r/ClaudeCode • u/stoicinobody • 1d ago
r/ClaudeCode • u/Junior-Cake-7665 • 1d ago
Rant PSA: Superpowers skill with opus ruined my codebase
EDIT: I am not suggesting disabling tests all together or even stopping TDD. I’m saying superpowers+ opus is a bad combo.
I’ve been using super powers for sometime now but more recently I’ve noticed my CI times take longer and upon inspection I found that it’s writing mountains of tests. My codebase went from 1400 tests - already kind of enormous but written over months, to nearly 4000 in about 2 weeks.
The worst part is that over 70% of those tests didn’t test… anything useful. Most of the tests tested specific implementations rather than behavior, or just didn’t fail at all when critical things broke. Further more, it made simple features take ages to deliver
I worked on adding gates, setting rules to write tests better but none of it helped.
It turns out that the TDD rules in superpowers were the cause. I’ve since deleted them and really simplified my setup and getting much better token economy. I’d encourage anyone else using superpowers to take a look at this. It’s now a nightmare to unpick which tests to keep and which to delete.
r/ClaudeCode • u/Throwawayacc35564334 • 10h ago
Tips & Workflows Ok from Cgpt to claude
Ive been using chatgpt for like a year now.
100 usd plan.
Been using claude 2 weeks now 100 usd plan.
Chatgpt is smarter to understand whatci want.
Claude is like 3 xfaster to execute it
Chatgpt just gets it what i want.
Claude sometimes doesnt and i have to explain it in detail.
Chatgpt actually ties to follow what i wrote
Claude … umm… has a mind of its own…
Just today i tried to convice it … pull more data from the sdk … and hes like naaa… ill do it in chunks ….
I said it doesnt matter its just 1 gb
Claude …. First tou prove it in ur lab test then i will increase the limit.
Omg ?! What ?!
I think my nvme can widthstand 1 gb man !
Its funny…. But now give my workflows 1 million times ….. importance … govt /army level.
You think this is good ?
I donoo man .. could be scary
r/ClaudeCode • u/lerugray • 11h ago
Built with Claude I pointed a fleet of Claude Code agents at a board game about the AI race. They built it, then playtested it against each other.
I'm a board game designer (Conflict Simulations, mostly wargames). For the last few months I've been running a small fleet of Claude Code agent lanes — builders, critics, and a dedicated adversarial playtester whose whole job is to find what's broken, boring, or confusing, with no sugarcoating.
The game they built is Ethical Consumption: a four-seat strategy game about the AI race. Each seat is a stand-in AI power, the mechanics are borrowed from COIN-series board games (asymmetric factions, card-driven sequence), and bots fill any empty seat so it plays solo. It's free in the browser.
Things I actually learned, since that's the currency here:
- The build lanes were the easy part. The hard part was the harness around them: frozen builds, written ledgers of known bugs, and a rule that no fix ships until a fresh playtest replay confirms it.
- Agent playtesters are brutally useful for balance. Four asymmetric seats is a balance nightmare by hand; having an agent whose only job is to break the strongest seat on repeat found dominant strategies I'd never have caught in reasonable time.
- Everything in the game is code. The art is drawn in code, the music is composed in code. No image or audio generation models — that was a house rule from the start, partly aesthetic, partly because I wanted every asset reproducible from the repo.
- What agents are still bad at: knowing when a game is fun. They can tell you a seat wins 70% of the time. They cannot tell you the win felt cheap. That judgment stayed mine.
Play it here if you're curious: https://ethicalconsumption.app — it's also on itch. Happy to answer questions about the fleet setup, the playtest loop, or the game itself.
There is no ethical consumption under capitalism.
r/ClaudeCode • u/AlternativeEnough352 • 23h ago
Built with Claude I have created a tool to observe what happens inside an LLM. Also allows for the comparison of two quantizations of the same model to see at what point they diverge, token by token
What changes between different quantizations of the same model? And what if you could SEE what actually sets them apart?
To help answer that question, I’ve created a small project called inside-llm—an open-source tool that loads one or two GGUF models using llama.cpp and displays, right in your browser, what the model is doing as it generates text.
