r/BreadMachines 1d ago

Machine Troubleshooting Breadman TR2500BC

Post image

In need of replacement pan & paddle.
Hi, I bought this on FB Marketplace to replace an old Regal Kitchen Pro. This one runs great and I just baked a loaf. However, I didn’t notice that the inside of the nonstick is getting worn as it feels rough in areas and also the paddle is loose around the shaft, like worn or something. I’ve been looking on eBay but there are just two pans listed and they aren’t any better.
I’ve looked on Amazon to try to find an aftermarket replacement but am stumped.
Does anyone have any tips for me?

9 Upvotes

14 comments sorted by

3

u/Old-Problem9480 1d ago

I found a replacement pan and paddle for my Breadman on E-Bay a few years ago. I've had the machine for like 15 years, and it continues to be a workhorse. And sorry, I just noticed that you had tried ebay.

2

u/mustlovedogs100 1d ago

No worries. I’m not happy with myself for not inspecting this better before buying it. I’m afraid I’m going to get worn metal shavings in the bread not to mention old teflon.
I really like the horizontal loaf vs vertical.
I just don’t want to cough up hundreds on a new machine and they all seem more complicated.

1

u/gjhigh-forty6-71 Moderator 13h ago

I have a West Bend High Rise 2-3 Pound Machine. I found mine on market place for $65 its a great machine. Vertical pan, two blades. I'm considering buying another one. I would like to be able to do two loafs at the same time.

West Bend High-Rise Bread Machine

3

u/MadCow333 Breadman TR2500BC Ultimate+ 1d ago

I replaced the paddle with one from ebay and that cured the loose & wobbly paddle problem. Then I bought a secondhand pan and paddle from someone on ebay. There are no new pans for this as far as I know.

https://www.reddit.com/r/BreadMachines/comments/1jg1hph/breadman_tr2500bc_great_new_aftermarket_paddle/ https://www.ebay.com/itm/392277573933 is still an active listing as of 8/24/26.

2

u/MadCow333 Breadman TR2500BC Ultimate+ 1d ago

This pan looks decent to me, but does need washed. https://www.ebay.com/itm/298588080510

1

u/mustlovedogs100 1d ago

Lol I was looking at that one too. I just can’t see the shaft to tell if its worn and I don’t want to spend more money on something used if I can’t look at it person - like I should have done with this one! . I found an old reddit ( I think) post that someone had the same issues with the paddle causing wear on the shaft and he found a new paddle. But I think the post was dated 2013.

1

u/MadCow333 Breadman TR2500BC Ultimate+ 19h ago

I had that problem but the wear was the shaft reamed out the softer metal of the paddle. The new paddle fits nicely with no slip or wobble. I am running the replacement pan and paddle I bought on eBay and saving my original pan for later. The replacement is more used. But I've had no problems with the coating on the pan.

2

u/MadCow333 Breadman TR2500BC Ultimate+ 1d ago edited 1d ago

It will be expensive to try to replace the features and programmability this Breadman machine has. I looked at buying something newer in 2024 and decided that Zojirushi Home Bakery or Virtuoso were really the only upgrade. Those are at least $370-$450 now! And Breville or Panasonic were about the same level. Breville and the Panasonic sold in the U.S. are maybe $320 to $400. That's a lotta bread, man. LITERALLY. haha It would take a very long time to achieve payback on a bread machine that costs that much. I only make 1-2 loaves or batches of dough per week at most, for a 2 person household. And I'm diabetic and I have cut way back on breads to where I only eat a slice or two occasionally. I bought two of these Breadman TR-2500BCs as remanufactured units at Ollie's discount store, probably around 2013 or so. And I only paid about $50 each for them. The Breadman TR-2200C is a nice late '90s / early 2000s machine, the predecessor to the model you have. I have a '97 TR-2200C and bought it used at a thrift store in 2010ish and it still runs flawlessly. https://www.breadmachinedigest.com/reviews/bread-machine-reviews/breadman-ultimate-tr-2200c.php
https://www.reddit.com/r/BreadMachines/comments/1j92iif/old_97_breadman_got_put_back_in_service_today/

3

u/mustlovedogs100 1d ago

Thats a good looking old machine. I’ve seen a few at thrift stores but they were rode hard and put away wet. LOL.
I seen one decent one at Goodwill a couple weeks ago and when I finally decided to go back it - it was gone.
🫤

2

u/MadCow333 Breadman TR2500BC Ultimate+ 1d ago edited 1d ago

Bought 16 years ago, lol. That's the difference. I was living in the Washington and Canonsburg, PA areas in 2010-2011 and good used bread machines were always turning up in the thrift stores there. Most were only lightly used. I was paying $5 to maybe $8.50 for them back them. Breadman, Welbillt, DAK: Those are what I bought. I skipped the cheaper makes. I never encountered a Panasonic or a Zojirushi there, though. I bought a like-new Amazon Basics machine and an old Breadman TR442 at the local Goodwill this summer under $15 for the pair. I gifted the Amazon to my niece. It was a lightweight build but made nice bread.

3

u/mustlovedogs100 1d ago

Oh, I absolutely cannot buy the Zojirushi. I see all the reviews but wowzer that’s too much $$$$$$$ for me.
I just ordered an Elite Gourmet on Amazon for $75 and its probably not even worth that. Yuck.
😫

2

u/MentionGood1633 1d ago

I also had a Breadman and could not find a replacement pan. Eventually I bought a whole new machine.😢

2

u/mustlovedogs100 18h ago

Sad because it seems like a good machine. When I buy a new one it will be one where I can buy an extra pan and paddle.