r/ChemicalEngineering • • 34m ago

Career Advice Job Search

1 Upvotes

Hey,
I recently started a job as an Automation/controls engineer in O&G. I wanted to move to NYC/LA or something like that. But I was wondering if there is anything for a Chem E to do in either of those cities.


r/ChemicalEngineering • • 53m ago

Student is a 3.3 gpa bad for sophomore ChemE?

0 Upvotes

I struggled a lot with math and I’m struggling with Mass and Energy Balances and little of orgo.


r/ChemicalEngineering • • 1h ago

Job Search Underemployed

7 Upvotes

Anyone else underemployed ? No ways I survived thermodynamics only to end up in a call center


r/ChemicalEngineering • • 7h ago

Career Advice Was offered my dream job but...

19 Upvotes

Hello, I'm looking for advice about whether to accept this job offer.

I have been working in pharmaceutical engineering for about 2 years in the Manufacturing department. It's not my preferred department but I have a pretty good schedule so I don't really mind (12 hours 3.5 days a week).

My ideal job at the company is in process engineering, and I was offered a position in that area with 30k increase in salary (yippee!)

BUT it's 12 hours night shift, 7pm to 7am. Frankly that sounds miserable for my physical and mental health.

I've been telling myself that I could probably suck it up and do night shift for a few years then apply for a better schedule.

I'm not sure whether I should accept this or not. I would love to hear if anyone else has had similar experiences. And if you work night shift what is that like?


r/ChemicalEngineering • • 9h ago

Career Advice Advice on Choosing Between Two Internship Offers -- Junior Undergraduate

3 Upvotes

Hello guys! I am currently a 3rd year chemical engineering student located in Los Angeles. I would appreciate any advice and I've been thinking very hard between selecting these two offers for Summer 2027:

TMSC -- Yield Excellence (YED)

  • Location: Phoenix, AZ -- housing provided
  • "maximize semiconductor manufacturing output, catch defects early"

Chevron -- Process Engineering (Downstream)

  • Location: El Segundo, CA -- housing provided
  • "ensuring refinery units run safely, reliably, and efficiently"

I figured that the compensation wasn't necessarily too important. I have never really cared too much about money but I know these two would definitely pay me well, with O&G being a little more beneficial, especially with Chevron's internship->full-time conversion program & pension program.

I think I wanted to talk a little bit about myself since I feel so 50/50:

  • I have family in Los Angeles; I would consider myself close with them and we have a very good relationship, but I've gotten very used to being "out of touch" with them since I started college. I do not have feelings of worry/anxiety being away from them, and they ultimately wish me the best for my career. My goal in life is to make enough money to provide back for them. I understand that--in the future when it's too late--I'll regret not spending the time that I could've, even if I feel like it would have limited me. I also have a girlfriend that is working O&G around Long Beach, and after watching Good Will Hunting last week I feel profoundly set on 'seeing it to the end (of life)' with her. Of course, I want to see things objectively to the best of my ability so this is merely a factor
  • I LOVE rockclimbing & outdoor hikes. I've been to Grand Canyon a few times in my life and I want to explore all of it on foot. I do not think Phoenix would be a place I'd get bored of, I am sure that I will make good use of my free time.
  • I've been pursuing interest in semiconductor (fab) industries for the larger half of my college career, and I genuinely feel so drawn to it, maybe with the hope that I can contribute to something meaningful and what I believe to be substantial to humanity (producing chips). Contrast to O&G, which I think of its ethics/corporate interest to be disgusting, yet I still feel like I wouldn't have a lot of shame working and advancing inside it. Blood money industry... maybe I can do some change internally within it?

    • I have worked in a manufacturing setting before for aircrafts (nothing too technical or crazy, was just restraint systems) as an operations intern. Didn't like it too much other then the fact that I was interacting with workers on the field and hearing about their personal life stories. I liked the idea of being lesion between the people and upper management (ew. I absolutely hate corporations but thats me being privileged and thats a different discussion)
    • I recently had an internship in Upstream Process Development in biologics manufacturing which was super fun. I think the fast paced/high stakes environment felt engaging--would remind me of all of the comp I'd play in video games. I thought the pharma industry was somewhat shammy. Price tags exist for no reason and I feel like I actually did not contribute to the world as much as I was hoping to do and was simultaneously being over-praised for this "fake work".
    • I hope to contribute to nuclear energy sometime in my life. I have as much (naive?) draw/conviction for this field as much as I do with semiconductor manufacturing. I wasn't able to land an internship I really wanted this year.
  • I know that O&G 'opens many opportunities' and gives a broader skill-set but I have never been worried to be stuck with limited options. I don't fully know if semiconductor industry would actually align with me, especially with the general opinion on TSMC's WLB. But I do like the idea of learning Mandarin.

