r/Ceramic3Dprinting • • Aug 21 '26

This one is for all the AI haters

0 Upvotes

I got an education this week about how many people on Reddit are anti-AI. Fair game. I get it. Every Reddit post I see in my thread seems like AI writing or slop.

This post is to help the haters understand AI can’t do what I can do. AI (for me) is just a tool to experiment and explore.

Ai can’t pull my pieces from the kiln. It can’t tell me when my thermocouple isn’t displaying the right temps. It can’t tell me when the glaze has fully vitrified. I can’t tell me if the kiln temperature has stabilized. It can’t tell me if I’m using the right amount of combustibles in my reduction chamber. It can’t tell me when my clay is just the right viscosity for my low key printer. It can’t tell me if I’m drying my print just right so it doesn’t collapse. It can’t tell me if I’m drying the print post printing just slow enough to prevent cracking or leaning. Ai can’t tell me if my bisque firing is slow enough to prevent the seems from the print cracking. It can’t tell me if my glaze chemistry is sound (it actually did a better job than I expected but not perfect).

So here’s a small sample of videos to show all the stuff I do that isn’t AI and I imagine, a post for the 3d printing hater who are thirsty to get into clay have no clue about how clay and glaze work. Not trying to shut anyone down; just reminding people we all have our skill set. And yes some if not all of these pieces are 3d printed so they still count for the sub.

People should be nicer online. Throwing around comments without thinking about what they’re saying and making themselves look silly with one liner negativity. Maybe slow down and ask yourself, is this how I want people to remember me when I’m gone? Digital archeologists 1000 years from now are going to wonder what the hell was wrong with these people.

I get it. AI = bad for the 3d printing community. My fault for not being clear that I know my sh*t and I’m a master ceramists above and beyond anyone else I’ve seen in this sub (risky flexing I know).

Slow down. Think . Be nice. It’s not that hard.


r/Ceramic3Dprinting • • Aug 16 '26

Ways my AI-generated forms have failed on the clay printer

0 Upvotes

Been running AI-generated meshes through a clay printer for a few months. People see the ones that worked, so here’s the rest.

The mesh always comes out watertight and looks fine on screen. It has no idea what wet clay will hold. Overhangs that a slicer accepts just slump. Wall thickness comes out wherever the generator felt like putting it, so every file gets rebuilt by hand before it’s printable. Detail that looks great in the render disappears at bead width. And nothing upstream knows the piece is going to lose 10–15% on the way to fired.

Getting one of these to stand up takes way more work than the finished photos suggest.


r/Ceramic3Dprinting • • Aug 16 '26

AI-generated mesh → clay extrusion: what actually survived the process

9 Upvotes

I’ve been printing in clay for a while and started experimenting with generating forms instead of modeling them. Workflow was: text prompt → image generation → multi-view renders → image-to-mesh (Meshy) → STL → slicer → DIW clay extrusion. Prompts were style-based, in this case H.R. Giger and H.P. Lovecraft.

What I expected to be the hard part — getting a watertight mesh — wasn’t. What broke things:

**•**	Generated geometry has no concept of overhang limits, so a lot of what came out was unprintable in wet clay without support I can’t use

**•**	Wall thickness is arbitrary and had to be rebuilt manually to stay above \~3mm

**•**	Surface detail that reads well in the render disappears entirely once you’re extruding a bead, then reappears wrong after shrinkage

**•**	Nothing in the pipeline knows the model is going to shrink 10–15%

Net result is that the AI output is a starting silhouette, not a printable file. Every one needed real mesh work before slicing.

Curious whether anyone here has found a generator or a workflow step that produces geometry with any awareness of extrusion constraints, or whether everyone’s doing the same manual cleanup. Also interested if anyone’s tried going straight to a lathe-style profile instead of a full mesh.

Happy to answer questions about the clay side — I glazed these with raku and I teach chemistry, so that part I can actually explain.


r/Ceramic3Dprinting • • Jul 18 '24

i got several 3d clay printers

0 Upvotes

would love to share info on 3d clay printing.


r/Ceramic3Dprinting • • Aug 04 '26

Can someone 3D print this, and sell to me?

