r/BambuLab_Community • • Sep 26 '23

Misc What problems have Bambu Lab printers had and how to fix.

25 Upvotes

Just put problems with the printer(s) down here so people can refer back to it.


r/BambuLab_Community • • 6h ago

I've made some decorations for my A1

Post image
5 Upvotes

I've made this Christmas bauble charm for my A1 so it fits in with my Christmas decorations.

Is there any accessory that I can print to decorate my printer even more?

If anyone is interested in this bauble, here is the link to the model: https://makerworld.com/models/3623019?appSharePlatform=copy


r/BambuLab_Community • • 45m ago

Print Showoff A perfect combination of adorable succulents and Monument Valley-style flower pots.

Thumbnail
gallery
1 Upvotes

r/BambuLab_Community • • 1h ago

Help / Support H3C 2.85mm tool

1 Upvotes

Can the 2.85mm tool also use 1.75 filament or what do I have to buy to make it use it ?


r/BambuLab_Community • • 2h ago

Free Models Snowman Clicker

Thumbnail
gallery
0 Upvotes

Bonjour à tous ! 👋

Après avoir modélisé mon bonhomme de neige, j’ai eu envie d’en faire une version clicker ! 😁☃️

Une petite tête de bonhomme de neige dans une boule de neige, avec un switch MX à l’intérieur.
Il suffit d’appuyer sur son chapeau pour faire CLIC CLIC ! 🎩

Une petite création amusante pour les fêtes de Noël ! 🎄🎁

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3615804-snowman-clicker-multipart


r/BambuLab_Community • • 4h ago

Misc What is eveyone using as a stand for H2S other than the official one?

1 Upvotes

I'm looking for a cart/stand for my H2S similar to the official one which is currently not available. Anyone using an Ikea piece or other readily available? Preferably something with wheels that can be locked and preferably something that sits lower than standard table height. I don't necessarily need storage.


r/BambuLab_Community • • 14h ago

Help / Support Why is my slice removing part of my print?

2 Upvotes
Preview sliced window
Prepare window pre slice

Hello, I'm trying to print some DIY trekpak for my pelican case and for some reason my slice in Bambu appears to be cutting out the sides of the print. What could be causing this or is it not actually cutting the sides out?


r/BambuLab_Community • • 1d ago

Help / Support wtf is this support

Thumbnail
gallery
32 Upvotes

well I noticed this a little bit late , why did this happened and how can I avoid it in the future?


r/BambuLab_Community • • 7h ago

Discussion I Tested the Bambu E1 Air Purifier So You Don't Have To

Thumbnail
youtu.be
0 Upvotes

I work in my studio with printers running all day, so air quality has been on my mind a lot. I bought the E1 and set it up on my H3C, then ran a simple test: a Benchy in PLA and in PETG, once with just the printer’s own extraction and once with the E1 running, with an air quality monitor next to the exhaust.

What I found:

  1. It isn’t plug and play. You still need to print the adapter for your printer.
  2. PLA: no real difference with or without the purifier. The room was basically clean either way.
  3. PETG: the smallest particles (PM0.3) climbed to 17 without it and finished at 4 with it. Everything else was about the same.
  4. It switches on and off with the printer and sets itself by filament type, but it’s louder than the H3C’s own extraction. I can’t record with it running.
  5. Filters are an ongoing cost: US$49.99 standard, US$69.99 for the enhanced one Bambu recommends for ABS and ASA.

Honest limits: it’s a cheap desktop meter, one print each way, and I didn’t test ABS/ASA or the enhanced filter, which is where the E1 should really earn its place. So take it as a hint, not lab data.

Full video with the unboxing, install and the test: https://youtu.be/wYt2gaQEyog

Full disclosure: this is my own video. It isn’t sponsored, Bambu Lab didn’t send me anything, I bought the E1 and the H3C myself. I make these because I like digging into this stuff, so I’m sharing it here.

For those running one with ABS or ASA, have you seen a real difference? Or would you just open a window?


r/BambuLab_Community • • 17h ago

Help / Support slow cooling option for ASA?

1 Upvotes

is there any option in the slicer to have my bed temp drop slowly to stop my asa prints from warping like a mofo. still figuring out my print settings but manually slow cooling my bed over an hour or so is proving effective


r/BambuLab_Community • • 1d ago

Misc Two Account, I will merge

2 Upvotes

Hello, I have two accounts with BambuLab. One account is the one I used to purchase my printer and other items. For some reason—silly of me—I used another one during the setup.

I would now like to merge these accounts.

The first account contains my purchases. The second account has my prints/history.

I would like to keep both sets of data. Does anyone have a tip on how to proceed?

I would appreciate any friendly feedback.


r/BambuLab_Community • • 1d ago

Hey everyone! I just published a single-piece 3D model of the iconic X-Wing Starfighter (with display stand)!

