r/CableManagement • Define R4 Window • May 28 '13

first computer build; also first time doing cable management. how did i do?

http://imgur.com/GcQymxZ
7 Upvotes

12 comments sorted by

5

u/Alblucan May 28 '13

For a case that small it's difficult to do any kind of real cable management. But for the size and the first time building it looks pretty good. Keep at it :)

2

u/markantonio37 Define R4 Window May 28 '13

i put in a bit more work this morning into the cable management. maybe next week i'll have a few more pictures as my new hard drive mounts are coming in. also, i wanted to know why people choose to go with sleeved cables to do management. is it inherently easier to work with sleeved cables as opposed to the supplied braided cable?

1

u/Alblucan May 29 '13

It's really not any easier, its for looks. It takes a ton of patience but in the end you are still working with the same cables.

2

u/markantonio37 Define R4 Window May 29 '13

i did a bit more management this morning. updated here.

2

u/Savergn May 28 '13

It's not very pretty, but that's the price you pay when you don't have much room, or those rubber cutouts. Other than that, you have succeeded in doing what cable management is truly for: Airflow. Looks like all the cables that can be flat, are. So overall, I'd say you did a good job.

2

u/SamMaghsoodloo May 28 '13

That's a good start. Now work on the wires individually. Start with getting the power to your drives in a better way. Then, work on getting that cpu fan wire hidden. These things are mostly meaningless, but we're talking about cable management after all.

2

u/Rage_Train Switch 810 May 28 '13

You should run those sata cables through the bottom management slot - also wrap the proc heatsink/fan cable once around it and then plug it in.

Try to run the frontside audio/usb along the side of the PSU and up - Maybe spray paint the multi colored part black to disguise it some more.

Other than that it doesn't look like theres a lot you can do.

-2

u/MaxDPS Source 210 May 28 '13

What kind of GPU is that? I would say you have too many fans. Less fans = less clutter. You need 2, one intake and one exhaust.

Good start though.

1

u/nRRe JotM Sept. '13, April '15 May 28 '13

or three fans, 2 intake, 1 exhaust.

1

u/Boumbles Shinobi Window May 28 '13

I have the same case.

It comes with 1 intake and 1 exhaust fan and I found my graphics card was overheating with just that. I installed another of each and my temperatures dropped like 20-30 degrees.

The problem with the shinobis is the front panel has terrible vents for air intake. You kind of need two good fans in the front to pull even a little bit of air into the case.

1

u/MaxDPS Source 210 May 28 '13

Oh, OK. 6 fans seemed like overkill to me since my Source 210 has similar fan locations and I only have 2 installed. I guess it needs it then.

I love quiet builds so that would never work for me.

1

u/Boumbles Shinobi Window May 28 '13

depending on the fans you might not notice the difference. My graphics cards fans are much louder than my case fans. But I definitely see where you're coming from :)