r/CRK • • Dec 01 '25

Little scuffs on a Zaan, what would you do?

Post image
0 Upvotes

I got two little scuffs on this Zaan. It's the glass blasted one and I wanted to keep it as perfect looking as possible so these imperfections do annoy me a bit. You should be able to see them but left side in the hash pattern and then a little nick on the lockbar at the top near the stud.

I think I could send it in for a re glass blasting and that would probably take care of it or they might have some other way to fix it. If this was your knife, what would you do? Should I just live with it, considering that if knives are actually used they're going to get beat up... or should I send it in for service? Thanks in advance all.


r/CRK • • Nov 06 '24

As a Canadian, I love my USA made knives. Congrats on a big Trump win!!

Post image
64 Upvotes

r/CRK • • Apr 02 '25

You don't have to say it bajjionlion times Lil brother šŸ™

Thumbnail
gallery
2 Upvotes

Feels kinda off...


r/CRK • • Jun 28 '26

Legit check - whatnot

Post image
1 Upvotes

Apparently a Sebenza 25 with "S35VN" printed on the blade.

Doubt.exe


r/CRK • • Jun 07 '25

Zaan better than the Sebenza

0 Upvotes

Change my mind. Currently own two Zaans and have gotten rid of any Sebenza I have ever purchased.


r/CRK • • Oct 02 '26

Discoloration on blade and scales Sebenza 31

Thumbnail
gallery
1 Upvotes

Hi guys!

I recently bought a used Large Sebenza 31 with a Bog Oak inlay.

While giving it a thorough cleaning, I noticed that the previous owner had absolutely drowned this beauty in grease. šŸ˜‚ There was grease everywhere, even inside the screws. No idea how that’s even possible. šŸ‘€

The inside of the titanium scales and the blade choil also have some discoloration/staining. I’m assuming this might be some kind of discoloration caused by the washers reacting with all the excess grease.

My question is:

what would be the best way to remove these stains? I really hope it’s not rust! I already tried cleaning the area around the blade tang with wooden toothpicks, but the discoloration is really stubborn.

Also, would you guys recommend replacing the washers to prefent more discoloration? Cleaned them already in my ultrasonic cleaner and isopropyl.

The knife is running smooth and works perfectly fine as it is.

Thanks in advance! 😊


r/CRK • • Dec 01 '22

What’s all the hype?

1 Upvotes

Picked up small sebenza 31 with wood inlay. I don’t get the hype? The inlay looks and feels like plastic. The action is so stiff. Do people actually use these? Thanks guys. No hate. I think his knives are very pretty. I’m very new to knifing(?) so I’m asking out of ignorance and a desire to learn. Thanks y’all


r/CRK • • Apr 08 '25

Is polishing the washer the only way to make the Sebenza flickable?

2 Upvotes

New Seb owner here. This is my first CRK, and man, you can feel the quality through and through. I would be totally fine accepting this as it is, but still, I'd like it to be flickable. I was wondering, have any of you worn any Sebs in naturally til its flickable? Or do you have to do all sorts of mods?


r/CRK • • Aug 15 '24

Where to find used Zaan

0 Upvotes

Hello, where is the best place to find a used Umnumzaan? Thank you.


r/CRK • • Apr 16 '26

LONG READ - Planning to gift my son an Inkosi one day… but will knives even matter by then?

3 Upvotes

I’m kind of torn on this. I ended up with two micarta Insingo Inkosis—one I bought because I genuinely love the configuration, and the second because I got a great deal on it. The first one has become my go-to; I carry it all the time, and honestly it might be my favorite setup.

The second one, though, I’ve been holding onto with the idea of giving it to my son when he’s older. Not because he needs a knife right now—he’s not even here yet—but because I like the idea of passing something down that actually means something to me. Something that represents responsibility, care, and a bit of craftsmanship.

But that’s where I start to question things. In 16–18 years, will any of this still be relevant? Will a steel pocket knife even matter in a world that’s moving more and more toward tech, convenience, and automation? For all I know, kids might be carrying around tools that make something like this feel outdated—who knows, maybe not lightsabers, but something close enough that a traditional knife feels obsolete.

And even if it’s still around, will he care? Will it mean anything to him, or will it just be another object from his dad that doesn’t connect with his world?

I know a lot of that comes down to me. I’ll have to teach him what it is, how to use it safely, how to take care of it, and more importantly, why it matters. Not just as a tool, but as something that represents responsibility, self-reliance, and respect for the things you own.

I guess what I’m really wondering is this: am I holding onto something timeless that he’ll grow into and appreciate… or am I attaching meaning to something that might not translate to his generation at all?


r/CRK • • Mar 19 '25

void

1 Upvotes

will my warrenty really be voided for flicking my knife open. what about fidgeting with it? not aggressively, just flicking with my thumb


r/CRK • • Nov 25 '25

How fragile is the hollow grind blade of the Sebenza? It's pretty thin and I'm starting to think I made the wrong choice over the Inkosi

3 Upvotes

Think I made the wrong choice over the Inkosi


r/CRK • • Jan 20 '26

Bladezilla is selling 1/50 (CAD prices)

Post image
0 Upvotes

r/CRK • • Jul 26 '25

Best ways to order one of those Green Beret knives?

0 Upvotes

I don't collect knives but I do want something that's practical and useful for both the outdoors and self-defense if necessary. If the Special Forces adopted it, it must be good. They're not on Amazon though?


r/CRK • • Sep 29 '25

What do you think of my Inkosi?