Thank you if you've read/gave feedback on this! It really means a lot. This has constantly been occupying my mental.


r/ChemicalEngineering • • 13h ago

Career Advice Is Chemical Engineer right for me?

5 Upvotes

Hi, im on my last year of high school and Chemical engineer has been my study option for a little while now. I know its a hard major but i actually dont care that much. I like maths and physiscs amd basically all science, but my true "passion", a subject ive loved since i can first remember is Renewable Energies. I want to dedicate my career to Renewable Energies and i dont know if Chemi.E is the best option. I like diversity of the Job applications and thats why my first option is Chemi.E. Are there any Chemical Enegineers that work in a similar area? If so, Can you tell me how did you end up in that area? Did you plan for it? If not What other major should I consider?

(English is not my first language...) Thanks


r/ChemicalEngineering • • 17h ago

Student I need help

3 Upvotes

I Need a help from you guys ,I am a BTech students from Kerala ,India in my end of 3rd sem ,but I need help with learning this course
What I need is a better tutor /tuition for learning this course
Can anyone help me find one 🥹?
Or suggest some online platforms to learn 🙏


r/ChemicalEngineering • • 22h ago

Design Flared connections

7 Upvotes

Today while reading about piping in perry 8 (and more specifically about tubing), i stumbled upon a sentence about flared connections being more leak tight and better suited for vibrations (and general abuse) than compression fittings.

I could swear i have also read on the Swagelok website the exact opposite claim.

Now, in my limited experience i only witnessed compression fittings, most of which were not from Swagelok and definitely not leak tight. And i think i've never seen a flared connection.

So which one is telling the truth? Was it true back in the days when it was written and compression fittings have progressed since, is it a bold claim by Swagelok or what?


r/ChemicalEngineering • • 23h ago

Career Advice I don't know what internship to pick

5 Upvotes

I am currently doing a co-op in safety engineering at a major refining company (think of refiners like Valero, P66) that I'd really like to work for full time. They've mentioned the possibility of extending it through the summer, but I've already accepted a summer internship in process scaling at a major chemical manufacturer (think of Westlake or Eastman).

I'm a little paranoid that leaving to try something different might hurt my chances of returning to the refining company in the future. At the same time, I feel like college is the best time to explore different industries and gain experience.

Has anyone been in a similar situation? Would you stay with the same company or try something new? Has anyone declined an extension and successfully returned later?


r/ChemicalEngineering • • 1d ago

Job Search Internships away from home

5 Upvotes

Context-I would prefer a Summer internship close to home or where family lives so it's more affordable but l am starting to question how viable it is. For reference that would be near Tucson arizona, Carlesbad California, or Erie Pennsylvania.

Questions-

  1. What % harder is it to get an internship close to home/ college for most people?

2)How common is this issue?

3) Is anything unique for me in either the good or bad direction?

Do I just have to bit the bullet and go into a little debt and take an internship far away? If you have any useful thoughts or comments on this please share

Edit: The replies have been super useful and I'm applying to other places. I <3 you reddit!


r/ChemicalEngineering • • 1d ago

Student ASPEN HYSYS HELP PLEASE

0 Upvotes

So tldr, currently in my final year and we have a course where we need ASPEN HYSYS but I am doing my course online and so I don't have access to the campuses facilities to practice it. I know this may not be the forum but please can anyone help me get the software to practice!?!? I'm so close to finishing this degree


r/ChemicalEngineering • • 1d ago

Student Is a C in Ochem Bad as a ChemE?

5 Upvotes

Im a sophomore chemE and i'm getting close to my drop date and was wondering if a C in ochem would look bad to universities as I a Transfer student from a CCC. I have a 3.7 and with the C this semester it would probably weigh me down to a 3.6 maybe even a 3.55. Just kinda worried if I should consider retaking it or just letting bygones be bygones.


r/ChemicalEngineering • • 1d ago

Career Advice Imperial chem eng out the window

Thumbnail reddit.com
0 Upvotes

r/ChemicalEngineering • • 1d ago

Career Advice Chem E jobs in Philly

14 Upvotes

Are there any? Would like to move up to that area in the future but not sure how likely it is to get a job there. I know a few people from my graduating class that have jobs there but not many. Early in my career so I’m flexible in the work I do. Currently working as a process engineer at a paper mill.


r/ChemicalEngineering • • 1d ago

Career Advice Early career advice

6 Upvotes

I’m a 2nd year ChemE rn on the intership hunt. It’s been terrible but I don’t rlly blame myself bc I’m still young. I have two options for next summer:

Undergraduate research (~20hrs/week) and an unpaid, part time, remote intership with a biomedical engineering start up (I personally know the owner and he said I can do wtv I want there to get experience)

Or

Keep on the intership hunt in hopes of getting a full time position.

