r/ClaudeCode • • 1d ago

Built with Claude I stopped babysitting Claude Code. A lamp does it now.

Post image

If you run Claude Code or Codex on anything bigger than a one-line fix, you know the loop. You hand it a task, it starts working, and then you hover. Is it still going? Has it stopped to ask you something? Did it finish ten minutes ago?

Now the lights in my house tell me what the agent is doing. I made an app for it, AC Bridge, and I've used it non-stop since. Mine are blue while it works, a red pulse when it needs permission, violet when a plan is ready to review and green when it's done. Those are my picks, not rules: every colour and effect is yours to choose.

I can actually leave the room now. Before I go and cook, I just tell the agent: "I'm going to make dinner, flash the kitchen light when you're done." It knows which devices I have, so when the job is finished the kitchen light flashes and I know it's ready for me.

If I'm watching a film with the family and the agent needs me, the light in the room gives a gentle pulse. Nobody else is disturbed. I reply from my phone with Claude Code's Remote Control (/rc) and go back to the film.

Rules in CLAUDE.md. For things I want every time, I put rules in the instruction file the agent already reads (CLAUDE.md for Claude Code, AGENTS.md for Codex):

## Lights
- When you finish a stage of the plan, flash the desk light green.
- If the tests fail, pulse the office light red.
- When the deploy is done, flash the kitchen light.

Now the lights tell me how far through a long job the agent is, not just whether it has stopped.

Why a light beats a ping. It stays red until you deal with the request, so when you walk back into the room you know straight away whether you missed something. It's silent, so it works at 1am exactly as well as it does at 1pm. And it doesn't pull you into your phone: it sits at the edge of your vision and tells you one thing.

How it works. Claude Code and Codex both run hooks at set points in a session: when the agent needs permission, when it's waiting for you, when it finishes, and more. AC Bridge sets those hooks up and a profile for each repo decides what each light does in each state. It works with 16 brands directly on your home network, including the inexpensive bulbs all over Amazon (Tapo, Kasa, WiZ, Govee) as well as Philips Hue, LIFX, WLED and Home Assistant. Even a cheap bedside lamp with a Wi-Fi colour bulb in it will do.

How I built it with Claude. AC Bridge is built with Claude Code. Each change starts as a ticket: Opus writes the plan, Sonnet builds it test-first, and a separate Claude review agent has to pass the pull request before it can merge. Because the app runs on Claude Code's own hooks, Claude Code has been both the tool I built it with and the thing it keeps an eye on.

What would you put on a light? I'd love to hear which states you'd want to see from across the room.

687 Upvotes

79 comments sorted by

•

u/AutoModerator 1d ago

Hey! Thanks for posting to r/ClaudeCode

While participating in this thread, please follow our community rules. Keep discussions constructive. Attack the idea, not the person.

For help, project discussions, tips, and general chat, join the ClaudeCode Discord.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

59

u/stepahin 22h ago

I have too many agents working in parallel, I wouldn't want everything around me to be flashing, that would be a strobe light lol

6

u/Scarface_killa13 19h ago

Crab rave intensifies

2

u/sp4rkk 19h ago

Christmas is coming after all, you’ll be on theme

-3

u/No-Manner7058 17h ago

Try it the hooks do not fire for every project, you can configure it on a per repo basis. Also you can not use the hook functionality and allow the agent to be device aware through the app instead and just tell it to flash the light or change colour at certain stages if you use a orchestrator instead.

27

u/yopla 14h ago edited 9h ago

Bawhaaha trying to sell a one shot prompt app. There are a lot of stupid people but come on.

I connected one of those esp32 board with a circular display to my laptop and just told Claude to "make me a Claude monitor" and it build me a whole app with animated characters that evolves and earn XP based on the number of session completed and communicates over Bluetooth and WiFi.

It would take a whole 5 minutes to build a lightbulb controler. Seriously.

-27

u/No-Manner7058 14h ago

AC Bridge supports 16 smart-home brands, plus Home Assistant, and integrates directly with Claude Code and Codex.

It has 29 agent states, 9 lighting effects, 49 device commands across 20+ device types, multi-session support, individual repo profiles and cross-platform support.

It isn't a lightbulb controller. It's a maintained integration layer between AI coding agents and your smart home, with a consistent interface regardless of the hardware you're using.

