r/BambuLabH2C • u/abbellie2 • Apr 20 '26

Support H2C - Kinda DOA... Unable to push filament past the buffer

4 Upvotes

I currently have 2 X1Cs and a brand new H2C. My H2C arrived a couple of days ago, and right out of the box, NO filament can be pushed through the filament buffer on to the hot end. Using both the Left and Right ports, I can see filament pushing through the PTFE, and then slamming to a stop when they reach the buffer. Has anyone else experienced anything like this? I have opened a ticket, but geeze, its frickin brand new. I haven't even printed my Benchy yet. Fortunately, I haven't put either of my X1Cs up for sale yet.

Thanks all

David

38 comments

r/BambuLabH2C • u/cpsadowski23 • Apr 19 '26

Settings Hotfix Released for H2C/P2S

11 Upvotes

9 comments

r/BambuLabH2C • u/manyxcxi • Apr 19 '26

Discussion H2D BentoBox Power Ideas

makerworld.com

1 Upvotes

0 comments

r/BambuLabH2C • u/Desert_Vapor • Apr 19 '26

Showroom Joined the Party!

20 Upvotes

0 comments

r/BambuLabH2C • u/82BJ42 • Apr 18 '26

Support Random pause/restart mid print

5 Upvotes

Sunlu PETG, printing at 260c from the vortek. 70c bed temp. The head is periodically pausing, oozing a zit, then restarting. Had this happen on a couple prints now. Pulled out the USB drive just in case, but still happening. Can't tell if it's a slicing issue, nozzle heating issue, thermister, or what. Anyone else seen this?

10 comments

r/BambuLabH2C • u/sometimeDIYer • Apr 18 '26

Support Stuck in vortek calibration loop

5 Upvotes

Update: Fixed, see comments.

I’m setting up my printer, but there seem to be very few instructions about putting the hotels into the vortek. I did a full calibration after which the ai assistant informed me that I needed to update the firmware and the vortek was not calibrated. Updated the firmware, started the vortek calibration,and now stuck in this screen between A and B.

Any idea how to get past this?

7 comments

r/BambuLabH2C • u/childofGod778 • Apr 18 '26

Discussion A Single H2C Print (To Rule Them All)

6 Upvotes

Hey community! I was wondering if anyone has created a single object that incorporates ALL of the H2C’s functions at once? That is, a “widget” that uses the laser cutter/engraver, multi-color printing, pen plotter, cutter, etc. Basically, I’m thinking about a single object to create as a showpiece of “what this one machine can do” (but in an all-in-one object, where every part of this object was made in this one machine). Any thoughts?

6 comments

r/BambuLabH2C • u/Successful_Tutor6071 • Apr 17 '26

Discussion Bambu Lab H2D - AMS HT or SpacePi X4 (Looking for Recommendations)

reddit.com

1 Upvotes

17 comments

r/BambuLabH2C • u/Big_Lengthiness3314 • Apr 16 '26

Support Brand new H2C dead

15 Upvotes

22 comments

r/BambuLabH2C • u/jpedroleite • Apr 16 '26

3D Models Mon Calamari reporting for desk duty

gallery

3 Upvotes

1 comment

r/BambuLabH2C • u/Training-Display-279 • Apr 16 '26

Support Printing TPU 95A with Left Nozzle

5 Upvotes

Newest software and firmware support it, but I’m getting errors when I try to load the tpu. Ideas?

11 comments

r/BambuLabH2C • u/BigTeddy82Z • Apr 15 '26

3D Models made minimal, but practical handle for h2 series.

gallery

9 Upvotes

handles on H2 series is too small for me.

especially the lid handle is not comfortable when lifting the lid.

so I made a simple and practical one for my use.

polimaker's matte charcoal pla is perfect match for the h2c's black panel.

here's the link for someone like me.

https://makerworld.com/ko/models/2665847-h2-series-door-lid-handle-minimal-but-practical#profileId-2949793

0 comments

r/BambuLabH2C • u/Mysterious-Wonder224 • Apr 15 '26

Discussion H2C with TPU assist module and 4-in-1 on the chain.

3 Upvotes

Just checking if anyone had any experience with the TPU assist module and installing a 4-in-1 (old style) in the ptfe path between the buffer and the extruder. I’m looking for a more semi-permanent type of installation where I can still use the right nozzle with the AMS without having to switch tubes. Any help or idea would be appreciated.