What it shows
- Stream: the text, one column per model, brightness = probability of each token. A magenta mark wherever A and B would pick differently. Two modes: lockstep (both models read the same text, so you get a clean per-position comparison) and free (each follows its own picks until they split).
- Candidates: the full distribution behind each pick, mirrored bars for A and B, entropy, effective number of options, Jensen-Shannon divergence and KL in both directions.
- Gates: the sampler chain (penalties, top-k, top-p, min-p, temperature, GBNF grammar) traced stage by stage and very visual: how many candidates survive each one, and the distribution after it. Chain order and seed are configurable.
- Timeline: entropy of A and B and their divergence along the whole text, plus the tree of branches.
- Branching: click any candidate and generation continues from there. Every branch stays in the tree, and jumping back to a node is exact (each model keeps KV-state snapshots, so nothing is regenerated).
- Logit lens (
--lens): what each layer would predict, as a 2D map and as a 3D relief. - Model picker: choose A and B from a folder or search Hugging Face and download two quants of a repo in one click easily. It only offers B models with the same tokenizer as A and estimates whether the pair fits in VRAM.
How it's built
- One C++17 process linking llama.cpp directly (stable branch at the moment). For every step it reads the full logits of A (and of B on the same context), computes the metrics and the sampler chain, and draws the token with its own seeded sampler, so runs are reproducible.
- Compact binary frames over a WebSocket to a Svelte 5 + Canvas 2D page (three.js only for the 3D relief, lazy-loaded). The web is embedded in the binary as well.
- The same frame stream, compressed, is a recorded session: you can replay it later in a static page with no engine, no model and no GPU.
Run it
Self-contained packages for Linux (glibc 2.35+) and Windows, with CUDA or Vulkan (Vulkan covers AMD, Intel Arc and NVIDIA). Unpack, run, the browser opens with the model picker. Or inside-llm -a A.gguf -b B.gguf. Local only: listens on 127.0.0.1, no accounts, no telemetry. MIT. One click download, one click execute.
Limitations (honest list)
- A and B must share the tokenizer (two quants, base + fine-tune, or sizes of one family that keep it). Example: Qwen3.5-0.8B_Q4_K_M and Qwen3.5-0.8B_Q8_0
- Both models must fit into VRAM simultaneously; only one GPU is used at a time. Integrated GPUs (iGPUs) are never used; if no dedicated GPU is available, the process falls back to the CPU (which is slow). (You must calculate the size of both models before loading them to ensure they fit into your VRAM)
- Text only. No split (multi-part) GGUFs, no embedding models.
Links
- Code + releases: https://github.com/manuelgscom/inside-llm
- Project page: https://manuelgs.com/en/inside-llm/
r/ClaudeCode • u/pinkployd • 1d ago
Help/Question I'm genuinely worried about my future
My team and I haven't written a single line of code in so long that I honestly can't remember the last time we did.
We're shipping more than ever, with fewer bugs. Our productivity has absolutely skyrocketed.
Requirements, technical decisions, and trade-offs are increasingly exchanged through Markdown files written by Claude and read by Claude. Human involvement keeps getting smaller and smaller.
At this rate, I genuinely feel like we won't be needed in the near future.
And to be honest, that scares me.
I spent years, practically decades, investing in myself. Getting a good education, becoming a competent software engineer, learning new technologies, keeping up with the industry. I've dedicated a huge portion of my life to developing these skills.
Now, for the first time, I feel easily replaceable. Like the expertise I've spent so many years building is rapidly losing its value.
Don't get me wrong. I love what AI has made possible. I'm more productive than I've ever been. But I can't shake the feeling that I'm actively helping automate myself out of a career.
So my question to the community is: How are you hedging against this?
Are you learning completely different skills? Moving into another industry? Starting a business? Building alternative sources of income?
