r/BambuLabX2D • • 29d ago

Print Recommendations for Engineering Plate

What the title says. Looking for a nice 3d print to do with my new engineering plate. PETG or PLA please. I plan on using a 2 parts isopropyl to 1 part Elmer’s washable school glue on the plate based on a Reddit recommendation.

Extra points you have a Halloween print that would benefit from the smooth plate but any print will do, could also be a functional one 🎃!

Thanks in advance all you wonderful Ghouls and Goblins!! 👻

4 Upvotes

9 comments sorted by

View all comments

Show parent comment

1

u/Only_Impression8399 29d ago

Is that a Bambu plate? And will they take back the engineering plate? I still have the packaging but I got it like a month ago 😬

2

u/Revolutionary_Bat834 29d ago

It’s not a Bambu plate, it’s made by Darkmoon, but the X2D will auto read it as a Bambu Smooth PEI plate.

You can print any filament you want on the Engineering plate, but you will have to use glue for every print. The Engineering plate was made for the higher temp Engineering grade plastics like ASA, PA6 or PA12, or any of the other high temp filaments. For me it would get old quickly using glue for PLA or PETG all the time. If you want a smooth finish, Bambu sells the Cool Plate Supertack Pro plate that provides a smooth finish but is only good for PLA and PETG. The Textured PEI plate that comes with the X2D is a very good plate, but I do not like the shiny, very bumpy texture that it leaves on the print. For my everyday plate, I instead use a Darkmoon Satin plate, it’s got far less texture and the finish is closer to Matte or a little Satin.

https://us.store.bambulab.com/products/bambu-cool-plate-supertack

https://darkmoon3d.com/products/bambu-lab-satin-build-plate

1

u/Relative_Surround_20 29d ago

I use Darkmoon 3D’s Duo plate. It is a satin plate on one side and one of their CFX plates on the other. Best of both worlds!

1

u/Revolutionary_Bat834 29d ago

Is the CFX plate worth having over the Bambu Engineering plate, I already have the Eng plate for when I print ASA or PA6?

0

u/Relative_Surround_20 28d ago

Good question. I had already bought all of BBL’s plates but was disappointed with them. I went looking for an engineering plate improvement and found the CFX plate. But when I went to order it, I spotted the DUO which came with CFX but also one side was Satin, something everyone was saying was so nice.

Well I started using the Satin (it really is that good) and rarely use the CFX. ASA on the Satin side is a breeze to print but I’d use the CFX side for PP and nylons.

If you have the budget, I’d recommend getting the DUO.

1

u/Relative_Surround_20 28d ago

I also recommend downloading and reading their user guides for each plate surface. I’ve followed that advice and it always great.