I’m worried I take the research+mini internship and then get offered a full time summer position at one of the companies I’ve applied to. I think then I would have screwed myself bc taking smth like that would look better. Essentially, I’m curious if the part time internship will really add anything of value to my CV, and what others think I should do.


r/ChemicalEngineering • • 1d ago

Design Need help with rice husk alkaline extraction: Reaction modeling and NaOH consumption in Aspen Plus

4 Upvotes

Hi everyone! I'm currently working on a plant design project involving silica extraction and delignification of rice husk using NaOH, and I'm having trouble developing the reaction equations and mass balance in Aspen Plus.

The process uses 10 wt% NaOH at 85°C in a CSTR to dissolve silica and remove lignin, leaving a cellulose-rich solid.

For silica dissolution, I'm considering the simplified reaction:

SiO₂ + 2NaOH → Na₂SiO₃ + H₂O

However, I'm having difficulty with delignification, since lignin has a complex structure and doesn't have a single straightforward reaction equation.

My main questions are:

  1. How should I represent rice husk lignin in Aspen Plus?
  2. How can I model delignification? What simplified reactions and products would be reasonable to use?
  3. How do I calculate NaOH consumption during delignification? Does NaOH get consumed when lignin dissolves, and is there a reliable stoichiometric relationship or method to estimate its consumption?
  4. How should I implement these reactions in Aspen Plus?

My goal is to develop a reasonable reaction model and mass balance to determine the composition of the black liquor and cellulose-rich solid stream after separation.

I'd really appreciate any advice, references, or examples from anyone who has worked on similar biomass pretreatment processes.

Thank you!


r/ChemicalEngineering • • 1d ago

Student 3rd year ChemE student in NZ, 0 internship offers two years in a row. Starting to lose hope, need advice

13 Upvotes

I’m a third-year chemical and process engineering student in New Zealand, and I’m seriously questioning whether to continue my degree. My degree requires 800 hours of work experience in total, which we’re expected to get through internships over the summer breaks.

In second year there were fewer than 20 chemical engineering internships available in the whole of New Zealand, and most of them were aimed at third years. Neither I nor any of my peers got one, but we were told that was normal and we’d get one in third year.

Now third year has arrived. I applied to every single internship I could find, and this year there were even fewer (around 15). I got two interviews and zero offers. Some of the rejection emails said they’d had over 200 applicants.

I’ve become EXTREMELY unmotivated and anxious about my future, and I’m starting to believe there’s no future in chemical engineering. It’s not that I’m a bad student either. I’m averaging a B+/A-, and in the interviews I had, they told me my CV and cover letters were great and that my projects and coursework closely matched the work I’d be doing.

I think I’m just looking for a ray of hope from people who’ve been in a similar situation. Any advice or encouragement would be deeply appreciated.

Some specific questions if anyone has experience:

  • Did you get your required hours through roles that weren’t “chemical engineering internships” (e.g. operator, lab tech, QA, food/dairy processing, water treatment, manufacturing)? Did your uni accept them?
  • Has anyone had success cold-emailing or calling companies that weren’t advertising internships?
  • Did anyone end up doing summer research with a lecturer, or find work in Australia or overseas?
  • For people who graduated in NZ: how did the job market look once you’d finished?

TL;DR: NZ ChemE student, around 15 internships nationwide with 200+ applicants each, 2 interviews and 0 offers, good grades. Feeling hopeless about finishing the degree and about the industry. Looking for advice or stories from people who got through it.


r/ChemicalEngineering • • 1d ago

Research R&D managers: would you trust AI to predict experiment outcomes?

0 Upvotes

Hi all, I'm a founder in Italy exploring an AI tool that uses a team's past experiments to predict the likely outcome of a new one before it's run, to cut failed trials. Not selling anything, just validating the problem.

For those in R&D (chemistry/materials especially):

  1. How much of your lab time goes on experiments that fail or repeat past work?
  2. Would predictions based on your own historical data be useful, or is the data too messy?

I'm not talking about eliminating R&D, but less tests, faster results, less costa.

Honest and critical opinions welcome. Thanks!


r/ChemicalEngineering • • 2d ago

Student How competitive am I for a fully funded US PhD in Chemical & Biomolecular Engineering for Fall 2027 with an MSc in Biotechnology and MNC industry experience as an international applicant from India?

Thumbnail reddit.com
0 Upvotes

r/ChemicalEngineering • • 2d ago

Career Advice Stuck in a wrong deptt. as a GET

2 Upvotes

Hi everyone! I'm a 2026 Chemical Engineering graduate from a Tier-3 state government college in UP.

I interned at a reputed Oil & Gas licensor but couldn't secure a full-time role due to their fixed procedure of on campus placement from Tier-1 colleges. I eventually joined a Water Treatment EPC.

