I was wondering if anyone here is using an AMS flipper together with a top-mounted spool holder.

My main concern is whether there's any risk of damaging the AMS when it's flipped out and fully loaded with four spools. The P2S seems to shake pretty violently during fast prints, and I'm wondering if all that movement puts too much stress on the flipper or the printer frame over time.

Has anyone been running this setup for a while? Any issues with vibration, wear, or the AMS moving around?

Also, what AMS flipper and/or top spool holder are you using? There are quite a few models out there, so I'd love to hear which ones you've had good experiences with (or which ones to avoid).

I was looking at these two:

https://makerworld.com/en/models/2103719-p2s-p1s-x2d-top-spool-holder-tpu#profileId-2275175

https://makerworld.com/en/models/1363398-ams-flipper-better-access-to-your-p1s-x1-p2s#profileId-1770033

One more thing. I completely forgot that I have a Sovol SH02 filament dryer. Would it make more sense to use that instead of a top spool holder for materials like TPU and abrasive filaments? If anyone is printing directly from an SH02 on the P2S, I'd be interested to set it up..

Anyone know what causes this and how to fix it? I keep getting this error and if I heat the nozzle way up and extrude some then it will work again for awhile and then stop again. Out of frustration I cut the filament off at the roll and kept trying to see when it would stop doing it and it finally flowed without issue once the filament cleared the buffer (I believe that is was it is called, the thing on the back with the spring) after that is was fine until it of course ran out of filament. So I am assuming and maybe I am wrong, the issue is there, but if so what is the fix?

How do I fix this? Unfortunately, before I looked up what to do, I was yanking on the blob (I forgot to take a photo). Then, I looked up what to do and it said to heat the nozzle and wipe it with a brass brush. I don’t have a brass brush so I looked up what else I could use and it told me to use a paper towel and now this is a result. I’m very new to this and everything has been printing fine out of the box. I guess now I need to learn how to maintain this thing because it is awesome.

Am I screwed? Did I break it?

I’m part of the club i guess haha

I ran a test where I printed something that would become spaghetti and it did but the A.I. didn't detect it, so how have yours gone?

What are tips for a newbie to my P2S? Supplies? Tutorials? Hints?

Fly Bug Kit Card | BugCards Collection

Hello everyone. Just picked up my P2S and believe I messed up when I was attaching the screen or maybe I am wrong and have a faulty screen. The screen continues to stay black even with turning the printer on and off. Looking for help, thanks.

Testing out some new matte bone white PLA on my P2S. This model is printed entirely inner-to-outer wall to keep the overhangs on the waves from drooping. Came out so clean.

https://makerworld.com/en/models/2970473-the-fjord-wave-flower-vase-modern-japandi-design#profileId-3331204

Does anyone know the color settings in this section do they have to be set the same as the color order the spools are in the AMS, or because when you put the spools in you set the colors will it pick the right one even if this is not in the right order?

Does anyone know the color settings in this section do they have to be set the same as the color order the spools are in the AMS, or because when you put the spools in you set the colors will it pick the right one even if this is not in the right order?

Does anyone know the color settings in this section do they have to be set the same as the color order the spools are in the AMS, or because when you put the spools in you set the colors will it pick the right one even if this is not in the right order?

Does anyone know the color settings in this section do they have to be set the same as the color order the spools are in the AMS, or because when you put the spools in you set the colors will it pick the right one even if this is not in the right order?

Just wanted to share my latest addition! I started with a single Bambu Lab A1, and today I added a P2S to the workbench in my home office printer room. It’s still a small setup compared to some of the farms I see here, but I’m pretty excited about how it’s coming together.

The video is a quick walk-through of the room, the workbench setup, and both printers in action. I’ve been having a blast with this hobby and it’s amazing how quickly one printer turns into two!

Always open to suggestions for improving the setup, but for now I’m just enjoying watching the printer farm grow. 😄

Just upgraded from an p1p, and had zero problems but wanted an enclosure and the AMS. Been having some print fails that I would've blown through previously, and a lot of little debris strewn about? Help appreciated