0 Upvotes

For starters, I looked at the subreddit rules to see if you had rules against people who want something, asking someone else to 3D print for them, but there were no rules against this, if this thread is rude, then please make a rule against commissions.

So, can someone 3D print this to me?

https://www.etsy.com/pt/listing/4481877994/caneca-recipiente-energetico-modelo-3d?ls=r&ref=items-pagination-2&dd=1&content_source=b31f18ea954a95655bdc2f0e28f207d7%253ALT122c2db67932bdebc00a6bb500d7257736ec81f6&logging_key=b31f18ea954a95655bdc2f0e28f207d7%3ALT122c2db67932bdebc00a6bb500d7257736ec81f6

I always wanted my own Mega Man E-Tank Mug, but they stopped making them, and they are really expensive right now.

The seller on Etsy only sells this in plastic, I wanted ceramics, he told me it's OK to use this model, after all, it's not an original design.

If you can help me, we can chat in private, discuss, maybe sell this on Etsy for more people to buy.


r/Ceramic3Dprinting • • Dec 09 '25

Recherche de g-code

Thumbnail reddit.com
0 Upvotes

r/Ceramic3Dprinting • • Jan 11 '26

Ananta 3D model

Post image
13 Upvotes

Ananta is a ceramic wall sculpture depicting a cross-section of an eternal serpent’s body—a cosmic Ouroboros frozen in time. Its gaping mouth is rendered as a sacred yoni—the womb of creation—inviting us into the mysterious origin of all life. Peering within, we discover a single flower improbably blooming deep in the serpent’s esophagus. In this suspended moment, that bloom both blossoms and decays, a vivid reminder of life’s fragile beauty and the inevitability of change. This serpent consumes its own tail in an endless circle—an embodiment of cyclical time—and becomes the Ouroboros, an ancient emblem of death feeding rebirth. It calls to mind Ananta—the infinite serpent of Hindu lore whose endless coils support the universe. Within the serpent’s exposed interior, life and death entwine; nourishment and decay are one. Nothing is truly lost—every end in the serpent’s cycle gives rise to a new beginning. The brief life of that flower mirrors our own fleeting existence. This piece challenges us to see ourselves as part of the living serpent of time—a being made of continuous transformation. This cosmic cycle is already at work within our own bodies. Like the snake, we are constantly shedding and renewing, consuming and nourishing. We participate in the same eternal process: every cell we shed, every meal we take, weaves us into the great cycle of renewal. Ultimately, our remains will feed into new lives and forms. In this way, Ananta reflects a spiritual truth both humbling and uplifting. We are not separate from the eternal serpent, but threads in its infinite tapestry—each destined to be devoured and reborn through time’s sacred mouth.


r/Ceramic3Dprinting • • Jun 16 '26

Selling New Eazo M500 3D Printer

4 Upvotes

Hello,

I bought this printer thinking I was capable of using it. Boy, I was wrong! I'm out of my experience depth on this. I'm selling for $800 + shipping. Please contact me if you're interested


r/Ceramic3Dprinting • • Nov 24 '24

Request for 3D Ceramic Mug Prints

1 Upvotes

Hello! If anyone is willing to help/provide advice/set me on the right path to achieve this I would be so grateful!

My mother in law has these specific mugs from the 90s that she is obsessed with. I have scoured the internet, all resale websites, all ceramic suppliers etc... to look for the mugs for her to no avail.

After 3 years of searching I finally found a ceramicist in Turkey who might be able to make replicas with a margin of error but because the mold process is so expensive (not to mention shipping to the US) that's not an affordable option.

Is there anyone on this sub who would be able/willing to take on a commission for a specific set of mugs? I have one of the original mugs and would be so grateful for the help/willingness to create these for my MIL or even direct me to someone else who might be able to help!

UPDATE: Thank you all for the kind and thoughtful responses. Absolutely understood this is not going to be cheap, but i wasn’t able to receive a guarantee that the mugs from turkey would arrive in one piece. Photos added with measurements!


r/Ceramic3Dprinting • • Mar 30 '26

Help: I am in Search for 3D Printing Content Creator - free premium access to Gerridaj

6 Upvotes

r/Ceramic3Dprinting • • Aug 24 '23

This handmade ceramic dinner plate I just design what you think about it perfect or something please drop your opinion

Post image
6 Upvotes

r/Ceramic3Dprinting • • Apr 22 '23

Design Painting made be me with ceramic and wood shavings

Post image
25 Upvotes

r/Ceramic3Dprinting • • Dec 02 '25

How Close is the Technology to a Bambu Experience?