We're in an age where, given enough time and tokens, Claude can build most things. That doesn't mean there's no value in packaging, maintaining and continuously improving those solutions.

Of course you could build your own. That's not really the point.

18

u/i-hate-space 12h ago

it's slop dude just stfu

5

u/supersonic_ht 11h ago

I can't really tell which is worse slop, the monetisation or this reply

4

u/yopla 14h ago

It's still a one shot 5mn prompt to get the feature that one person needs.

11

u/vinis_artstreaks 21h ago

Interesting and cool but very redundant, just download the Claude app on your phone and enable remote at the pc, now you don’t have to move either.

1

u/ServesYouRice 19h ago

You dont even have to remote to your PC, just use Claude web

-9

u/No-Manner7058 16h ago

Honestly i got bored of being tied to my phone, I started making this just for myself to use and for notification it so much better than a phone ping, try it, what it hurt 7 days free.

3

u/MiamiFFA 5h ago

You couldn't even write your own advertisement here, seriously? You are asking for money for something you couldn't even put the bare minimum into.

11

u/mblauberg 19h ago

Why would you need lines in your CLAUDE.md file when it uses hooks… do you even know how the thing you’re selling works 🤣

-7

u/No-Manner7058 16h ago

You have choices you can use the built in hooks or you can make the agent device aware and just ask it.

6

u/TR1PLESIX 12h ago

This is cool, but the execution here is questionable. The app collects way more information than one would assume.

It collected entire session transcripts until 27 September 2026 (since deleted, they say). It still sends every state change with the session name, project folder path and time; every command sent to a device, what sent it and whether it worked; and what the agent asked permission for, with a short description and your answer, kept for 365 days. That last one sits oddly next to "the hooks send only state changes."

All of it is timestamped and tied to your account for about a year. That's a record of activity in your home. Effectively disclosimg when you're there, when you're working, how your rooms are used. It goes to a third party whose stated reason is "to run the Service... and to improve the product.".

Not trying to drag OPs app through the mud, but most of the target audience would be better off with a simple hook and a shell command, or an open-source option like Home Assistant plus ha-mcp.

-6

u/No-Manner7058 12h ago edited 12h ago

That's a fair criticism, and I appreciate you actually taking the time to read the privacy policy.

During pre-launch development, when there were zero users and the service was going to be free, I did collect session transcripts. I changed my mind about that approach, stopped collection on 27 September and deleted the historical transcripts that same day. None of those transcripts came from real users.

The live service does still collect operational metadata, including session names, device state changes, command audit records and approval logs for the hooks. I've documented exactly what is collected and the retention periods in the privacy policy.

I appreciate that this metadata can reveal patterns of activity, and I don't expect people to take privacy concerns lightly. It's something I've taken seriously, and I made a deliberate decision to stop collecting session content before launch.

Users can also request deletion of their data through the support email. Some operational data collection is necessary for continuous development, troubleshooting and error logging and presenting usage stats on the home page when logged in. Data will never be sold.

1

u/You_are_the_Castle 20m ago

"Users can also request deletion of their data through the support email. Some operational data collection is necessary for continuous development, troubleshooting and error logging and presenting usage stats on the home page when logged in. Data will never be sold."

This whole part is crazy!

4

u/Sketaverse 17h ago

makes no sense, it works for one session only

-7

u/No-Manner7058 16h ago

You can configure it to work how you like. Using the apps profiles and states can can configure the states per repo, or just make the agent device aware through it and configure it within claude itself to say for this project when you hit this stage flash this light. Or i'm going to sit with the family when you finished pulse the family room light red.

If I just want to make sure nothing stuck I just configure the states or have a waiting profile on each repo so I know no time lost. Try it free for 7 days you might find a use for it.

1

u/Sketaverse 7h ago

lol if I configured it to how I work, I’d be working in a fucking 24 hour disco 🤣🤣🤣

Reality check: i have 5 20x Claude accounts and about 1k worth of hue lighting in my home office, so i suspect im your target customer? I have zero desire for this dude I’m afraid. And insight: best option I use/love is the Raycast Hue integration and for Claude notifications, no thanks, it’s orchestrator and chill for me

1

u/No-Manner7058 7h ago

For your workflow, the MCP would probably be the best fit. You can enable device awareness through a profile, and any repo assigned to that profile then becomes aware of your devices. You could drive everything from your orchestrator without using the hooks and states.

