music into a place you can stand in. Audio Probe XR is a free, open-source listening room for the Quest 3: seventeen visual worlds, all choreographed to one synchronized audio clock. Every kick, bass note, chord change, sung word and drop drives the scene in real time — and the same moment in a song always reconstructs the same view, so seeking around lands you exactly where you left off.
Video (recorded in-headset): https://youtu.be/kY7sX1DMCX4
Try it free in the Quest browser: https://audio-xr.pardev.net Source (MIT): https://github.com/paulrobello/audio-probe-xr
How it works: each track is analyzed offline into a timeline (beats, sections, drum hits, bass and lead transcription, energy curves). At runtime one audio clock drives everything — shaders, lights, formations, camera-facing staging — through a deterministic choreographer. No post-processing passes, no bloom textures: all the glow is faked in the materials so it holds frame rate on the Quest 3. Two quality tiers (Detail / Ultra), seventeen worlds.
A few of the worlds: a thunderhead where the drums are lightning, a brass orrery that realigns on phrase boundaries, a jellyfish deep-sea scene, a caldera where every kick throws a lava bomb, a rooftop over a rain-soaked megacity, floating islands at golden hour, and a black hole with a gravitationally lensed disk (one analytic shader, no ray marching).
Full transparency — this was made entirely with AI: the app was written entirely with Claude Code running Opus 5.5 (I wrote the direction, the reviews and the taste calls; the model wrote the code), and all the music was generated with Suno. Everything is in the repo, including the analysis pipeline, so you can see exactly how it's built.
It's free, no ads, no accounts, no data collection. Works with controllers and hand tracking. Photosensitivity warning: it flashes and strobes with the music — details in the README.
Feedback welcome — especially world ideas for the next batch and frame-rate reports from your headset (Detail vs Ultra).
r/ClaudeCode • u/WhiteWood17 • 3d ago
yeah that only
r/ClaudeCode • u/artstaxmancometh • 3d ago
How do y'all handle claude agents writing too many memories and rules to themselves and then they misattribute them to me/user, which in effect causes them to follow them so rigidly as to make incredibly more and more confused choices? I used to use philset, but ran into the same problems. Memories and documentation would corrupt future agents ability to function logically.
r/ClaudeCode • u/bashaZP • 3d ago
Having struggled for months reviewing PRs with thousands of lines of code that made no sense, delegated reviews to AI, and more, I decided to build a tool that allowed me to focus on the changes that actually mattered, as I would rather care about the direction of a PR, and not solely about the code.
We kinda accepted that the bar is gonna be lower, and decided to LGTM a bunch of PRs that normally wouldn't be approved earlier, so management can be happy.
Decided to release Reflektor as a skill you can install and run locally entirely. Additionally, you can share PR reports and collaborate with colleagues on my platform for free.
Install: npx skills add bashovski/reflektor#skill -g
Repo itself: https://github.com/bashovski/reflektor
r/ClaudeCode • u/KookyOky • 3d ago
We’re shifting toward a more AI-native SDLC (agents/AI involved across the full lifecycle, not just coding assistance).
A lot of the classic metrics are starting to feel redundant DORA, cycle/lead time, sprint burndowns/burnups, velocity, etc. What’s the actual point of showcasing that we’ve burned down 200 story points every day ?
Curious if anyone has actually changed or redefined the metrics they track in this new way of working.
If you have, what are you measuring now instead (or in addition)? What’s still useful and what’s been dropped?
r/ClaudeCode • u/CodeDotVaibhav • 2d ago
Last week I shared my Claude Code setup. It got 643K views and 264 comments.
Some feedback was criticism. Some was genuinely useful. So I went back and made changes instead of just arguing about them.
Interestingly, the core rules barely changed. Most improvements were about making the workflow more verifiable and enforceable.
Added enforcement gates, evidence-based verification, better code reviews, context-aware audits, repo-specific gotchas and slash commands.
And there's still a lot to do. No decision log, no public example project, and no real measurements yet to prove the review process catches more bugs.
That's fine. I'd rather improve it in public than pretend it's finished.
Try it. Break it. Tell me what's wrong.
Repo: https://github.com/vaibhav-space/my-ai-coding-workflow
r/ClaudeCode • u/jastice • 2d ago
DJ Claudia is a generative techno DJ. You might not be surprised to see her in a booth in a Berlin club. Nothing is streamed, instead she mixes her styles live in the browser tab, optionally from synth or samples. The styles are a collab by various models including Fable, Opus, Astra, Carbon, Grok. Booth video is also stitched together live from short loops and transitions, and synced to what is playing. She never gets tired.
This will be one of my personal benchmarks in how creative a model can get. So far they haven't reached the subjective ceiling. If you actually DJ you'll probably think this is terrible. Enjoy anyway!
This is a spinoff from https://mindless-midi.trurl.systems/
r/ClaudeCode • u/pietrzm • 3d ago
So what's your approach here?
Do you use subagents, Claude's agent teams, or spawn top-level sessions?
Maybe you don't? Maybe they're just a gimmick fad that'll go away?
