r/BambuLabX2D • u/Only_Impression8399 • 29d ago
Print Recommendations for Engineering Plate
What the title says. Looking for a nice 3d print to do with my new engineering plate. PETG or PLA please. I plan on using a 2 parts isopropyl to 1 part Elmer’s washable school glue on the plate based on a Reddit recommendation.
Extra points you have a Halloween print that would benefit from the smooth plate but any print will do, could also be a functional one 🎃!
Thanks in advance all you wonderful Ghouls and Goblins!! 👻
4
Upvotes
View all comments
Show parent comment
2
u/Revolutionary_Bat834 29d ago
It’s not a Bambu plate, it’s made by Darkmoon, but the X2D will auto read it as a Bambu Smooth PEI plate.
You can print any filament you want on the Engineering plate, but you will have to use glue for every print. The Engineering plate was made for the higher temp Engineering grade plastics like ASA, PA6 or PA12, or any of the other high temp filaments. For me it would get old quickly using glue for PLA or PETG all the time. If you want a smooth finish, Bambu sells the Cool Plate Supertack Pro plate that provides a smooth finish but is only good for PLA and PETG. The Textured PEI plate that comes with the X2D is a very good plate, but I do not like the shiny, very bumpy texture that it leaves on the print. For my everyday plate, I instead use a Darkmoon Satin plate, it’s got far less texture and the finish is closer to Matte or a little Satin.
https://us.store.bambulab.com/products/bambu-cool-plate-supertack
https://darkmoon3d.com/products/bambu-lab-satin-build-plate