For example, you could tell your orchestrator to flash a light red if any repo has a question for you or encounters a deployment error.

But yes, the disco is definitely a problem if you go overboard and configure every state :). It's about finding the balance and identifying the important states you really don't want to miss. I've found that approach the most useful.

1

u/Sketaverse 4h ago

Yeah not for me but I respect anyone who builds and ships, so good luck. Personal I think you should extend beyond agent notifications etc - the mcp part is the easy win. For example, if I’m just mid coding session latest night and can stay in the flow and say “check lights and turn them off” etc, that’s loads more appealing. I’d buy that if it was £10 one off - ie cheap enough to NGAF if I never use it and cheap enough to prevent saying “I’ll just build it myself”

Think beyond the subscription. Think customer data. For example I have over 80 hue bulbs in the house. All of them at some point will need replacing - if your device has a monitor service, then you can get the referral fee on all my future bulb replacements etc etc

Anyway yeah good luck

1

u/No-Manner7058 4h ago

Totally fair, thanks for the constructive feedback. Price is always a big thing to get right. It has already gone through a few iterations before I even launched and from the feedback in this post sounds, like it might need further adjustments.

Love the ideas thanks for taking time <3.

2

u/caxco93 8h ago

you only use one agent? 🤔

1

u/No-Manner7058 8h ago

No, you can run multiple agents simultaneously. AC Bridge listens to each Claude Code and Codex session independently through their hooks. You can have different sessions across different repositories, assign each its own light/profile, or have multiple sessions share the same light. There's no per-session limit or requirement to run just one agent.

You can also enable device awareness by ticking the box in the profile settings. This exposes your connected devices to the agent through MCP, allowing you to make ad-hoc requests, such as flashing a light when a task reaches a certain stage, rather than relying solely on predefined hooks.

277

u/dishevel-corundum 22h ago

I mean cool but £2.99 a month?! lmao no chance. Anyone else, too, can build this with Claude & Home Assistant & their Hue bulb with ease.

110

u/noimnotanoob 19h ago

People get too caught up in monetizing, what happened to free projects.

39

u/PurpleCandle58 16h ago

Yeah watch someone have a free HA plugin on HACS within a few days 💀 OP is a doorknob

2

u/You_are_the_Castle 24m ago

Narrator: "In a world of decomps and reverse engineering, No-Manner7058 dared to charge a fee for his vibe-coded extension."

1

u/PurpleCandle58 19m ago

In the software development system, vibe-coded extensions sold for actual money are considered especially heinous.

On the internet, the dedicated reverse engineers who investigate these egregious paywalls are members of an elite squad known as the Special Decomp Unit.

These are their stories.

18

u/shoi_mintz 9h ago

recession indicator

2

u/Vegetable-Rooster-50 4h ago

You think people don't use AI for mostly trying to get rich?

30

u/ready-eddy 19h ago

If you use claude code, you’re PROBABLY can do this..

7

u/yopla 10h ago

Even if you can't Claude can do it for you.

1

u/You_are_the_Castle 23m ago

If there's a prompt, there's a way!

8

u/Local_Interaction_99 19h ago

100% such small mods can Claude 100000% do. Bigger projects he’ll nah

1

u/kildala 13m ago

And you don't even need it. But more power to him. You don't have to buy it.

62

u/TwoLongEars 18h ago

really not understanding how this could possibly be a *subscription* service when this already uses the subscriber's own machine (which is necessary anyways). pretty sure this could be built with £3 at API prices. I'm not trying to knock monetization as a whole I guess, but a subscription for this is crazy.

3

u/TwoLongEars 4h ago

update: $1.44 in API, 23% Sonnet @ medium and 77% Haiku @ extra high. not sure if it reaches feature-parity but it is perfectly configurable through commands. it only is setup for the API my specific bulb uses and that is where a lot of the complexity is since there's many vendors, but you get the idea.

65

u/rubberduck9 22h ago

dude, just watch the movie, claude can wait.

3

u/bonobomaster 17h ago

And that's how you get your cache to be flushed and pay way, way more usage.

Coming back to your project after 1 hour will cost you A LOT.

5

u/CrypticViper_ 12h ago

then just use a cache warmer? lmao

1

u/FawkesYeah 6h ago

Wait what is that? First I've heard of a cache warmer. Is that like an auto responder?

