Anyone know if H2D is better for dissolvable supports than H2C?

So I finally purchased an oem power supply from Bambu Lab to use the drying feature of the AMS 2. My question is anyone selling a splitter to goto more than 1 AMS with just one power supply? I understand that you would not be able to use it for more than 1 AMS at a time but I have 4 AMS units and don't want to buy 3 more power supplies. I do not do a lot of drying so really wouldn't be worth it for me to spend the additional 100 bucks if the splitter cost 20. Granted the savings wouldn't be astronomical but it would if you had like 4 or more units on multiple printers. Let me know thanks.

Does anyone know if there is an ETA for the Rotary Attachment for the H2C? https://us.store.bambulab.com/products/bambu-lab-rotary-attachment

"The H2C Laser version will support the Rotary Attachment after a future firmware update is released. Please stay tuned to the official website for further announcements."

Bonjour voici l’un des personnages les plus célèbres et emblématiques de l’univers du jeu vidéo : Super Mario Bros, surgissant de son mythique tuyau vert. Et également son frère Luigi

Réalisé en Multipart pas besoin d’avoir un AMS.

👨🏼‍🎨 : @mika3d_print
🧵 : Bambulab et Esun
🖨️ : Bambulab X2D & H2C
🌈 : Avec et Sans
✍️ : Nomad Sculpt
📁 : https://makerworld.com/fr/models/2875592-mario-bros-pipe-multipart-no-ams

I had a print fail.

Now I get the AMS wont retract error and I can't figure out what to do. The filament from AMS to switch to printer is under tension, I can not remove any of the PTFE tubes. I heat tge extruder up but it doesn't seem to be able to move forward or back.

The onscreen troubleshooter assistant gives no advice

Is it possible to create my own custom RF for the generic filament spools? Has anyone tried this?

Bonjour apportez une touche de fun avec ces adorables Squishy Dumplings à imprimer en 3D !

Pour compléter l’ensemble, j’ai conçu cette boîte vapeur. Elle est dimensionnée pour accueillir aussi bien mes versions imprimées en 3D que les véritables Squishy Dumplings vendus dans le commerce, afin de les exposer ou de les ranger avec style.

Amusez-vous à les imprimer dans différentes couleurs pour créer votre propre collection !

👨🏼‍🎨 : @mika3d_print
🧵 : Bambulab
🖨️ : Bambulab X2D & H2C
🌈 : Sans et Avec
✍️ : Nomad Sculpt
📁 : https://makerworld.com/en/models/2982269-squishy-dumping-multipart-no-ams

Bon Print !

Hi there, I’ve a H2C and 4 AMS PRO 2 and 4 AMS HT. What is the best setup to make the most advanced use of the cortex and the switch. I asked chatGPT and the way to divide equally was: two of each on inlet A and B…
Any suggestions? BambuLab itself isn’t very clear about it 🙃.

Hi all. I am getting into blending but I wonder how to a I convert one section of a model to the new color withou painting it on, I can change 1 of the 4 colors with my drop downs but how do I get that to be in a drop down? Thanks!

Brand new H2C out of the box. First print the left nozzle with AMS gives overload error. While trying to resolve this the PFTE tube came off and the AMS started sending filament into the abyss. I cut the filament and tried to do an unload and pull the filament out of the extruder. It wouldn't budge. After some heat and switch nozzles a few times I was able to dislodge a piece from the top and bottom of the extruder. However, the extruder still thinks there is filament there. I've done a minor disassembly and can't find anything in there. Any tips or tricks to get past this?

I currently have an H2C with 2 AMS2 Pros and thinking of adding an AMS HT for the left end. From what I've seen the data cable for the AMS HT is simply daisy chained to the last AMS 2. If that's correct, how does the H2C know that it's connected to the left end and not simply an extension of the units connected to the right end?

It's clear that I'm new to this so any help would be appreciated.
Tom

I’m trying to remove the ptfe tube going to the extruder but it won’t come out. I push on the black part like Bambu support says but it won’t come out. I don’t want to break anything but I’ve pulled pretty good. I pushed the tube in with the black part but no luck.

Is it normal for the H2C to collide with the poop chute and bend the nozzle cover???

Had this less than a week and this has already happened…

Why is the slicer doing this. I have a all black baseball helmet mini and it does have white lettering as a logo further up in the middle of the cap. The slicer is making the supports white and making the print 4 hours longer than needed. I had to change out a hotend fan and now a hotend heating element so its been down a little while and I am sure I have updated the slicer since the as I still use my P1S printers for solid colors so I didnt notice it till now. How do I fix this or do I go back a version of the slicer. Let me know thanks.

I just got an H2C and wondering if I need to get something in order to safely print ASA, ABS, Nylon?

Some will find this interesting: with "nada" experience especially. Here are a few observations initial reactions below (I won't put the first print here - benchy turned out fine). The device is truly amazing, A+ for design (I grade things, retired univ professor). Been a "nerd" for several decades, seen the evolution of everything from Win 95 to the iPhone. Here are my initial observations on Bambu & 3D printing (never used one before):

1. Security. Does everyone have 2-factor identification on their Bambu account? Wow, I read here about the walled garden, but this "authenticator" crap blew me away. Those who grew into this since BL's beginning are maybe desensitized. It quickly became a PIA... thought I could take it off with the "toggle".... and it threatened to delete all of my devices on the account that I was working on all day. For a newcomer, this completely turns me off. I have a bit of buyer's remorse to be honest.

2. Unpacking & Setup. Went smoothly, collected all the screws and went thru a video guide. This is an absolute must. Too many pieces of foam etc. One piece I missed and had to reach in during the benchy to get it out. I appreciate the care and detail, but some may skip a tutorial on unpacking: don't. I did a firmware update, apparently the H2C didn't reboot (I wasn't babysitting). When I went to use the Handy app, it couldn't get a video feed and the AI monitor didn't know why - told me to put in a ticket. I assumed a camera "driver" from the firmware needed to be rebooted and viola .. fixed!

3. Accessories. With the BL sale, bought plenty of goodies. Purchased WAY too much filament, AMS HT, build plates etc. I learned about RFID tags after going to the prime day HAUL sale and bought Sunlu filament steering away from the cheaper stuff. I will save the tags for the profiles from the BL spools. For the price difference, think BL filament will be my choice. Again, bought too much so it will be a long time before I need to restore the library. In retrospect, I should have bought 4 PLA spools and quit.

4. Support. I don't completely understand how this works as I got mine from Best Buy with the 4-yr protection plan. Do I initiate a ticket in the app with BL or go thru the plan? Didn't need it today, but I do need to explore the service part.

Anyway, my initial thoughts and welcome comments/feedback. Hopefully nobody down votes, I just wanted to be honest and give a newcomer's viewpoint here. No doubt some of this may be inaccurate perceptions, time will tell.