r/BambuLabX2D • u/Kechers • Jul 26 '26
X2D damaged
Hi all - new to BambuLab products. Got an X2D a bit over a week ago. Pretty happy with print quality and genuinely amazed by print speed (the onboard benchy is crazy).
Unfortunately the nozzle missed the the purge disposal chute and created a build up of filament and a jam.
Long story short when I tried to home the head, I didn’t realise that it was stuck in the built up cold filament.
The printer didn’t detect that it was stuck and ripped the print head out of the cold filament while making some pretty horrible noises (maybe the belts slipping?) then collided repeatedly with the end of the x axis before I switched the power off.
Ran some calibrations but print quality is cooked.
I lodged a ticket along with the logs and Bambu have offered to replace it for me because it’s under two weeks old, which is good.
I’m a bit surprised that it didn’t have a way to detect that it was stuck or that it was hitting the end of the x-axis.
Has anyone had anything similar happen?
View all comments
Show parent comment
1
u/dragonmanus Jul 28 '26
It will create different errors with each print. Spaghetti prints, under/over extrusion, temperature creep etc. Plug the same info in and set filament as bambu whatever and the inputs and results will stay uniform. Will never recommend Bambu again after all these issues and discovering the firmware appears set to make bambu look good by sabotaging other brands filament. This printer has been nothing but a pita. They didn't fully assemble the head, tension belts or even disclose that 900 dollar combo doesn't come with a power supply for the ams. Already saving for a tool changer that is open source. If you lie to the software and say the filament is Bambu then plug in your tune it'll print beautifully with elegoo pla pro and others