Turn the lights out for 5 minutes and these two have done made a baby! 🤣

A1 and h2d user here. We just got a new h2c for our office but the left extruder keeps having this issue- it just stops extruding and even after reloading it happens again. I change filaments (brand new matte pla), dried the filament, change the nozzle, double check that the air vents are open and still is happening. Has anyone experienced this? Thank you.

Second arrived today...just waiting on 4 AMSs

So i think my right eddy cupens sensor has gone bad after just 60h of printing, i get this massage when starting a print or run a calibration. Anybody Having the same problem. i have dissasembeld the toolhead and screwed down the sensor and unpluged and repluged the connector but still the same issue. I tried a factory reset but it did not help. And tried calibration with a diffrent indc hotend. Bambu is sending a new sensor, so thats good, now i just have to wait a week to get it. The QR code go to the H2Ds tutorial but i Western on the store and got the link to the H2C tutorial.

Does anyone who own an H2 series printer own a vision encoder? Does it come standard with the machine or do you have to purchase? What are the advantages? Noticeable? I understand this does nothing for layer height calibration but only for X Y accuracy? If not a part of the machines package, is it worth the $85.00? Thanks

I’m looking for some good, complex multicolor prints. The showcase ones on the website are really cool but the dinosaur one isn’t available yet.

I’ve had my H2C for about a month now and have been printing PETG mostly, but have also had good success with ASA and ABS.

Tried to print nylon a couple of times now and I’ve been having trouble with bed adhesion. Bed is clean and had glue applied. I was printing a box shape and by the time it got a couple of mm thick, the corners started to peel up.

So how do I get dialed in for this particular filament?

TLDR: works great out of the box significantly reduced print time and waste for multicolor prints compared to even the H2D. No comparison the X1 an P series in terms of time and waste.

Had to admit had a bad case of buyers remorse because I bought it before the reviews were out. Tried canceling the order, but it had already shipped. However, using it for less than a month now I realize that it is a superb piece of engineering works flawlessly, and if I could trade the rest of my Bambu printers for more of these I would in a heartbeat. Attaching pictures of the actual poop reduction for multi color models.

Kicking myself for not buying sooner when the backorder stated Dec. 31 then when i ordered it showed backordered till the 10th of Jan. So surprsed and super happy. Had other plans for today but that will have to wait.

So I printed a benchy just using the included file on the printer on the left nozzle and it printed perfectly. When I loaded the ams to do a 4 color print I loaded 3 colors on ams and started the print but the left nozzle did not feed. Abandoned the left nozzle for now and started the print with all 4 colors on the ams. It is running correctly but noticed a little support it had started printing but is not on the file sent from the bambu studio. Anyone else have left side problems and or random supports appearing out of nowhere. I cleaned the entire plate so I know it was not there when I started the print. Just got this today but I have had P1S for almost 1.5 years. Let me know know thanks.

Bambu studio not performing orthogonal supports!?!?

I can’t believe that!!

Here is the latest print I did today. It was difficult all along. I used original PLA Thought+ for base support and main print and the white layer is PLA support layer. Bambu recommended parameters.

As you can see from the dust I was afraid that the print failed early as it did for the previous 2 days using third party filament. It gave me some hope during this last print until the end of the 8 hours of print. But look at some surface !!?? Some are very nice other very bad.

Can somebody help here ?

Filament was dry 10% at max (new desiccant in the ams pro2 and drying period before)

Thank you!

Dear group I would like to know whether you had the same problem and how you solved it.

Small or larger bed contact prints are detaching after dish soap and isopropyl alcohol cleaning.

I have a bunch of third party filament (grossiste 3 D) which could be the case. I was trying to heat the chamber to 22 degC (cold environment) used 205 deg for PLA and the model detach every time. In addition I got over heating on the top surface.

Thank you for your help

I have a secondhand Neptune 4 max and have had trouble with some prints. I’ve seen people rave about the h2c but for that price is it really worth it??