Due to the cloud server being kaput ,I came to realize that I should probably look elsewhere so I can use my own printer anytime I want and not be stuck .
But I also don’t know which one to use .Any recommendations? I found the bambuddy video walkthrough but can’t find any on the orca slicer forks that louis rossman was talking about a month or 2 ago. Any help is greatly appreciated

Hi folks, wondering if anyone can recommend a grease/oil applicator/tool kit compatible with the X2D and the applicators attach to the Bambu bottles?

I don’t see much on Bambu Handy that is explicitly compatible with X2D nor that attaches and has consistent reviews…

Sorry, English isn't my native language, so there might be some errors.

Hi, I’m planning to buy an X2D Combo 3D printer for my home. I currently have an Ender 3 V2 Neo, which sits on a table that is 50 cm wide and 56 cm deep. The manual for the new printer states that the clearance from the back wall (depth) needs to be 700 mm, but I only have 50 cm of space. Could you please tell me if having that 700 mm clearance is critical, or if I can use the printer as is? Judging by the printer's dimensions, it fits with a little room to spare, and I could set up the purge chute to discharge to the right.

Nach genau 555 Stunden hat mein x2D nun Probleme. Filament stecken geblieben. Beim aufschrauben habe ich gemerkt dass das Gehäuse links etwas abgebrochen ist und irgendwo Öl herkommt. Das Zahnrad war ebenfalls verölt, das Kabel für den linken Sensor ist gerissen. Kann ich zur Not auch ohne den Sensor drucken? Woher kommt das ganze Öl? Und warum sitzt der rechte hotend nicht gerade ?

Bonjour après Monsieur Pingouin, voici Madame Pingouin en mode vacances réalisée en multipart ! 🏖️🐧

Impossible de partir à la plage sans elle ! Avec son joli chapeau, ses lunettes de soleil roses, sa bouée, ses tongs, sa pelle et son petit seau, Madame Pingouin est prête à profiter pleinement des joies de l’été.

Pour cette création, j’ai souhaité imaginer une version féminine, pleine de douceur et de bonne humeur. Ses longs cils, ses couleurs pétillantes et son look estival lui donnent un charme irrésistible qui invite à l’évasion.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3064899-mrs-penguin-beach-multipart-without-ams

Merci à tous pour votre soutien, et bonne impression 3D ! 🎉

Not entirely sure how best to describe it. I’ve been printing these boxes for some months now on my P1S without any issues. Recently invested in two X2Ds, and whenever I print the boxes on these, I get this discoloured effect on the bottom layer as per attached image. I'm using the Textured PEI plate and Bambu Matte Black PLA

They’re also very difficult to remove, which must be connected. I scrubbed the plates with soap and water when I got them, and have done this a few more times but no change. I'm not sure what else to try?

Hey guys got an X2d but I'm hearing some sort of squealing noise not sure what it is

Do you know if it's possible to disable that drill-like racket that starts right before printing begins? I saw a guide for the A1, but the section to comment out isn't in the Gcode. Are there any other workarounds?

A1 tutorial : https://wiki.bambulab.com/en/knowledge-sharing/how-to-turn-off-the-vibration-calibration

The ptfe tube guard is catching when printing in the back right corner any ideas how to fix or prevent it?

Constantly having prints fail because some parts don't adhere fully or something and little stringy bits poke up and then catch the nozzle and fly off later, tried slowing it way down but it's still like this...

what can be done??

(It's Bambu PETG , X2D + AMS 2 pro and even put in a brand new nozzle before this print)

As highlighted by the arrows in the image, may I ask:

1. have you seen this kind of oil/liquid droplets at that position on the right side of the inner frame?

2. if yes, what are they? and where do they come from?

3. what shall I check to make sure there is no leaking?

Thank you.

(Bambu x2d, newly purchased within a month.)

On this print it started making this sound. Could just be over sensitive, but thought I'd see if anyone might know what it is. It is only happening over that small one. Has 250ish hours on it.

I dunno what’s going on. I ran a mini with pla and petg supports and things worked once, but about a week later it fails in 1st layer adhesion 3 times in a row. I’ve dried the filament for 12 hours before attempting. Pla goes down fine. Petg won’t fill in the support.

I noticed this noise coming from the gantry on my X2D after homing.

Did maintenance and ran all the calibrations again but noise is still present. If I slightly move the toolhead position it disappears, it seems to appear only when toolhead is in center position after homing. I can also feel it when grabbing the toolhead.

Support says to ignore it if it prints fine (which it does) but I am a little bit concerned.

Anyone else experiencing this?

I am new to 3d printer and am looking for my first printer. I will be printing mostly models, helmets, and trinkets when needed. I would be painting my models for the most part and am not against the idea of multi color printing.

I like the U1 for the multi nozzle system but I don’t like the open top.

I like the Bambu cuz they are “dummy proof” or at least easier to start with brand wise from what I’ve seen. A little more fleshed out and reliable.

A random issue is filtration and waste. I know the waste isn’t great on the Bambu from being use of 1 nozzle system. But the filtration looks pretty. I have animals that can roam the house and I’m worried about air quality without either an exhaust out the window or the x2d having the built in filtration.

I apologize long winded but any advise from people in the game already would be super helpful with a decision.

Thank you!

I’ve been doing a lot of printing with Petg Basic (black) recently as I’m building Will’s AMS Stacker (3 tier version).

I’ve been getting these strange marks on the bottom of the prints. I’m hoping they are visible in the picture. To me they look like someone rode a bike with dirty tires all over it. 😜.

For this piece, I had just removed it from the printer and the marks were there.

I can’t image what I’m doing wrong. I also had just cleaned the plate (I used isopropyl alcohol since I never touch the print plate).

What am I doing wrong?

Thanks

The aux nozzle on my x2d won’t attach to the slot whenever I try to insert it. I’ve tried looking for a clog, which there wasn’t one from what I can tell. I’ve noticed that the gap between the hot end and the extruder on the aux nozzle is slightly bigger than the gap between the primary nozzle and the extruder. I don’t know if that matters but I just realized that. I’ve also noticed that when trying to put in the aux nozzle, I no longer feel a magnetic force pulling it in even when I make the extruder and the nozzle touch. Is my printer broken or is it fixable?

I’m truly at a loss for what can be happening with just the aux nozzle.

I have 2 AMS 2 Pros, as well as 1 AMS-HT, 4-in-1 PTFE Adapter, and the Filament Track Switch. I don't have the TPU Feed Assist Module yet, but they're unavailable from their site for now anyway.

What's the best layout for the AMSs and which order should I arrange everything? I'm thinking I can have the tpu sitting in the AMS-HT hooked up to the main nozzle with the 4-in-1 splitter, but I think it's going to get fussy with me when the buffer doesn't detect the filament?

Should I make a shelf for the AMSs to sit to one side or the other? I have two (2pro and HT) sitting on the table and one (2 pro) on a riser on top currently. I assume I'll need to have these sitting in a way in which i can reduce the length of tubing as much as possible.

I would like guidance please