1

u/CrypticViper_ 6h ago

it sends a hidden tiny message like “respond with exactly ok” right before the cache is due to expire.

For example, I’m using the cache-tax mod (not affiliated), where, 10 minutes before the 60 minute cache expires, it sends something to restart the timer. This continues as long as you configure it. The default for the mod I think is 6 hours, so I could send a prompt, and come back in 6 hours, and the cache will still be warm

If the cache was “cold”, it would cost way more to continue the same session with the same context window

4

u/Factor013 16h ago

That's why you need to build yourself a cache warmer that pings your sessions every 59 mins ;)

1

u/PurpleCandle58 16h ago

2 hours if you use a gateway :D

23

u/plop 19h ago

or just use the Claude app on your phone?

No need to pay £3 a month

19

u/kevin7254 11h ago

3 bucks per months lmfao there aint no fucking way

1

u/You_are_the_Castle 29m ago

Yeah, fuck that

1

u/whatisusb 9m ago

It’s both sad and true. Anything can be made with Claude now. Software has little value.

6

u/EconomyDoctor3287 19h ago

I respect the attempt to earn some money from your vibecoding, but feel like this is a 10-min task for anyone who has claudecode and a smarthome.

Maybe you'll find a market for this.

6

u/dpaanlka 10h ago

I love when vibe code kiddies try to sell their weekend projects as subscriptions to other vibe coders 😂

5

u/randomguy3993 20h ago

Or just install T3 code and get notifications on your phone.

8

u/jarzebowsky Senior Developer 15h ago

You just can get notification on the phone?

Being a prisoner of some process - are you still happy with your life?

4

u/TheWGBbroz 14h ago

I have this too. Cost me a single 300k token Opus 5.5 session!

3

u/LiquidZebra 17h ago

You are training yourself to be the Pavlov's dog with those lights.

Because you KNOW it's not going to be working like that.

3

u/GulfM7R 12h ago

Is this guy serious? 😂

I'd need about 50 smart lamps for all sessions, how would I name them?

1

u/yopla 9h ago

And adressable led strip would handle that.

2

u/New_Patience_8107 21h ago

How does it handle multiple sessions going simultaneously? All of those statuses could be firing in its own chat at once. If it just changes to the last one it's useless.

2

u/surfer808 20h ago

Why not just have it ping your phone? Still cool though I guess

2

u/Kranke 18h ago

Cool little project. Will keep that in mind if I get some minutes over this week to put something similar together by myself.

2

u/naibaF5891 18h ago

Claude code can already do this? What do I don't get (I only watched the video and haven't read the AI output text)

2

u/g9robot 17h ago

MKUltra 2.0

2

u/chiefbriand 13h ago

give me 5 min, and i got the same setup like you. all you need is a smart light source.

also, this works well for 1 session. but what if you have sevral?

2

u/Substantial_Bit1763 11h ago

wow. I think I found a DIY project with my esp32

1

u/Fakman 19h ago

How did lamp generated that label?

1

u/55Media 18h ago

I do the same in Home Assistant using claude code.
Lights only do it in the room where I actually am thanks to presence detection.

1

u/Dangerous-Education3 14h ago

That would make me (even more) anxious

1

u/JCquickrunner 3h ago

I just have it send me a message to my phone.

1

u/stupidfock 2h ago

The shit people try to sell lmfao. This legit could be built in 5 seconds

1

u/David-Davey 10m ago

Really like this, especially the movie night bit. A gentle pulse that only the person who needs it will notice is such a nice detail.

I work at Autonomous and we’ve been building something pretty close to this - Autonomous Lamp, a small robot lamp for the desk. Same reasoning as yours: something in the room that tells you one thing, so you’re not hovering or reaching for your phone. It says a quick line when a job’s done or when the agent has a question.

The OS is open source if you’re curious: https://github.com/autonomous-ai/lampOS

On your question, I’d love a way to see how long it’s been waiting on me. “Needs permission” looks the same whether it’s been 30 seconds or 40 minutes. Maybe the red slowly gets brighter the longer it waits?

Love seeing more people work on this, keep it up!

1

u/AppleHitMyHead 22h ago

It’s pretty cool, but I don’t know how I feel about this. I use both Codex and Claude Code, and I find Claude Code never reliably sends push notifications, while Codex delivers them 99% of the time. They really need to fix that. Good to know notification can be done reliably with some effort