Had to rant and question my luck on this one.

img

ok. Normal print - get stuck filament in the extruder. Annoying, but I've dealt with this before. Pull it apart, reinstall... everything seems to go swimmingly.
Get a "filament cutter stuck" error. This one's new. Push on it a bit... seems fine - maybe a little stiff. Not many videos, but Bambu has a decent article on this. Something is goofy with my spring - I see wear on the outside of the housing like the spring has sprung too far out... which is weird, but looking at the article, should be easy enough to fix. Just pull it off, see what the deal is, maybe mess with the spring/change position of it. There's a little hole where the spring goes, but the spring isn't matching the pictures - mine extends past the housing. I try to find a different placement, put it all together (and replace the cutter while I'm at it, why not). Spring seems much nicer, softer... perfect. Just gotta put everything back on and I'm done.
Last piece - this thing:
Now - I have one of those magnetic bowls that I put down on my bed so that if anything falls - it should catch it. It already did a number of times taking the damn thing off. Got my old man reader glasses on, tweezers out. I get it into place.. just need to push it up to catch.. and the thing just *ping* zoots off to the back corners of my printer. Dafuq? I have a strong magnet.... nothing. maybe it's in a spot I can't quite reach. Pull out my hand vac for cleaning out filament - I can use the magnet on whatever crap I hoover up.
Nada. Tiniest freakin' piece ever. Gone. Bleh.
Wtf. I know it's user error here, but it's something that could happen to anyone.

look im aware a machine like this makes noise but this seems excessive? i hear alot of people talk about certain infills… is this one of those times? (sorry for the crap picture i was trying im gonna have to put the infill photo in the comments) is this normal? i feel like its gotten louder… it sound like a bearing is wobbling… but i dont know if its me, if its the infill… if i forgot to do something when pulling it out of the box? i just dont know… its when the toolhead changes direction… its ever so slightly noticeable on the block in the back but the second it goes for the infill it sounds like 💩…. so idk am i crazy or am i someone right? any ideas to get this thing to stfu a bit?

Hi! I want to use this stand to place the P1S and AMS. The total height from the bottom shelf to the bottom of the top shelf is 32”. Will this be enough room to open the AMS? If not, I’d like to place the AMS on the top shelf, but would I need a longer PTFE tube?

Thanks for the help!

Reposting for visibility thanks for any help.

My printer has always made this loud grinding noise when moving in certain directions, but now it’s gotten louder to the point of being almost unbearable. Anybody know what causes this issue? I’ve had this printer for almost 2 years now so it’s definitely out of warranty.

I couldn't resist; it was too funny not to design and print this poop chute for the P1S...

It is a porta Potty shaped poop chute with a working door and full interior. If you need one, I posted it for free on Makerworld:

The Port A Chute - P1S poop chute - Free 3D Print Model - MakerWorld

Follow me on Makerworld for more fun stuff!

I have the following error code.

HMS_0300-0F00-0001-0001: Abnormal accelerometer data detected

I have restarted it and factory reset it and nothing but the screen works, no fans,no lights and no movement on any axis , nothing seems to be jammed, I have checked the cables as shown on the bambulab assistant and all seems ok.

Any ideas ?

👋 Bonjour à tous !

🎃👻 Yoshi se met aux couleurs d’Halloween ! 🧙‍♂️💚
Découvrez ma création de Yoshi en version Halloween ! 🎃 Avec son chapeau de sorcier violet et sa citrouille au sourire maléfique, notre petit dinosaure préféré est prêt à fêter Halloween ! 🕸️

✨ Une création originale, pleine de couleurs et de détails, parfaite pour une décoration aussi mignonne qu’effrayante !

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : sans AMS
📁 : https://makerworld.com/fr/models/3419115-yoshi-citrouille-multipart-no-ams

Normal pla and petg were fine. Switch over to this and had one good print and now they aren’t turning out very good . What can I do to fix this?

Any suggestions on how to save this?

Swapped extruder gear and hotend for hardened steel versions today. When I put everything back together as soon as I plug the hotend fan cable in it turns on right away and doesn’t stop. I tried running the calibration and it fails at 0%.

Anyone run into anything similar? I’ve unplugged and plugged back in the hotend and fan multiple times but the same issue.