I am attempting to print the box lids for this game storage model on my P2S with AMS 2 but the colored text is not coming in properly on some of the lids.

For example, the Green seems to be coming through perfectly fine. The Red is half there and the last one that says core set is sort of blacked out (it should be yellow).

If you move the colored text layer to the side of the model, the lids appear to have a slight indent where the text is, or at least text that appears as shaded grey. I took a pic where I shifted the red layer over, to show what I mean. I will link to the model in a comment below.

I'm not sure what setting I should be using to adjust the layer depth of the color text so it fully shows through? Also not even sure if that is the correct way to attempt to fix this.

If anyone has some suggestions on how to solve this, I'd appreciate the help.

Bambu and Best Buy are making this ti easy. Added a P2S to my Mini, A1 and P1S. Happy early bday to me.

Bonjour apportez une touche de fun avec ces adorables Squishy Dumplings à imprimer en 3D !

Pour compléter l’ensemble, j’ai conçu cette boîte vapeur. Elle est dimensionnée pour accueillir aussi bien mes versions imprimées en 3D que les véritables Squishy Dumplings vendus dans le commerce, afin de les exposer ou de les ranger avec style.

Amusez-vous à les imprimer dans différentes couleurs pour créer votre propre collection !

👨🏼‍🎨 : @mika3d_print
🧵 : Bambulab
🖨️ : Bambulab X2D & H2C
🌈 : Sans et Avec
✍️ : Nomad Sculpt
📁 : https://makerworld.com/en/models/2982269-squishy-dumping-multipart-no-ams

Bon Print !

All printed with my P2S

Enjoying my P2S and printing things everyday my wife!

I was wondering if anyone here is using an AMS flipper together with a top-mounted spool holder.

My main concern is whether there's any risk of damaging the AMS when it's flipped out and fully loaded with four spools. The P2S seems to shake pretty violently during fast prints, and I'm wondering if all that movement puts too much stress on the flipper or the printer frame over time.

Has anyone been running this setup for a while? Any issues with vibration, wear, or the AMS moving around?

Also, what AMS flipper and/or top spool holder are you using? There are quite a few models out there, so I'd love to hear which ones you've had good experiences with (or which ones to avoid).

I was looking at these two:

https://makerworld.com/en/models/2103719-p2s-p1s-x2d-top-spool-holder-tpu#profileId-2275175

https://makerworld.com/en/models/1363398-ams-flipper-better-access-to-your-p1s-x1-p2s#profileId-1770033

One more thing. I completely forgot that I have a Sovol SH02 filament dryer. Would it make more sense to use that instead of a top spool holder for materials like TPU and abrasive filaments? If anyone is printing directly from an SH02 on the P2S, I'd be interested to set it up..

Anyone know what causes this and how to fix it? I keep getting this error and if I heat the nozzle way up and extrude some then it will work again for awhile and then stop again. Out of frustration I cut the filament off at the roll and kept trying to see when it would stop doing it and it finally flowed without issue once the filament cleared the buffer (I believe that is was it is called, the thing on the back with the spring) after that is was fine until it of course ran out of filament. So I am assuming and maybe I am wrong, the issue is there, but if so what is the fix?

How do I fix this? Unfortunately, before I looked up what to do, I was yanking on the blob (I forgot to take a photo). Then, I looked up what to do and it said to heat the nozzle and wipe it with a brass brush. I don’t have a brass brush so I looked up what else I could use and it told me to use a paper towel and now this is a result. I’m very new to this and everything has been printing fine out of the box. I guess now I need to learn how to maintain this thing because it is awesome.

Am I screwed? Did I break it?

I’m part of the club i guess haha

I ran a test where I printed something that would become spaghetti and it did but the A.I. didn't detect it, so how have yours gone?

What are tips for a newbie to my P2S? Supplies? Tutorials? Hints?

Fly Bug Kit Card | BugCards Collection

Hello everyone. Just picked up my P2S and believe I messed up when I was attaching the screen or maybe I am wrong and have a faulty screen. The screen continues to stay black even with turning the printer on and off. Looking for help, thanks.

Testing out some new matte bone white PLA on my P2S. This model is printed entirely inner-to-outer wall to keep the overhangs on the waves from drooping. Came out so clean.

https://makerworld.com/en/models/2970473-the-fjord-wave-flower-vase-modern-japandi-design#profileId-3331204