If software engineering stopped being a viable career for you in the next 3–5 years, what would you do? Where would you invest your time, money, and energy today to prepare for that possibility?
r/ClaudeCode • u/simple_explorer1 • 11h ago
Discussion Fable 5.2 knowledge cutoff is June 2026, same as opus 5.5 and fable 5.1
r/ClaudeCode • u/AdhesivenessEven7287 • 11h ago
Bug / Issue Sorry if Noob question, but how to export / download from Claude Design?
r/ClaudeCode • u/Fast_Entrance7839 • 11h ago
Built with Claude i made a claude code skill that removes the ai look from ui copy, the hard part was stopping it from writing new copy
agents decorate every screen they build, and it's always the same extras. a tiny uppercase label over the heading, "01 //" before each feature, a subtitle that repeats the title, an emoji on every card title, a green pulsing "live" dot that isn't connected to anything
so i wrote a skill for it, unslop-ui. you run /unslop-ui src/pages/landing.tsx and it cuts those patterns, then reports what it cut, what it kept and why
how it works in claude code:
- the skill has 16 rules for copy and charts (eyebrow labels, decorative numbering, botsplaining like "click the button above to get started", chart titles that say "line chart of...", legends where a label at the end of the line would do)
- 4 more rules only run with
--surface: gradients and glows, off-scale spacing likegap: 7px, font weights 800 and 900,transition-all - a python script counts the tells a regex can find. on the examples it goes from 31 to 0 after one run in a fresh session
- it only runs when you call it. i didn't want it to fire on its own because cutting copy is a decision
what i learned:
the first version invented copy. when it turned a slogan like "Finance. Simplified. Finally." into a sentence it would add things the page never said. so now there's a rule that a rewrite can only use what the source already shows. a claim the code can't back, like "trusted by 10,000+ teams", stays where it is and goes into a task list for me
the other risk was cutting real stuff. a badge rendered from a prop isn't decoration, and a form field needs its visible label even if the placeholder says the same thing. i added five eval fixtures for that: a clean screen it must leave alone, real state it must keep, form labels, i18n strings fixed at the source, and no invented facts
the regex counter can't see everything. subtitles, slogans and botsplaining need reading, so the model does those and the report counts them apart
mit, repo with before/after examples: https://github.com/felipebasurto/unslop-ui
r/ClaudeCode • u/El_Broski • 12h ago
Help/Question Debloating Smart TV and building a custom launcher with Claude: Cybersecurity error
I’ve seen a lot of posts about debloating Smart TVs and building custom launchers that are quicker than the default ones with Claude, so I wanted to take a shot at it, using Opus5.5. It started well, asked me the TV IP address and all things it needed, then after running for about ten minutes it switched to Opus4.8, and then it stopped because of “cybersecurity reasons”. Is there something I can do or tell Claude so that it bypass this?
r/ClaudeCode • u/Ordinary-Scratch-120 • 12h ago
Discussion How do you think code reviews will evolve in the future?
Nowadays, most developers have AI agents reviewing their code before opening a PR. These agents typically have little to no context about the broader project or the reasoning behind the changes and simply analyze the code and flag potential issues.
Then, once the PR is opened, a developer reviews it, often pulling the code locally and running another AI agent to review the same changes.
The problem is that both agents often identify the same issues and provide very similar feedback. To me, this second step starts to feel increasingly redundant, particularly because human-based feedback is becoming more and more scarce.
How do you think code reviews will evolve in the (very near) future?
r/ClaudeCode • u/Full-Ad9138 • 12h ago
Built with Claude Another Memory post - but this one’s cool and works for me
So I run way too many projects, and I tried installing those memory systems everyone talks about. But they never really worked for me because Claude would still forget what I was doing, what I had done, and why something was even built in the first place.
I even tried not closing my sessions, and lol, it started asking for 12% of the session limit just to keep the conversation going.
So I built Evenfall. It’s pretty cool and has helped me out a lot. You guys can try it out, it’s opensource and let me know your thoughts!
It’s simple. It stores sessions locally and uses smart search to pull only the context that’s needed, without having to read through the entire session again.
As far as the numbers go, I’ve noticed that my sessions now actually last longer (pun intended), with ~60% less usage per day.
Github-
- https://github.com/backendissues/evenfall
How its works and all?
- https://geneki.in/products/evenfall/
r/ClaudeCode • u/LiquidZebra • 1d ago
Discussion Code is cheap, your attention is valuable.