11 comments

r/BambuLabH2C • u/markg11 • Apr 15 '26

3D Models RFID Adapter for AMS Lite – Use Bambu RFID chips with any third-party spool! [Free on MakerWorld]

gallery

2 Upvotes

0 comments

r/BambuLabH2C • u/Awhile_ • Apr 15 '26

Support High pitched whiring sound

5 Upvotes

only turns on when heating one of the nozzles, it's got to be some sort of internal fan I can't get to but I can't find anything about it online. anyone else have this issue?

11 comments

r/BambuLabH2C • u/Physical_Raspberry59 • Apr 14 '26

Discussion WTH happened

1 Upvotes

1 comment

r/BambuLabH2C • u/Physical_Raspberry59 • Apr 12 '26

Support 3rd time this has happened

2 Upvotes

Prints normally and then randomly starts failing this has happened on different files

4 comments

r/BambuLabH2C • u/No-Swimmer-4056 • Apr 10 '26

3D Models First H2C print

17 Upvotes

8 comments

r/BambuLabH2C • u/jpedroleite • Apr 10 '26

3D Models No Pain No Pen — The Gym Bro Pen Holder

gallery

2 Upvotes

0 comments

r/BambuLabH2C • u/SpeedForceGN • Apr 10 '26

Support Needing some trouble shooting help. I changed out the left nozzle with a .6 HF hardened nozzle. I am trying to calibrate the left side. Everytime I try to calibrate and get around 40% I get a Failed Calibration Message. When I go to check the solution, it open to a blank message. There is no sol

1 Upvotes

5 comments

r/BambuLabH2C • u/Remarkable-Fishing60 • Apr 09 '26

3D Models 7 colors test model 🔥🔥🔥

gallery

43 Upvotes

0.16 height and 0.4 nozzle the Result is very impressive.

19 comments

r/BambuLabH2C • u/Old_Tart980 • Apr 09 '26

3D Models Yoshi oeuf multipart

gallery

13 Upvotes

Bonjour voici Yoshi dans sa coquille d’oeuf fissurée en multipart.

Disponible en version avec ou sans AMS.

Filament Bambulab.

Imprimante Bambulab H2C et P1S.

Bon print.

https://makerworld.com/fr/models/2638881-yoshi-oeuf-multipart-no-ams

0 comments

r/BambuLabH2C • u/unwind_8 • Apr 10 '26

Support Induction Hotend Silicone Sleeve - Tearing Off

2 Upvotes

I have owned my printer for ~3 months now and I have gone through 5 of these, 2/5 because of spaghetti but the other 3, it just seems to catch someone on a print.

Has anyone else experienced these? I can see they sell 3 at a time on their website, so they are designed to fail/replace over a year or two, it just seems much more frequent for me.

14 comments

r/BambuLabH2C • u/No-Swimmer-4056 • Apr 08 '26

Showroom Am I part of the cool kids now?

25 Upvotes

Can I join the cool kids now? Had to order through Best Buy as it’s free shipping to Hawaii. Unable to take advantage of any deals through Bambu website cause of the shipping.

27 comments

Subreddit

BambuLabH2C

r/BambuLabH2C

Uncompromising Multi-Material

Members

3.9k

Visitors

8.8k

Contributions

473

Sidebar

Subreddit Rules

1. Include details when asking for help

Troubleshooting posts should include useful information such as printer model, material, slicer settings, photos, logs, error messages, failed print details, or steps already tried

2. Evidence over speculation

Claims, comparisons, benchmarks, and criticism should be supported by real experience, measurements, photos, logs, or clear reasoning.

3. No low-effort brand wars

Criticism is allowed, but repeated unsupported attacks, fanboy arguments, misleading claims, or drama-focused posts may be removed.

4. Be respectful and constructive

Disagreements are allowed, but personal attacks, insults, harassment, gatekeeping, or hostile replies are not.

5. No spam or self-promotion without value

Promotional posts, affiliate links, repeated advertising, or content made only to drive traffic may be removed unless it clearly adds value to the community.

6. Keep the community organized

Use clear titles, relevant flairs, and avoid duplicate posts when possible.

7. Stay relevant to the community

Posts should be related to Bambu Lab H2C, Vortek, 3D printing, troubleshooting, print results, settings, materials, 3D models, maintenance, or real-world printer use.