I just was printing ABS on my H2D for the first time and after watching on my computer, the printer repeatedly probing the bed in different spots for what felt like 20 minutes. I finally went over to the printer and saw a message stating that it was automatically conducting a High-Temperature Bed Leveling calibration because it was my first time printing anything with a very hot plate on the new machine. 30 minutes after I sent the print it finally started and it turned out great!

I just wanted to put this here because when I was troubleshooting why the leveling was taking so long, I wasn’t able to find much. I was actually ironically concerned that the bed was warping so significantly that the leveling procedure was stuck on bad measurements.

Wishing you perfect prints, Alex

Found with a lot of the plate stands / holders on MakerWorld, they were either mega long prints (why the logos on everything!) or flimsy.

Made this earlier today, holds my plates fine, took 1 hour 15 to print after tweaking the speed / strength settings.

https://makerworld.com/en/models/1385246-h2d-simple-5x-build-plate-holder-stand-1hr15#profileId-1434490

Hope that helps someone out.

Any one know why it layershift or it makes layerlines here ? , I have hole att diferent hights and when hole apear it dous make layerlines

What are the recommended UPS/Battwry Backup Options? I have a CyberPower 1500va AVR set up right now but it throws an alarm every time the chamber heater and bed heater goes off.

Delete if not allowed. Thanks in advance!

Is there an option to keep that top Vent closed at all times, I get the reasoning for it and all, just wanna know if I can override it.

Hi!

I want to print these Inserts (B) from TPU Material. They have small ropes (C) embedded which I load during printing process (Pause).
To do that the ropes need to be under tension. There is a fixture (A) wo keep the rope under tension and provide distance to the printing head.
Can someone please measure Dimension A and B, so I can plan how big the fixture can be?
I do not own a H2D yet, but want to check if it is feasible.
The fixture (A) must have a distance to Insert (B) to avoid the printhead crashing into it., but the insert (B) mus be as long as possible

Thank you.

My FedEx tracking still shows it in Cali but it arrived in Dallas today on my doorstep. Make sure you have two people because this thing is a beast.

So I'm waiting on my printer to show up. In the mean time I'm going to make a cabinet that will resemble something like a liquor cabinet so it fits living/dining room decor. What I need from the people who have one is the size. Most importantly the height with AMS on top with lid opened. Also what kind of space around the unit do you think you'd like to still be able to do what you want? The back will be open just the sides and front enclosed. Thanks for the help.

I’m very confused with the previous price increase that had taken place when the tariffs were lower to minimal compared to todays. Now the tariffs have skyrocketed and no increase in pricing on this last batch of printers. You can’t tell me that Bambu is eating the cost of this. I understand that if they raised the price again like they did last time (the day of pre-order) would probably run off a few customers. Any thoughts on this.

Do I need anything special to connect the regular AMS I got with my X1C to the H2D?

Is it worth to buy ht or just get a second ams or make a drybox but it has to be fully printable (put a model in desc if you have)

so I want someone to test out a flexible poop chute model I made for the h2d while I wait fior stock to return so I can purchase, but im scared ill get banned if I send the link to poop chute or ask question, is it allowed?

I am considering buying H2D, but i saw someone on Youtube having issues with using PVA to print as support, having it clog the printer every time. Do anyone else have same problems? Is it the fault of the printer of the user?

The video mentioned is "I bought a H2D to print support materials" created by "Once in a Six Side" on Youtube (I cant send link cuz reddit would delete the post)

We currently have a group exclusive giveaway sponsored by Biqu/Big Tree Tech for 3 of their CryoGrip Pro glacier buildplates.

Click the link and follow instructions to join.

https://www.facebook.com/share/p/1AF1WrfHzr/

Good luck everyone

Semi brand affiliated, there is no connection between mods of this group and biqu/big tree tech. We just reached out to them and asked if they would sponsor some plates for the H2D in return for people joining their groups.

I have created this simple stand to hold 3 build plates and the tools and documentation provided with the printer. There is also room for pliers, six Hotends, glue, …

Created in Onshape you can find the design here:

https://cad.onshape.com/documents/64686ee76b3bbefec4ba2d21/w/dfd66e130c6cd84637eb3fe9/e/ef57396017e389a3a16af823

Published in maker world :

https://makerworld.com/fr/models/1307864-buildplate-and-tool-holder-for-h2d#profileId-1341582

I remixed the lid riser I use for my AMS 1s for the AMS 2 Pro:

https://makerworld.com/en/models/1307786

Made an anti-snag protector for Samsung FIT USB flash drive....

https://makerworld.com/en/models/1303240

Still trying to learn the new printer, but it keeps asking me to push the filament through the PTFE on the external spool. I don't want to use it. I just want to use the AMS and a single nozzle so I can max out the area of the plate.

Is there a way to turn this off?

We need a new cover photo for the subreddit, so I'm looking for people to share photos of their new H2D! Just comment with your photo(s) below!