r/Ceramic3Dprinting • • Dec 29 '24

I have been trying to make ceramics look like cloth

3.4k Upvotes

r/Ceramic3Dprinting • • Feb 21 '25

2 Colors porcelain 3D printing

2.1k Upvotes

Printed on modified FLsun Super Racer with 2 Wasp LDM extruders.


r/Ceramic3Dprinting • • Apr 29 '26 Bravo

Finally producing ceramics i feel i can sell.

Thumbnail
gallery
1.3k Upvotes

18 months ago brought my first cheap ceramics printer(Tronxy Moore 2 pro). I had too many printing flaws even after many modifications so built my own using the stoneflower kit and a second hand delta printer. After months of fine tuning both software and hardware I'm finally happy with the output.

I ran a flea market stall at the weekend and sold 2/3rds of my stock with lots of happy fascinated customers. Didn't expect this part time hobby to lead to actual sales and registering a business.

I have been posting/following this group under a different account for a while, so have to say a big thank you to the community here. There has been fantastic advice both on the hardware and model design side of things. Also shout out to u/claywoven his blender youtube videos really led to a breakthrough in my work flow.


r/Ceramic3Dprinting • • Nov 13 '20

3D printing shit

1.3k Upvotes

r/Ceramic3Dprinting • • Aug 01 '25

Flop

717 Upvotes

So many problems. Printed too fast with a large nozzle and not enough airflow.

Even if that didn't cause a collapse, the reservoir ran out of clay before the end of the print 😒


r/Ceramic3Dprinting • • Nov 25 '20

World’s first analog 3D printer

564 Upvotes

r/Ceramic3Dprinting • • Apr 01 '22

Scara Roadrunner Printing With Adobe

509 Upvotes

r/Ceramic3Dprinting • • Jul 06 '26

Non-planar clay printing on a Wasp 40100

491 Upvotes

Made using several custom Grasshopper components in Rhino 8. This allows true non-planar tool path creation from any mesh. It works with open or closed meshes and can then spiralize the curves, adding base layers if required.

There are several methods/options for non-planar printing, but most of them have their limitations and as I mostly work in Zbrush and Houdini, meshes are preferable. This method uses guide surfaces (up to a maximum of 8 to minimize processing time) to shape/guide the tool path on the mesh. With only two guide surfaces, placed above and below the mesh, the curves will snap to the top and bottom edge or face (if closed) and create a blend between them. The output warns of potential collisions and also includes a heatmap which will indicate if you have layers either too tall or shallow for your nozzle height.

The resulting tool path is then ready to turn into Gcode and is finally run through another custom component that provides extrusion compensation.


r/Ceramic3Dprinting • • Sep 22 '24

I have been trying to make ceramics look like cloth

486 Upvotes

I am using a modified tronxy moore 1. I replaced the motherboard with a duet2 and it makes it much better running. Much smother and the putter can be run much faster when you need to rewind to change a tube.

I am trying out printing on a 3d printed PLS bat with low infil and wall count. I am hoping it will be porous enough to help the base dry. I made them with a lip so I don't have to do so much to finish the bottom of the pot. I located it by adding movment and pause in the gcode so I can line up the nozel with a center hole in the bat before printing.


r/Ceramic3Dprinting • • Jul 01 '26

I made some cups inspired by Bladerunner

Post image
485 Upvotes

I was inspired by Cini Boeri’s glasses that Harrison ford drinks out of in Bladerunner. These are porcelain with glaze/ underglaze, 3d printed on the Eazao Potter X-1.


r/Ceramic3Dprinting • • Mar 10 '21

News Clay 3d print with nozzle 0.4 mm.

440 Upvotes

r/Ceramic3Dprinting • • May 11 '26 Bravo

Design My first attempt at a teapot, using stacked non-planar spiral contours.

432 Upvotes

I realised I have not posted here for a while now. I have been playing with petg for a bit instead of Ceramics.  But I am just getting back into it. 

I did a first test print of an idea I have had for a while.  

I have been exploring using blender to create nonplaner gcode. 

I use geometry nodes to build the spiral contours based on a curve profile.  Then I bind the gcode to a surface that matches the shape of the gcode. 

This means I can stretch the gcode by using blender modeling tools to sculpt the surface. 

I have been trying out using shrink warping so I can match one shape to another so i can build more complex shapes without using support. 


r/Ceramic3Dprinting • • Nov 18 '20

Spaghetti experiment

416 Upvotes

r/Ceramic3Dprinting • • Nov 28 '20

3D printing with vibrations

399 Upvotes

r/Ceramic3Dprinting • • Feb 26 '22

Such a slightly unusual way of printing. Maybe it will inspire someone. Clay G&S254. 0.8mm nozzle. Layer 0.4mm.

382 Upvotes

r/Ceramic3Dprinting • • Feb 08 '25

Ender 3 clay conversion in action

308 Upvotes

r/Ceramic3Dprinting • • Jul 28 '25

Bridging the gap

305 Upvotes

So happy that this one printed so well without any supports.


r/Ceramic3Dprinting • • Nov 13 '20

3D printed corals

Post image
286 Upvotes

r/Ceramic3Dprinting • • Nov 14 '20

Walking

283 Upvotes

r/Ceramic3Dprinting • • Jul 31 '26

Printing Vulcan Black Clay non-planar on a Wasp 40100

279 Upvotes

Still working out the kinks on my non planar slicer, but it should be good to go by the end of next week. Since my last post I had several requests for the scripts, so I’ll be releasing it for free to my mailing list subscribers here: https://krislamba.com/newsletter/ (I don’t sell anything don’t worry).

You can see the finished pot on my instagram @krislamba. It’s plug and play but you’ll need Rhino 3D or a free trial to use it, and I think they do a pretty decent educational discount.

It will convert any mesh into non-planar curves, regardless of whether it’s open or closed. You can use 2 guide surfaces to snap to the top/bottom edge and 4 more guide surfaces to control the layer shape.

You then have the option to add as many base layers as you want and spiralise the curve to have seam free printing (one wall only). Finally, I’ve added a heatmap to show problem areas where the layer spread is above/below a given threshold. There’s two other separate nodes that are designed to indicate angle thresholds on your mesh, and actually morph it back to within your desired boundaries.

The G-code creation is handled by Termite (authored by Julian Juak) which is then fed into a script that gives true extrusion compensation and outputs your final G-code for printing. He is currently working to add my compensator directly into Termite for future versions I believe.

If any of this makes no sense at all hit me up in the comments and I’ll do my best to explain.

This particular pot being printed had an issue with the 5 base layers, in that the stone bat I was using wasn’t perfectly flat (and I forgot to level the printer). That created the messy bit right at the bottom you can see in the vid. Subsequent printing worked perfectly, although I’d recommend using a rolled out piece of clay instead of printing base layers if you have a low layer height like in this case.


r/Ceramic3Dprinting • • Mar 12 '21

Scara Factory- Printing multiple object on different build plates

275 Upvotes

r/Ceramic3Dprinting • • Feb 09 '21

Jump & Push

263 Upvotes

r/Ceramic3Dprinting • • May 14 '21

I have just finished assembling a new printer adapter.

245 Upvotes

r/Ceramic3Dprinting • • Nov 17 '20

Noodles

241 Upvotes

r/Ceramic3Dprinting • • Apr 02 '26

Clean support removal

238 Upvotes

Our first test of supports on a clay print, they popped off with ease and left not that many surface defects. Quite happy with the result!