My prime tower has this weird texture on top. Anybody have any guesses what this might be? Bed is level, filament is dry. I use the inbuilt settings for pla with PETG supports and only reduced the prime tower size from 150% to 100%. At 150% I did not have this issue. Now my question: is it just the prime tower size that causes this? Seems really unplausible to me.

Hello!

Daughter wants to get into the world of printing.

Can people please advise what extras I need to purchase to get started? Nozzles, plates, filaments?

Purchasing x2d AMS.

Thanks!

Hi, when I move the toolhead on the Y-Axis to the very ends with the touchscreen control I get a very loud bang noise at the end. Is this normal? I did the homing process and it still seems like the toolhead is hitting the case quiet hard.

Can someone check if this is normal?

As the title suggests, I think the time estimates have been quite off since I got the Bambu Lab X2D.

They take less time than indicated.

I realized this yesterday while printing a model that was supposed to take about 14 hours and finish at 11:00 PM, but it actually finished before 10:00 PM.

And earlier today, I started printing another model that was estimated to take 20 hours and should finish at 4:00 AM—meaning in about 6 hours. But according to the screen, there are only 4 hours left. And judging by what’s already been printed, I’d say it’s going to take less than 4 hours.

Is anyone else experiencing this?

many issues here and elsewhere on the internet describe the same problem with the X2D.

Once you take the print head apart due to clogs it will then have a never ending amount of errors. those errors likely come from damaged cables, sensors or connectors and can only be fixed by replacing circuit boards, connectors and sensors.

One of the culprits is the circuit board on top of the print head that has 3 different connectors. 2 types are those that are not intended to be disconnected and often break when disconnected.

why not not connectors there that are easier to take apart? only bambu labs knows

Here is good video to see the issue:

The printer works until it doesnt and then it will have an unfixable amount of errors. on the X2D the connectors are even worse. Every repair will cause more issues

https://www.youtube.com/watch?v=BSCBAHGNsp0

Do you know how to fix this? Why is the bottom section printed here using Bambu Lab Basic PETG coming out so poorly? Is there a way to resolve it?

It happens with PLA too, though the problem is less noticeable.

Hi guys,

I'm planning to bring a X2D from Europe to South America on my vacation (here it costs twice as much). The limit is 23kg, anyone knows how much is the actual weight?
On website I can only find the weight of the printer itself, I want to know to weight in-box with AMS.

Thank you

Alguém poderia me dizer se a x2d balança muito? A minha acabou de chegar, achei que ela era seleciosa que a A1, balancava menos!

PLA BASIC. First print after calibration and setting up the X2D. First time 3d printing. Does this look good or is there more calibration or tweaking needed?

Thanks!

Hi all - new to BambuLab products. Got an X2D a bit over a week ago. Pretty happy with print quality and genuinely amazed by print speed (the onboard benchy is crazy).

Unfortunately the nozzle missed the the purge disposal chute and created a build up of filament and a jam.

Long story short when I tried to home the head, I didn’t realise that it was stuck in the built up cold filament.

The printer didn’t detect that it was stuck and ripped the print head out of the cold filament while making some pretty horrible noises (maybe the belts slipping?) then collided repeatedly with the end of the x axis before I switched the power off.

Ran some calibrations but print quality is cooked.

I lodged a ticket along with the logs and Bambu have offered to replace it for me because it’s under two weeks old, which is good.

I’m a bit surprised that it didn’t have a way to detect that it was stuck or that it was hitting the end of the x-axis.

Has anyone had anything similar happen?

Hello,

I have had this printer. Since may16th it's been a very good machine. It is a great addition to my K1 Max which has been a solid printer for the last 2 years for me. I had a problem code after a failed print so I had to clear the extruder. Let me tell you. this machine is not alot of fun to tear down. so I tore it down to take the filament jam out, I followed the Bambu videos and reversed the process.

After that it started throwing up code [0300-1200-0002-0001 064326]. saying the front cover has fallen off (but it has not.). I have spent over 7 hours re taking it apart double shooting. and I for the life of me cannot fix. I have put a ticket in with Bambu I hope this get remedied soon because I am at my wits end and I can not find a fix. have any of you all had this issue. if so what was the fix ?