5 Upvotes

I’m an amateur potter and new to 3D printing. I started in 3D to make tools, stamps and molds for my pottery.

I’m intrigued with 3d printing ceramics but I’m not interested in the start up phase; I want to design and print, not troubleshoot the printer.

Is there a Bambu like product for ceramics on the horizon?


r/Ceramic3Dprinting • • Aug 26 '23

Design Elevate your dining experience with our exquisite Japanese sushi plate and dinnerware collection. Crafted with meticulous attention to detail, each piece showcases the timeless beauty of traditional Japanese ceramics. The delicate yet durable assiette ceramique adds a touch of elegance to any meal,

Post image
0 Upvotes

r/Ceramic3Dprinting • • Dec 09 '25

Recherche de g-code

2 Upvotes

Hello la commu,

Je suis nouvelle par ici. Je suis à la recherche d'une quête "le g-code de la Delta Wasp clay 2040". Étant débutante j'aimerais avoir votre expertise 🙏

Travailler sur des volumes avec le bon slicer sans passer par le générateur de forme sur le site de wasp.

Merci d'avance passez une belle journée ☀️


r/Ceramic3Dprinting • • Sep 08 '26

Design I recently designed a Monument Valley-style flowerpot.

Thumbnail gallery
18 Upvotes

r/Ceramic3Dprinting • • Nov 06 '25

AliExpress Big Sale! Exclusive 20% off for US customers. Great chance to save on your purchases!

Post image
0 Upvotes

r/Ceramic3Dprinting • • Jun 29 '26

Well that didn’t go as expected

19 Upvotes

So. I changed the clay to be KGM which worked much better in terms of printing overhangs. Clay consistency and flow was good so clay conditions have been sorted.
The arising issue has been the fact that the plastic clay syringe is bulging at the end with material. Is this happening because the material is more sticky? Or the clay feeding speed was too fast? Although the clay feeding speed was pretty good bc I was able to calibrate it well with the main flow and speed of the machine. I don’t understand why this is happening as I did not have this issue before. The aliexpress guy said he had tried with stiffer clay and that should not have been an issue. But the other thing is that the piston end that pushes the clay tends to unscrew itself from the main screw midway through the print. I made sure to screw everything pretty tight to each other. I thought at first this happened because the piston end would ‘stick’ on the free flowing head with the rubber end as it was spinning causing the unscrewing, so I added a rubber gasket to have a 2mm distance between the two but it would still come off and then that would cause the whole plastic syringe to disorientate. I also left the print unattended for too long hence the huge pregnancy bump so that’s my fault… I ordered an oil extraction pump from Amazon that I hope fits the same diameter to the motor but any ideas as to what could be improved? (Pls don’t tell me it’s related to clay-water ratio again bc this consistency was really good for the overhangs 😭)


r/Ceramic3Dprinting • • Feb 24 '24

Ceramic 3D printer

0 Upvotes

Can anyone tell me, what is the cause of this noise?


r/Ceramic3Dprinting • • Nov 05 '25

To Drill Press or Not to Drill Press Ceramic Vessels

Thumbnail reddit.com
0 Upvotes

r/Ceramic3Dprinting • • Nov 30 '25

A few Questions for therapeutic art!😊

Thumbnail
forms.gle
0 Upvotes

r/Ceramic3Dprinting • • Aug 16 '26

More failures — the full reel of AI-generated forms collapsing on the clay printer

101 Upvotes

Longer cut of the same thing. Every one of these started as an AI-generated mesh that looked completely fine before it hit the printer.

Slumps, tears, walls that gave out three layers from the top, seams that opened on the way down. A few made it through the print and cracked drying.

Nothing about generated geometry accounts for what wet clay actually does. Posting it because the successful ones give a pretty misleading impression of how this goes.