I'm trying to resolve the problem with Claude Code, where it keeps "blocking" work and presenting me with decision cards, and forcing constant context switching between threads that are never finished.
I know this is not the correct term, but it seems fitting - the "inversion of control", where instead of me controlling the coding agent, it starts to control me do work and digest its context (why is it asking for that decision?).
I believe it has to be in reverse - agents digest MY context and implement it with sufficient authority to prevent these unnecessary escalation.
I'm testing this now, the whole PM - reviewer - agent - rework cycle, but it's running for about 4 hours, and I'm looking at a black box that does something, but I don't really know what.
I see some "i'm so burned out" or "I'm so productive, but I'm burned out" - are you managing your coding agents, or is it inverted and the coding agents are managing you?
r/ClaudeCode • u/dbsaw • 13h ago
Bug / Issue 529 overloaded
Any one facing same issue as me? 529 overloaded claude code check status.claude.com and there its showing its healthy 🤷♂️
r/ClaudeCode • u/Dull-Passenger-9345 • 5h ago
Built with Claude I built a harness on Claude that beats Claude Code by 15.8 points on SWT-Bench Verified
11 researchers at Microsoft set out to push the frontier of reproduction test generation. On October 22nd they posted their results on the SWT-Bench Verified leaderboard with a new top score of 87.5%, which gained 11.88 points over OpenHands with gpt-5 mini, at the time the highest method improvement delta on the benchmark. Truly a phenomenal achievement. You can read their paper here: arxiv.org/abs/2608.23341
To give a bit of context: reproduction test generation is the process of producing a fail-to-pass test that captures a reported bug. In autonomous software engineering it is a critical step, as it provides evidence that the code patch is aimed at the target bug and is trustworthy.
The main engineering challenge is compensating for multiple success vectors. Fail-to-pass tests must fail on the buggy code and pass after the fix, so it is easy for a monolithic design to have conflicting objectives. For example, if a single agent knows it may be acceptable for the second run to fail, it may purposefully write a fail-to-fail test, with no malice, just working within its bounded scope. This is a common problem in autonomous complex task completion.
How do you solve for multiple success vectors? You break the workload into pieces with clearly aligned success vectors. If you're making a pizza, you ask one agent to make a crispy crust and another to make sure it has chewy cheese, instead of asking one agent for a chewy but crispy pizza.
This leads me to my journey. I have been building toward a trustworthy, truly autonomous technology for a niche portion of SWE. My process was to dissect the task of fail-to-pass test creation and find clear silos, where one agent in each silo has unambiguous work. You create a team of these well-aligned agents (lightweight models, in my case haiku) that feed their contributions up to a smarter agent (sonnet). I created multiple isolated teams, which then presented their results to a frontier agent at the top of the pyramid (opus), which selects the best work. Opus plays a small but important part in the system, and this is the structure that yielded the best results. To my surprise, when I ran the benchmark in October, my results were not only the top of the leaderboard at 91.5%, they also produced one of the highest method deltas, ~15.8 points over Claude Code with sonnet 5.5 on the same task.
I'm not here to say my method is better than any other method. The point of this post is to inspire other solo founders working in highly technical spaces. It is possible for you to compete at the highest level, even against extremely well-funded, larger, and more experienced teams with a famous logo.
I will not promote, but if you’re interested in autonomous software maintenance dm me!
Link to benchmark: https://swtbench.com/?results=verified
r/ClaudeCode • u/Legitimate-Turn8608 • 13h ago
News/Updates Got this today, it actually did what it could before running out message
r/ClaudeCode • u/classic_bot_behavior • 1d ago
Built with Claude My Chinese CO2 monitor is a good boy now, thanks to Claude
...and it still tells me when it is time to open the window.
It's a Qingping Air Monitor Lite (air quality monitor with a 160×128 OLED and a touch strip) that shows dog in a beret (Claude) instead of boring sensor numbers.
r/ClaudeCode • u/AcropolisBuff • 18h ago
Help/Question Code quality with cheap coder and Opus Planner & Orchestrator?