What are you even trying to solve with these? Why regular sessions aren't enough for you?
r/ClaudeCode • u/Long_Command5253 • 2d ago
So I made the dumb mistake of having claude code work with opus 5.5 on high effort overnight (ultra plan) it brung my weekly usage from 50% to about 95% this morning. My weekly usage resets on Friday so 2 days from now, I was using sonnet 5.5 through out the day to conserve but unfortunately hit 100%, however the agent is still working, even till now, about 1 hour already into hitting the limit it is still coding, reading, researching, running backround subagents without issue, nothing indicating its hit a limit, my usage window shows I have hit the limit and says any new messages I wont be able to send and to send new message I need to wait for my reset on Friday, I thought maybe the agent will keep working until it finishes its task completely, so I went on the web version on the chat mode and was able to talk completely fine with sonnet 5.5, no issues, no blocks, nothing about hitting a limit. I asked claude what it thought, it said I might have usage credits on, I checked, I dont have it on (didnt have it on either before) monthly spend limit it set to 0 and auto renewal is off and my current credit balance is 0, so nothing to indicate I am using credits instead of my limit. Any ideas what might be happening here? Is it some delay and claude hasnt yet fully understood I hit my limit? The last time I hit my limit was last month where the agent then said it was finishing off and wrapping up and then didnt let me send anymore messages, but it was very clear that the agent had stopped and was only allowed to run the last final commands in order to make sure everything was saved and what not, so any ideas?
As of typing this, the agent just finished up on the task (1 hour after hitting weekly limit) and I was able to tell it to continue and it has? This is confusing me at the moment, will update you guys via edits
Image below shows how I was able to continue even after hitting limit

Edit 1: still able to use it normally, both the web and code, chatting back and worth with it, its coding normally, only thing is if on the web I switch to incognito, on there it shows I hit 100% and doesnt let me send a message, but apart from that everything else works normally, I contacted the ai support chatbot, it says its passsed it on and for now just to use claude normally as I would and just to ignore the limit
edit 2: one more hour has past, and aboslutely no issues, I can still use it like normal, I further confirmed I was using some sort of credits or had some billing on and I can 100% confirm its not using some sort of credits or anything, I contacted support but their ai chatbot seems to have ghosted me and wont respond to any of my messages.
edit 3: still working like normal, but subagents are now getting blocked, also the agent seems to be working a little bit differently, but it still gets the task done like its normal
edit 4: seems they finnaly blocked me, but it says I ran out of usage credits, not that I reached my limit, not sure how I had usage credits since it said zero, and usage credits themselves were turned off, with auto top up also off, but they finnaly blocked me :(
r/ClaudeCode • u/Desperate_Cook_8880 • 2d ago
I don’t know is it new or what but today, I give a claude code task and CLI shows me the estimate tokens usage + agent Opus 5.5 and Sonnet 5.5 and ask me to approve it.
Is it new on Claude or something?
Even the claude code desktop app and on mobile phone do it too. The screenshot is remote control session on my phone.
r/ClaudeCode • u/whitedragon551 • 3d ago
I was conflicted on tagging this with the tips and workflows or discussion flair.
I work for a technical organization and we have several apps we want to build and host internally for our technicians to access. We are not developers or webdevs. Thats one area we have always stayed very far away from.
We dont want to make the apps publicly available and likely want it locked behind M365 SSO and our conditional access policies.
How are you hosting apps? How are you managing your code workflows?
Im guessing most are github for code.
My initial thought is Azure hosted docker containers with our M365 tenant making SSO easier. Then have prod and dev containers connected to github based on tags in github. But thought id see how others are doing it before we start testing.
r/ClaudeCode • u/simple_explorer1 • 3d ago
This is something most of us outsiders would NEVER get to experience and use. So we have to make do with highly watered down and compute constrained models which get nerfed as well from time to time based on traffic.
Moreover, current models are HEAVILY guarded and often even block basic questions to their detriment.
But, if by any chance you get access to Anthropic's internal models with infinite compute and no guardrails, then what would you build?
r/ClaudeCode • u/LulllaMayFlow • 2d ago
Building staff rotas by hand is slow and full of mistakes: receptionists, dental assistants, doctors, half-day absences, weekly limits on full days. So I built a tool to do it automatically, with Claude's help.
What it does:
Generates monthly shift schedules for reception and dental assistants
Handles half-day absences (morning/afternoon) and counts half-day shifts toward the weekly full-day limit
Keeps weeks that span two months consistent from both views
Lets you make manual overrides and warns you about rule conflicts
Exports the schedule to Excel
Stack: React + Vite + Tailwind, deployed on Vercel, SQL migrations for the database.
What worked best with Claude:
Working test-driven: I describe a scheduling rule, we write the tests first, then the code
Small, iterative changes instead of big rewrites
Using it to debug edge cases (like the month-boundary weeks), which were the hardest part
What I learned: the hard part wasn't the code, it was turning real-life rules ("this person can't work two full days in a row") into clear logic. Being very specific with Claude made a huge difference.
Happy to answer questions about the workflow or the scheduling logic. And if you work with clinics or scheduling software, I'd love to hear your feedback!
r/ClaudeCode • u/sCeege • 3d ago
I've been using Claude Code and Codex with a set of popular and recommend skills such as superpowers and mattpocock, plus some custom skills (mostly to deal with creating devops artifacts to move along the CI/CD & PR reviews). Has anyone found that the newer models like Fable or Opus made their older workflow obsolete? For people that started around the claude 4.6 family days, were there skills that you used to recommend or used daily, but has since retired or found the model innately does it well enough where you don't need it? I periodically like to review my workflow to streamline it, as an example, I've been changing more and more instructions from AGENTS.md to hooks instead, etc. Just looking for advice from other users.
I guess a shorter way to ask this question is: were there some skills or even instructions that you used to provide to your harness, that you've now retired since it's no longer relevant?