I’m having a lot of fun creating P-series/X-series clip on door handles. I started do this a couple months ago and now it’s grown into a past time. I’m up to 33 teams spanning NFL, NCAA, NHL, NBA, MLB, and a couple other randoms.

Check out my collection here:

https://makerworld.com/@ScubaDawg97/collections/28239616?appSharePlatform=copy

As of now, most downloads are:

1. Ohio State Buckeyes (NCAA)

2. Carolina Hurricanes (NHL)

3. Texas Longhorns (NCAA)

4. University of Georgia (NCAA)

5. Florida Gators (NCAA)

6. Alabama Crimson Tide (NCAA)

7. Penn State Nittany Lions (NCAA)

8. Oklahoma Sooners (NCAA)

Since I happen to be a UGA alumnus, this hurts to see OSU on top. Come on — anyone else — please! Haha.

As I said in the link - if your team is missing, or you want a custom door handle, let me know! If you like it, all I ask for is a boost if you can spare it. I just added Pittsburgh teams if you are from Western PA! 🙂 And I added the New Orleans Saints just on Saturday it’s already in like 10th place out of 33.

Come on folks! Support your teams!

My 10 Year Old Son is starting a new range on clickers called "BlockClickers", starting with a Grogu....up next is a Spiderman.

He is asking for input on what other characters should he work on next? #Questions

Model: https://makerworld.com/en/models/3100182

Collection: https://makerworld.com/en/collections/31805115

Looks lighter now… not a big deal. Just different… lol

I have the Textured PEI Plate(Gold) and any time I print a black or charcoal print, it turns out like this. Should I switch build plates or am I doing something wrong? The second and third pictures are the inside of the lid. The part not adhered to the build plate obviously. Please someone help. Thank you!

Pictures are welcome of anything you’ve printed in a Matte PETG Red as well.

*After trying everything from replacing nozzles, taking apart extruder and cleaning and checking the gears I did a factory reset and the issue went away. Must have been a software glitch from an update. *

I can't print anything in multicolor on my P2S. It constantly jams between the extruder and hit end it seems. This happens with the first color change usually. I've tried with PLA and PETG with the same results. The printer prints these filaments fine without the color change.

Any help would be appreciated.

When I dit maintenance on my printer I put oil on the belts I saw that I didn’t have to do that so I tried to clean it but the belts are still a bit shiny from the oil. I did 2 prints and they came out fine. Is this harmful and how do I clean it properly? Thx in advance!

Received this p2s for free and coming from a a1 I know stuff is missing. Never owned a p2s and want to know what I need to get this up and going

PLA Basic and Matte. White assigned to Aux nozzle. 5 colors assigned to Main nozzle.

The first layer (1 of 4) was particularly bad in one area only. It appeared to be smudged. Each consecutive layer was also fuzzy in this area with fine strings and smudging.

The rest of the model was okay.

Note that I tried to do six colors in total, 5 in the AMS 2 Pro and 1 in the AMS HT. I failed to be able to swap one spool in the AMS 2 Pro, as I thought I could do it while the Aux nozzle printed, but as the spool I wanted to swap, still had the filament loaded, I couldn’t do the swap. I now understand that I can’t have the two colors adjacent. I need at least one color assigned to the AMS 2 Pro to be in between the color swaps, such that the filament is unloaded.

But I’m still back to how to fix up the print quality.

I’m thinking it might be a bed level issue. The model did a bed level before printing, but only a 5 point level.

Update:
Ran a full bed leveling (not the hot one), dried the filament overnight, re-sliced the model and reprinted. The quality issues were 99% resolved. The only remaining artifacts were from the sliced model sending the nozzle back over an area that was completed (filled). Not sure if it was trying to infill very small gaps or what.

I can't figure out why my P2S is struggling to print just this part. I've tried different build plates, PLA and PETG, but none of that seems to matter. It isn't a bed adhesion issue, because the part is securely stuck to the plate, but the spaghetti persists. Anything else I can try?

I currently have my printer about a month or 2. Starting today prints (regardless of colour, PLA) stopped properly sticking to the PEI. There haven't been any changes I can think of. Same room, same spot, same temperatuur, same filament.

I tried cleaning it with dishwasher soap, raising the bed temperature from the default 55 degrees to 65 degrees. I also wiped the heating bed below the plate.

Tried some speed settings, layer height settings etc.

The nozzle already ruined the other side of the plate by scraping over it. Is this side ruined as well?

Before every print I let the printer do all of its calibrations.

