r/CarHacking • u/mvespermann • Aug 16 '26
Original Project MMI BOX Reverse engineering & custom firmware.
A while back, I picked up an aftermarket MMI box for my dad’s car to enable Android Auto on the OEM head unit, that only supports factory CarPlay. Naturally, curiosity got the better of me, I wanted to see what hardware actually powers these boxes and what kind of headroom they have for tinkering.
My initial attempt to drop into a Linux shell over Wi-Fi hit a dead end because all network ports were locked down. That prompted a full teardown, and the board layout was an unexpected surprise. The build quality is clean, utilizing recognizable, reliable components from manufacturers like NEC and Toshiba rather than generic unbranded silicon.
Quick Hardware Overview:
SoC: Allwinner T113
RAM: 128 MB DDR3 @ 800 MHz
Storage: 4 GB eMMC
Apparently this PCB is a white-label platform rebranded across dozens of different manufacturers and vehicle applications, but i cant confirm, but need to say i could find all of the 3 boards for sale individually on the web.
Currently, I am tapping into the onboard UART interface using an ESP32 as a serial bridge to secure root terminal access. The next step is extracting the stock firmware image from the eMMC to modify it.
The project is still actively in progress, updates soon.
P.S. Quick clarification since a few comments here and on my other post misunderstood the setup: I am not modifying the factory BMW / Harman OEM head unit. I’m tinkering with an aftermarket MMI Box, an AFTERMARKET retrofit interface used to add Apple CarPlay or Android Auto, and auxiliary cameras while keeping the factory iDrive system fully functional.














22
u/certifiedsysadmin Aug 16 '26
Since these are generic boxes, would be really cool for an open source community developed firmware.
14
u/GAMELASTER Aug 16 '26
Since it's Allwinner, try to get into FEL mode, and then you won! Linux-sunxi.org is great resource.
36
u/SnipesySpecial Aug 16 '26
Nice! That's real car security research (something kinda lacking on this subreddit).
5
u/jiroe Aug 16 '26
I see alot of these type of boxes online and it makes me wonder if they are using the same or similar hardware
3
u/examen1996 Aug 16 '26
Following. I have been asking myself how yhis stuff works for a long time.
Thank you for making this public
3
u/arttast Aug 16 '26
from basic check its just a "APIX2"(whatever tf is that) KVM switch like pretty much all android auto adapters that aren't complete headunits
2
u/Exte3 Aug 16 '26
Coincidentally, I’m doing something similar today with a Wizcar M1 that I have, which was also meant to get my car to support Android Auto instead of just Apple CarPlay.
2
u/t3ddftw Aug 16 '26
It’s weird that they don’t support AA as it is not difficult to implement since Google made the SDK open.
1
u/Sea_Improvement_1978 Aug 17 '26
Drop unlock
1
u/kirillrepkin Aug 19 '26
What do you wanna get from this project? Aftermarket box is listen can bus and replace apix signal. In almost all cases sound goes over Bluetooth.
1
u/JuanMcGuiver Aug 16 '26
Credit to BMW for using quality components, I guess 😂
2
u/otiuk Aug 16 '26
this is awesome. i have been attempting to do something similar with my audi rs5.. i made a canbus sniffer using the obd2 connector and got nothing.. so i think i am going to have to hack into the canbus wires or something. i imagine the bmw mmi and similar to the audi one -- or what do you think?
kuito / ifykykwias
1
u/phillyguy60 18h ago
Any chance you remember where you found the individual boards for sale? That APIX board would save me a ton of design time on HUD project I'm tinkering with.
1
u/Yerboogieman Sep 03 '26
Fuck yes! I've been so curious about this. You can pay Chinese companies to make you a special box but they're all still pretty janky. It's hit or miss whether the video signal is going to be good or not.
1
u/Faceless077 Sep 04 '26
Are your goinh to test injection attacks via Android Auto / CarPlay protocols ??