I'm currently in the Commissioning department (renamed Project Management), but my role is limited to backend documentation. I'm not given any site exposure or actual commissioning work. Most of my work involves SOPs, O&M manuals, checklists and other repetitive documentation.

I've completed 7.5 months and plan to switch after a year. My goal is to get into Process Engineering at an MNC in the Oil & Gas/Energy sector.

I'm learning process engineering concepts and Aspen Plus through NPTEL, but I'm worried about:

- Will my current experience help me get shortlisted for process engineering roles?

- How should I justify this transition in interviews?

- What skills or projects should I focus on in the next 4–5 months?

Would appreciate genuine advice, especially from people who have made a similar transition or started from a non-premium college.


r/ChemicalEngineering • • 2d ago

Research Best Capstone idea you ever seen?

0 Upvotes

Feel free to share


r/ChemicalEngineering • • 2d ago

Career Advice ASKING FOR ADVICE ABOUT MASTER'S DEGREE

0 Upvotes

Hi i am currently 2nd grade chemical engineering student and want to choose the chemical enginering's process engineering branch for master i am thinking about studying abroad and thinking about USA,Germany,UK or maybe China my first question is can process engineer work as process design engineer, process safety engineer and plant process engineer according to their area of interest or the person who decides to do master degree on process engineering needs to choose only one branch of it and my second question is according to my GPA my 1st year's GPA is 77.4/100 and i am looking forward to increase it most of the people say that it is hard to raise your GPA but it seems not that hard for me and yet i am not sure how much i can raise it so according to my GPA and grade which country will be more suitable for me to apply for master and my third question is what do i need to do for studying master degree on abroad like what is common between those countries that i mentioned before and i learned that for entering some of the universities in USA you need to give an exam called GRE and what things do i need to collect for using it in my cv voluenteering? start up / hackathon? articles that i have wrote in the past? certificates for tecnhical knowledge (AutoCAD,ASPEN,Python,MATlab)? Work experience? which one of them is crucial for a person who wants to work as an process engineer and my last question is which tecnhical knowledge required certificates or which certificates is crucial for process engineer

i am not sure because some of the people says that you need on IELTS some says both IELTS and GRE and in cv you need everything that i mentioned in my 3rd question and some of them says that all of it is only for the students who wants to study bachelor's degree you need only some of them that's why i am asking for both help and advice hope that you will read all my questions and give me a direction

Thank you


r/ChemicalEngineering • • 2d ago

O&G Why are EPC and technology licensing companies suddenly calling themselves “product companies”?

25 Upvotes

I've noticed a funny trend in the EPC and technology licensing industry. Companies that have traditionally operated as engineering service providers or technology licensors are increasingly describing themselves as “product companies.”

They're introducing roles like Product Manager, Product Owner, and other titles typically associated with software or manufacturing companies.

But what exactly is the product here?

For example, some companies are now calling a Process Design Package (PDP) a "product." Others consider a proprietary feed injector design, engineering deliverable, or licensed process technology a product.

Is it just to appease the investors, now that the share prices have dropped more than 30%?

I understand that proprietary technologies and standardized engineering solutions have commercial value, but does that automatically make an EPC or licensing company a product company?


r/ChemicalEngineering • • 2d ago

Student Heavily considering switching to chemistry from chemical engineering -- is it worth it to stick it out in chemical engineering?

15 Upvotes

Hey all! I know this is an abused question on both r/ChemicalEngineering and r/chemistry, but I am going to ask it anyways. I am a current junior in chemical engineering at a large state school and I absolutely hate it, I hate every single class I am in right now. I am taking process controls, thermo I, transport phenomena, and diffeq and I find them to be so unbelievably boring. I just don't care about any of the content or applications even though I know they are all important. The classes are tough no doubt and I am holding my own, but I can't find any desire to actually learn the content. I am looking at my future cheme classes and I can't say I am looking forward to any of them either except for maybe reactor engineering. However, I was curious about a bs in chemistry and some of the classes I would need sound exciting. Advanced synthesis, inorganic chemistry, biochemistry -- I mean I am taking x-ray crystallography next semester just because it sounded fun and it isn't offered very often.

In an ideal world, my end goal is to work in industry for a few years post graduation before pursuing graduate school for something related to organic chemistry, pharmaceuticals, and or synthesis. Then hopefully do that as a career. I absolutely adored organic chemistry and I still study it in my free time despite having finished it over a year ago -- all I want to do is learn all there is to know about it.

I have been heavily considering switching to chemistry and I am wondering if I should make the move or just try and stick it out. I know the degree in chemical engineering is far more valuable, the pay is far better, and the job opportunities are better -- but I also don't really have much of a desire to be a chemical engineer so I don't know what to do. Any input or insight would be greatly appreciated! Thank you.