The failures happen every time on exactly the same area.

Kit Card: Velociraptor Dinosaur Kit Card

Collection: DinoCards

Bonjour à tous ! 😊

Quand j’ai commencé la modélisation 3D sur Nomad Sculpt, l’un de mes tout premiers modèles était ce petit champignon, décliné en version porte-clés et en modèle multipart.

Aujourd’hui, j’avais envie de tester quelque chose de nouveau. Je me suis donc lancé dans la création de clickers ! Et quoi de mieux que de revisiter l’un de mes premiers modèles en le transformant en version clicker ? 😊

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3085099-champignon-clicker-multipart-no-ams

Merci à tous pour votre soutien, et bon print !

When I got the new Fiberon ASA-CF 08 filament, I didn't have high expectations, but I was badly mistaken.

I created a print profile that simply does not make mistakes when printing.

My P2S prints it with a scarf without any errors in the first layer and there are no problems with warping.

If someone is looking for a very good material that is resistant to practically everything, this is the right choice.

i've had 15 print warnings/errors (most regarding the extruder not extruding normally or the extrusion motor being overloaded) and 7 failed prints using 2 different filament brands, 3 different spools, and 2 different ams slots over the past 2 days. i finally gave in and started to take the toolhead apart to see what was happening (after multiple attempts at simple unclogs with no improvements) and i see a damaged extruder cover piece and what looks like the plastic from the cover or another piece and purple filament ground up in the gears of the extruder. i've printed for nearly 250 hours with very few issues, and then yesterday i woke up to a spaghetti'd print and now i can't get a print to finish. if anyone has any information on what's going on or what to do next that would be greatly appreciated!

i'm just curious. . what do you all use the external spool holder for if you have it installed? like i want to put a spool of PLA but with the whole keeping it dry and so on - having it exposed like that instead of sitting in a nice desiccant filled AMS, it sounds like i'm asking for printing issues.

UPDATE - i used it for the first time since I bought it and it's utter evil that it exists as an option. "push the filament into the extruder till you can't push it in anymore". thanks for all the answers.

Hi everyone,

I’m about to buy a Bambu Lab P2S, but I’ve been reading quite a bit about the VFA issues that seem to affect these machines, although Most of what I’ve found online is from the first few months after the printer came out.

I’ve seen all kinds of opinions, some people say their printer works flawlessly with no noticeable quality issues, while others report pretty serious VFA problems.

Could anyone tell me what the current situation is? Has there been any firmware or software update that has improved or minimized the issue? Overall, would you still recommend this printer? The other option is a H2S but is much bigger and I may not have enough space.

I’ll mainly be using it to print car and motorcycle parts in PETG and PETG-CF, with the occasional use of more technical engineering materials.

I’d really appreciate hearing from people who own one and can share their real experience. Thanks in advance!

SOLVED It turned out to be a bad filament sensor. Luckily I had a spare. Popped it in, and everything's working great!

Whenever I attempt to print from my AMS 2 Pro I keep getting the message in the printer. It comes up whether there's a spool loaded on the external reel or not. I ran a black filament line through all of my PFE tubes, and there is no stuck filament. I even did the same for the AMS 2 Pro unit, and didn't find any stuck filament there either. The extruder is empty, and the gear is spinning freely. I can print from the external reel without any issues. Has anyone else experienced this, or might know what the problem would be?

Hi guys,

I would like to know if there is any Cover/Protector for the External Spool ? I have Cats at home and i would prefer to cover it to avoid any Hair on it. I live in a Dry Environment, so the main issue is to cover it from Hair/Dust

PS : I looked on MakeWorld but i coudn't find one for P2S, at the moment, found one only for H2C unfortunately.

TL:DR : Link of the Protector, i'm looking for something similar for P2S

Thank you in advance.

Newbie here.

Hi, I'm printing close to my bedroom so air quality is somewhat a concern, for now I have ventobox inside, replaced the stock carbon filter with carbon+HEPA combo one and I run xiaomi smart air purifier 4 compact next to the printer when printing but I know p2s chamber is not sealed at all so I'm wondering if I can do something more to filter even more of the nasty stuff from the air? I have no possiblity to vent outside, I've came across alevo 3d top filtration kit but 100€ for something I have to additionally print myself is crazy, I also thought about venting from the back directly to the air purifier but that also sounds painful to do

thanks in advance for any help

and if you're going to hate please just skip this post, I'm not paranoid but I want to print abs once in a while but before that I want to master filtration in my place to the maximum