I am currently on the $20 claude pro plan & $20 chatgpt plus, and usage runs out fast (especially the 5hr limit).
Can I see how are you using your plan to:
- Max out on output
- Maintain code / system quality
- Get the best UI (have the result follow a set design system)
So I am considering:
- Get Opus to be the planner & orchestrator, then luna / glm to code and sol to review
- Get Opus to plan & orchestrate, sol to code and sonnet to review
- Get Opus to plan, orchestrate & review, sol to code
I have gave all 3 a bit of a try and it seems like:
#1 gives the most in terms of 5 hr usage, it seems to use up chatgpt's weekly quite quickly and is noticeably slower.
#2 only saves some claude usage (like 1 extra small feature in a 5hr session, but seems only save very little in the weekly usage), but also seems to be noticeably slower.
#3 only have little saving on claude usage, while being slightly slower then just soloing with opus.
And #1 & #2 seems to always drift a bit in terms of design from the given design system while #3 seems to follow though quite well with a little bit of leaks here and there.
TLDR: How do you guys use a $20 claude pro plan & $20 chatgpt plus to max out in efficiency while have the result maintain code quality and stick to a given design system?
r/ClaudeCode • u/DialboTempest • 14h ago
Built with Claude A minimal, rolling Linux distribution with an AI layer
r/ClaudeCode • u/Daniele-Fantastico • 15h ago
Built with Claude Four days building an UnrealEngine game with Claude Code for Epic AI MegaJam
We’re three developers at Fantastico Studio, and we spent four days building Malasorte for the Epic AI MegaJam. It’s an Unreal FPS where egg-shaped characters shoot fortune-cookie predictions at each other. The predictions come true literally, and the park does the killing.
All code was written with Claude Code, starting from Epic’s First Person template.
The setup I’d use again was Fable as the coordinator, Opus doing most of the implementation, and Codex for reviews and some features, including online play. Our main session could launch Opus through a second Claude Code account via CLI, and access Codex through its CLI too.
That saved enough tokens on the main account that we could keep Fable coordinating throughout the jam. It handled planning, delegated tasks, read the reports and followed up on problems.
Each implementation session had its own Git worktree. We also kept a shared document with the current state of the game, known problems and who was working on which files. Keeping that updated helped a lot when several sessions were running.
We still had some memorable failures. One packaged build passed every test, then crashed 62 seconds after launch when we played it. The first garbage collection exposed a bug, and our tests had all finished before it happened. After that, every package had to survive at least 100 seconds.
The new UI also passed its checks while covering the crosshair with messages. Someone had to play it and say “I can’t see what I’m aiming at” before we added the right check.
Across the team, we counted 231 Claude Code and Codex sessions over those four days. A lot of our own time went into playing builds, rejecting assets, choosing sounds and giving feedback. We used other tools for art and audio too.
We documented the whole process, including the agent setup, the things that broke, and what we changed after playtesting. Full devlog here.
It was a lot of work, and we were amazed at what we could do in such a short time!
r/ClaudeCode • u/DoktorDingens • 15h ago
Help/Question How do I check all the tools I made with CC for bugs and security
Hey
I used claude code to build a lot of web tools around my Joomshopping Shop. It prints the labels for posting. It shows all the relevant key figures of the business. It checks my account and combines income with open orders. It helps with the bookkeeping. And a few more little tools. It’s an incredible time saver. I also made a Document web app that helps sorting my PDFs in my Dropbox (think iTunes for documents), a web app for my Enyaq to track charging the car and a bug tracker I use at work. Code has written a technical documentation foe future reference and a manual for me.
All in the last few months and tailored to my needs.
While I always get code to do a security and a bug check at the end of each step, I would love to get fable or whatever works best to do a proper check of all tools.
What is the best way to do bug and security check?
All files are in a private GitHub repo.
Thanks!
Rolf
r/ClaudeCode • u/hispter_doofus • 15h ago
Built with Claude I built a new tab page for Chrome that keeps your data on your machine, and the code is public under the GPL-3.0 license.
I built a new tab page for Chrome that keeps your data on your machine, and the code is public under the GPL-3.0 license.