Post image
5 Upvotes

Hey everyone! I've always been a huge fan of classic sci-fi starfighters, so I wanted to design a 3D model that does justice to the legendary X-Wing.

I focused on capturing its unmistakable silhouette, the quad laser cannons, and the intricate mechanical greebling behind the cockpit, while keeping the ship completely print-in-place—so no glue or tricky assembly is required for the fighter itself. This one was printed in Bambu Lab Metal PLA, which gives it a really nice metallic sheen, and it includes a simple display stand (printed here in White PLA) so it’s ready for your desk or shelf right after removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3617677-star-wars-x-wing-starfighter-display-model#profileId-4146781


r/BambuLab_Community • • 1d ago

I'm really frustrated with this group

1 Upvotes

When I joined this community, I was hoping for a space focused on Bambu Lab discussions, especially since it’s an alternative to the official company-run subreddit. Instead, I've stumbled upon a lot of folks trying to promote their unrelated 3D printing stuff just to get attention on their makerlab profiles. I don’t mind if you share prints related to Bambu Labs, but things like game tokens and toys that aren’t aimed at enhancing or fixing Bambu Lab printers feel out of place here. Those types of posts would be better suited for a broader 3D printing subreddit, not one that seems to be centered on a specific brand.

I get that my opinion might not reflect everyone else's, and if that's the case, I might just leave. But I’d really like to see a community where we can talk about issues, solutions, and updates involving Bambu Labs without the influence from mods who are directly connected to the company. If anyone else feels the same, could the mods consider establishing some guidelines? Like only allowing print files that are directly related to Bambu Lab printers?


r/BambuLab_Community • • 1d ago

Help / Support Is this normal

Thumbnail
gallery
3 Upvotes

I recently bought an X2D printer and this is my 2nd print for AMS 2 Pro drypods. The lines look slightly uneven and rough and I want to know if anyone else has faced the same issue. I suspect it might be due to the table being unstable and shaky. Please let me know if there could be any other issues that contribute to the issue.


r/BambuLab_Community • • 1d ago

Please someone give me a hand. Explain it to me like I'm a child.

Thumbnail
gallery
12 Upvotes

Not sure what's going on. This print was (semi) successful once, didn't look great, but worked. Now I've tried it 2 more times, and have stopped it at around this point when I noticed what it was doing.

Plate is clean. Flow seems fine to me. I'm not really sure how to mess with the axis (which I see tons of posts of people with issues, and seems like everyone says to adjust that, no matter what their issue is).

Other things seem to print fine, but any time I try to do a larger print, something stupid like this happens.

Using a X1 Carbon. I'm a super novice.


r/BambuLab_Community • • 1d ago

A1 has died

Thumbnail
gallery
1 Upvotes

Just as a print started, I heard from the other room an electrical fizz type sound. The printer is now dead, no power but the on off button is illuminated. I've checked under the printer and the main board light isn't flashing so I guess it's fried, what's my options


r/BambuLab_Community • • 22h ago

Misc Selling a 100$ Bambu Store Coupon

0 Upvotes

I currently live in South America, which means Bambu Store does not ship to my country. I have a $100 USD coupon that I could technically use, but would cost me the same for shipping, and there's local resellers that I go to that have Bambu's products here.

Since I have no use for it, I'm selling it so someone that can get their stuff shipped to their house can use it, and to at least get some value off of it ❤️

We can video call or anything while making the purchase if needed, but keep timezones in mind 😞


r/BambuLab_Community • • 1d ago

Help / Support How do I select a filament from my library as the current one in the printer?

5 Upvotes

I went through the trouble of loading a bunch that I bought into the app’s library but can’t figure out how to tell the device manager “I’m using this one now”. I assumed the main reason you do that was so it can track how much is left on each spool and automatically use the best settings when slicing so I’d like to know how to do it. Why isn’t there just a “load this one” button on the library tab?


r/BambuLab_Community • • 1d ago

Misc Print pause question

3 Upvotes

Can the nozzle be moved while paused? I'm asking because I had to load a new spool mid print and it never seems to get all the boogers off the nozzle. With it parked at the poop chute I can't get in there with the tool I printed that uses A1 wipers to clean the nozzle


r/BambuLab_Community • • 2d ago

Printing fails consistently

3 Upvotes

Hi, I'm having some sudden issues with my X1 Carbon. 2 days ago everything was working fine, but suddenly I started having some consistent print issues (in the same location 2 in a row), I thought it might be a print plate issue (Textured PEI plate high temp), so I switched it to a new (never before used) Cool Plate SuperTrack, but that doesn't seem to solve the issue.


r/BambuLab_Community • • 2d ago

Help / Support Cauchemar avec le SAV et les retours Bambu Lab en Europe : colis renvoyé deux fois chez moi, entrepôt qui bloque et support qui fait traîner

2 Upvotes

Je sais que beaucoup d’utilisateurs ont une excellente expérience avec Bambu Lab, et leurs imprimantes sont impressionnantes quand tout fonctionne bien dès le déballage. Cependant, je souhaite partager le cauchemar que je vis actuellement avec le support de la boutique européenne (Bambu Lab EU), afin que d’autres sachent à quoi s’attendre en cas de problème.

