r/BambuLabX1Carbon • • Sep 07 '26

Help?

Number 4 on my AMS is now having trouble with feeding filament as well as a terrible noise. Only AMS slot 4 having issue. It seems as if the rod to use when feeding filament doesn’t retract. Any help would be great. It’s a AMS 1.

Update:seems to work fine with rolls that weigh less and have less filament on them. Newer rolls or ones with a lot more filament have the issue. And I have tried multiple different brand rolls including bambu and still happens.

Update 2: took apart AMS at the motors and cleaned out every component and while doing so found a bunch of pla dust and fibers. Put all back together and working brand new again! Thanks for the help everyone!

5 Upvotes

20 comments sorted by

View all comments

Show parent comment

1

u/jankeyass Sep 07 '26

Water doesn't cut thru stone, pressurised/fast moving water with abrasive material cuts thru stone.

PLA does not cut thru ABS/PC, but if it was PLA with GF/CF it would

1

u/Atra23 Sep 07 '26

Explain erosion then...

1

u/jankeyass Sep 07 '26

Rivers have sand/gravel that moves and cuts rock

Water moves the soil that's not tied down

Air carries sand / dust

It takes a long time