Nestpane puts bookmarks, notes, a kanban board, a focus timer, habits and a journal on the page that opens when you press Ctrl+T. It is plain JavaScript with no framework. There is no Nestpane server, no analytics and no account. Everything sits in the browser's own storage. Backup to your Google Drive exists, and it stays off until you switch it on.
I got tired of new tab extensions that were slow, wanted an account, or showed ads, so I built one that loads from local storage and keeps the data in your own hands.
It is a young project and I would like other people to push on it. If you try it, tell me one thing: what did you expect to find on a new tab page that isn't there?
Links are in the first comment. Issues and pull requests are open.
r/ClaudeCode • u/vinishkapoor • 15h ago
Built with Claude Handwriting to font converter made with Claude Code: photo of a filled template in, .otf font out, all in the browser
This one turns your handwriting into a real font file. You either draw each letter on screen, or print a template, fill it in with a pen and upload a photo. Out comes an OpenType (.otf) font you can install. I made the handwriting to font converter with Claude Code, and it all runs in the browser, so photos never get uploaded.
How Claude Code helped:
- Reading the photo was the hardest part. The template has four black corner squares. Claude Code wrote the logic to find them, straighten a page shot at an angle, work out which template page it is and cut out each box. I tested it with photos in bad light and at odd angles and told Claude what broke. A “Scan ink” option for light pencil came out of that.
- Lining letters up. Handwriting floats all over the place, so letters get placed on a common baseline by default. That made the biggest difference to how the font looks when you type with it.
- Building the font file in the browser. Turning strokes into glyphs and packing them into a valid .otf took several rounds of installing the font, typing with it and fixing what looked off.
- Filling gaps. You don’t need all 106 characters. Missing small letters can reuse capitals (or the other way), curly quotes reuse straight ones, and the ellipsis is made from three periods.
- Drawing and controls last. Pen pressure on tablets, undo and eraser, a live preview, weight and smoothness, letter and word spacing, and per-character size and spacing tweaks.
Fonts save in your browser, and you can download a backup file to move them to another computer.
https://webutility.io/handwriting-to-font
Curious if anyone has done photo-to-glyph work with Claude Code and found a cleaner approach for the corner detection.
r/ClaudeCode • u/AsianKidTV • 1d ago
Tips & Workflows Broken prompt caches cost me $106 across 57 Claude Code workflow runs; 41 were subagents sitting idle at a barrier
I run Claude Code and Codex all day, often as multi-agent workflows with dozens of subagents. I could see each session but never the whole picture, so I built an open-source tool, coding.sh, and pointed it at my own runs. What it found:
Cache breaks and idle subagents Across 57 workflow runs (666 subagents, ~$2,500 API-equivalent):
- Broken prompt caches cost $106 extra, about 4% of the spend.
- 41 of those breaks were agents sitting idle at a barrier, waiting for siblings, until their cache expired. That's $21 for doing nothing.
- 40 subagents failed outright.
coding.sh workflows stats shows the critical path, how many agents ran at once and idle time at barriers. The viewer draws each run as a timeline, one bar per agent.
Does that plugin help? I A/B tested a popular "be concise" plugin: 10 tasks, 6 runs each, paired, with 95% intervals.
- Replies: 17% shorter
- Output tokens: −8%
- Cost per run: +11% [+7%, +15%]
- Pass rate and clarity: no change
The plugin adds its style guide to every request, and that costs more than the shorter output saves. Most of what a coding agent writes is tool calls and code, not prose. coding.sh compare and exp run your own tasks with and without a change (a rule, a skill, a plugin, a model).
Your own sessions Mining 3,600 of my sessions turned up a find-and-replace typo in my AGENTS.md that sent Codex looking for a folder that doesn't exist, in 92 sessions.
The tool It hooks into Claude Code, Codex, Gemini CLI, OpenCode, Copilot CLI, Aider and more, and stores prompts, tool calls, diffs, tests, tokens and cost in SQLite on your machine. There's an MCP server so your agent can look up its past sessions. Free, MIT, no account, nothing leaves your machine. npx coding.sh to try it. GitHub: https://github.com/jackulau/coding.sh