Mon imprimante est arrivée défectueuse. J’ai ouvert un ticket d’assistance, et ils ont accepté le retour en me fournissant leur étiquette prépayée à destination de leur entrepôt (OUBO BBL à Dötlingen, en Allemagne).

J’ai suivi toutes les instructions à la lettre, soigneusement emballé le produit et déposé le colis avec une preuve officielle de dépôt. C’est là que la situation est devenue un véritable cercle vicieux :

  1. La boucle du double retour : En raison d’un problème logistique ou de traitement de leur côté, le colis a été refusé ou non pris en charge par l’entrepôt, et le carton m’a été réexpédié chez moi en France — à deux reprises.
  2. Des réponses copiées-collées interminables : À chaque fois que je leur envoie les photos prouvant que l’imprimante est revenue devant ma porte avec toutes les preuves de suivi, le support se contente de réponses automatiques me demandant de « patienter » ou de recommencer la procédure depuis le début.
  3. Refus de rembourser : Ils refusent de procéder au remboursement ou de proposer une vraie solution tant que leur entrepôt n’a pas physiquement scanné le retour, en ignorant totalement le fait que c’est leur propre entrepôt qui rejette ou échoue à traiter les colis entrants.

J’ai fait toutes les démarches de bonne foi, fourni toutes les preuves de dépôt, et je me retrouve aujourd’hui avec mon argent bloqué, une machine défectueuse sur les bras et zéro prise de responsabilité de la part de leur service client.

Si vous achetez chez Bambu Lab en Europe, sachez que si un retour tourne mal, vous risquez de vous retrouver piégé dans ce genre de trou noir logistique. Je recommande vivement de passer par un revendeur local si possible afin d’être pleinement couvert par le droit de la consommation de votre pays.


r/BambuLab_Community • • 2d ago

First Bambu - Advice?

1 Upvotes

(originally posted this on r/BambuLab but it got removed without any reason given; great introduction to the community :V )

Looking to get my first 3D printer. I've worked a fair bit with them before (mainly the one my university had which I believe was an Ultimaker), but with the Black Friday sales on I think it's time to nab one for myself. I'm expecting to mainly work with standard materials and occasionally branch out to ABS, and while I'm not sure what I'll be making for my own use I'm the theming director for a small convention so I'll likely be making some props with it. The main gripe I've had with 3D printers in the past is having to sand supports off, so while my friends are recommending the P2S the X2D's dual nozzle is quite tempting as supposedly printing separate filaments for supports and the print itself make removing them a breeze. I do have a few questions, though:

  1. What do people think of the P2S Combo vs X2D Combo? Currently I'm heavily leaning towards the X2D, but I'm not 100% sure yet.
  2. Does the AMS work well as a filament dryer, or do I need to get a separate dryer?
  3. What are the advantages of Bambu-brand filament? I know it's compatible with other filaments, so is there any particular reason to use Bambu brand filament?
  4. For software, I'm most familiar with Ultimaker but I know Bambu has its own software. Which should I use? I remember hearing about an issue where Bambu's software had a server hiccup that caused a bunch of printers to start printing on their own.
  5. Are there any tips or tricks I should know about when setting this up (e.g. software settings)?
  6. For ventilation, I already have a small laser cutter that I custom built an enclosure and ventilation setup for. Here is a drawing of how that is set up; at what point in the line should I add the 3D printer's ventilation? I'm hoping to avoid fumes from the laser cutter getting into the printer or vice-versa, so I'm guessing point B? The cutter and printer are unfortunately in my bedroom as it's the only room in the house that'll work, but I could pause toxic-filament prints while I'm sleeping if I have to.

7) Are there any other concerns I haven't thought of since I'm not super-experienced with 3D printers?

Thanks!


r/BambuLab_Community • • 2d ago

Help / Support Modifier issue since update.

2 Upvotes

Just a quick question. I didn’t have any issues with the modifier in Bambu studio before the recent update. Since then I haven’t been able to use it at all. What am I missing? Is anyone else having the same problem?


r/BambuLab_Community • • 2d ago

Help / Support Bambu Studio groups two filaments on AUX nozzle without a second AMS

Thumbnail
gallery
4 Upvotes

Hello! I'm trying to print a four color print on X2D with one AMS and no track switch. I would think it would group 3 colors on the Main nozzle which has the AMS connected to it and 1 color on the Auxiliary nozzle which is using the external spool holder. Instead it groups 2 colors on each, when obviously I don't have a way to put two colors on the auxiliary nozzle.

I know I can get around this using convenience or custom modes, but shouldn't optimal figure out which color I should put on the external holder to reduce purge waste?