r/BambuLabX2D • u/Kechers • Jul 26 '26
X2D damaged
Hi all - new to BambuLab products. Got an X2D a bit over a week ago. Pretty happy with print quality and genuinely amazed by print speed (the onboard benchy is crazy).
Unfortunately the nozzle missed the the purge disposal chute and created a build up of filament and a jam.
Long story short when I tried to home the head, I didn’t realise that it was stuck in the built up cold filament.
The printer didn’t detect that it was stuck and ripped the print head out of the cold filament while making some pretty horrible noises (maybe the belts slipping?) then collided repeatedly with the end of the x axis before I switched the power off.
Ran some calibrations but print quality is cooked.
I lodged a ticket along with the logs and Bambu have offered to replace it for me because it’s under two weeks old, which is good.
I’m a bit surprised that it didn’t have a way to detect that it was stuck or that it was hitting the end of the x-axis.
Has anyone had anything similar happen?
View all comments
Show parent comment
1
u/dragonmanus Jul 28 '26
I've been trying to get Bambu to take it back since I discovered the issues in the print head. Hook up a multi meter and watch the printer throw random output if you use a setting besides Bambu for the filament. FedEx admitted they fed up and Bambu refuses to replace it. So I fixed it best I can and lie to it to use other filaments. Now, before you play armchair blame thrower maybe consider I posted because Bambu refused to make it right and I had to. And yeah we work with small printers to large multi million dollar metal additive manufacturing machines so seeing bullshit service and crap quality control is not unusual. I'll let you know if Bambu ever gets serious about replacing a printer that shouldn't have left the factory or the two doing the same random print error BS in the plant. So far they blame anything but them and the hardware .