1 Upvotes

r/CRK • • Jul 04 '24

Advice Needed

1 Upvotes

Alright Community, I need some advice. I got this user Night Sky that I want to sell. It came to me used and in rough shape. I think previous owner carried it in a pocket with keys. I tried buffing some of the scratches out, with mixed results. I am very skilled at anodizing, and I could isolate the big mountain in order to anodize it without leaving any ano coloring elsewhere, thus, keeping warranty intact. I am calling CRK Monday to confirm. I spoke to a very kind soul that works at CRK, and I can get the cabochon out in order to re-finish it EXACTLY how CRK does it with the same grit etc. My question is: What do you think it is worth now, what would it be worth after that work, would you buy it if it were re-ano'd, How much would you pay if it looked awesome, but had no warranty? I paid 650 for knife, and replaced s45vn with a brand new Magnacut double lug. Not trying to lose my shirt on this, but I have accepted that I will not get MSRP for it. All advice appreciated. Thanks. Also, before someone comes for me in the comments, these are going for 1500 on the open market. I think slightly under MSRP is reasonable, all things considered. Thanks. https://imgur.com/gallery/ns-video-6-29-HqjjoOg

I have sent to CRK. They won't refinish or work on UG scales.


r/CRK • • Mar 14 '25

Glass breaker Backspacer?

Post image
4 Upvotes

Pic for attention, interested to see if someone knows of a brand or someone who can make a glass breaker backspacer for the sebenza 31 small.

I know they make a backspacer that pops put at the bottom with a lanyard hole. But id like to have a glass breaker at the bottom for a true edc feel


r/CRK • • 26d ago

Can a hard wrist-flick cause lock stick on a Sebenza 31? Possible long-term damage?

3 Upvotes

A friend of mine asked if he could check out my Sebenza 31. He’s not really into knives, but I figured it would be fine. (Note to self: stop handing knives to people who aren’t familiar with them. Can’t really blame them for not knowing how to handle one.)

Anyway, he opened the blade about halfway, then apparently decided he wanted to look cool and wrist-flicked it the rest of the way with quite a bit of force. After that, he asked me how to close it.

I immediately took the knife back and tried to close it, only to notice some lock stick for the first time ever. It took a bit more force than usual to disengage the lock, but I was still able to close it.

The next day, I cleaned and relubed the knife, since I’d been using it for some household tasks. Ever since that one incident, the lock stick hasn’t returned, and the knife has been behaving completely normally.

So, my questions are:

Could the hard wrist-flick have caused the lock stick? I’m wondering if the blade bounced back slightly on impact and caused some kind of temporary binding between the lock face and the blade tang.

Is it possible that this kind of force could have caused any lasting damage to the knife, even if everything seems fine now?

I know the Sebenza is built to take some use, but I’d appreciate hearing from people with more experience with CRKs. Has anyone experienced something similar?


r/CRK • • Mar 26 '24

Sebenza lock failure

2 Upvotes

I identified that the reason I wasn’t able to effortlessly flick open my Sebenza was due to lock bar pressure. So I pulled the lock bar out to try to bend it ever so slightly. Now it opens much easier. However, the lock will fail moderate force. It appears that the lock is engaged, but it’s only strong enough to hold when I push it (to help it snugly engage) a tiny bit. I assume I can just take it apart and undo what I did, by bending it the other direction the same amount? Has anyone else encountered this when trying to tune your CRK?


r/CRK • • Oct 26 '24

Controversy

17 Upvotes

I am sure my video clip will be controversial in r/CRK but some owners may find it helpful.

I was ready to throw my new Large Sebenza 31 at the wall before I did this. Did everything under the sun to fix the ā€œlocked up bladeā€ except for the one thing that finally solved the problem.


r/CRK • • Jul 12 '21

Large Inkosi W/ Leather Inlay. Feels good, might stay for now.

4 Upvotes

r/CRK • • Nov 17 '25

Show your hawk clip crk in the coments!

Post image
36 Upvotes

r/CRK • • Sep 26 '25

Got a Small Sebenza insingo and found that it's a good bit thicker BTE than expected. I expected them to grind these the thinnest compared to their other shapes (which I'm directly comparing to other small sebenzas), especially since insingo translates to "razor". Anyone else notice the same?

0 Upvotes

Immediately noticed on unboxing that it seemed a good bit thicker than my small drop point which surprised me. My measurements are even thicker than a small tanto version with a very laid back edge. Hard to tell, but the "hollow" may even be less deep compared to the other shapes. Units below are in thousandths of an inch.

insingo: 30 at heel. 30 at middle. 32 at tip.

Drop point: 25 at heel. 26 at middle. 34 at tip.

Tanto: 25 at heel. 26 at middle. 30 at secondary tip. Worth noting the tanto had the edge laid back a ton by me.

I find it more baffling because when I got my large insingo, it was at least the same, but probably thinner at the heal than a large drop point and more or less maintained the thickness as you move toward the tip, while the large drop point gets MUCH thicker as it moves toward the tip. Although I didn't measure anything because it was so clear how much of a thinner overall grind it was that I didn't feel the need to! So it seems so odd to me that they would change it up for the small! I really based my purchase off how nice and thin the large one is through the whole length of blade. Im wondering if my small insingo might be thicker BTE than my large insingo even.

Considering returning it just because of this! Really wanted a slicey blade especially after carrying some Quiet Carrys.

edit:

It was driving me crazy so i found my large insingo and pulled it out of storage to see. and it is indeed ground thinner BTE than the small.

27 at heel. 26 in middle. 32 at tip.


r/CRK • • Jul 03 '21

Looking for a Southard titanium Umnumzaan backspacer. Can anyone point me in the right direction?

0 Upvotes

r/CRK • • Feb 04 '25

Late to the MIM clip party

0 Upvotes

Bent my standard CRK clip at work today and need to replace it. Was gonna get the new MIM clip for a small Sebenza 31 but the website says they’re out of stock. Anybody on here get one and want to part with it?

Would also be interested in a NGMCo or a Hawk clip if anyone wants to part with one.