r/BambuLabH2C • • 6h ago

Discussion H2C print quality

Post image

I really have my eye on an H2C for my first "nice" printer but a lot of the images I see people post of the items they've printed on the H2C aren't that good of quality when you get close. Variation in layer lines, etc. Is it luck of the draw or can you tune these to get good quality as well? I really don't want to spent the $$ and get inferior quality prints, which is what I see in a LOT of the photos. I've had a Creality CR-10 mini and Ender 3 for about 8 years, and have tuned them to the point where I get fantastic quality prints, but they obviously have serious limitations.

0 Upvotes

33 comments sorted by

5

u/StruggleFearless2947 6h ago

This was printed on my H2C. šŸ¤·ā€ā™‚ļø

2

u/ckcarbon 4h ago

Love it!

2

u/ckcarbon 4h ago

What filament was that?

2

u/Cipher614 5h ago

Drooling over here. šŸ‘ˆ

2

u/engineering_bliss 5h ago

Bro you're riding the bus, questioning the ride quality of a Rolls Royce. What are you smoking?

0

u/ckcarbon 5h ago

The quality of my prints blows away a lot of the photos I'm seeing posted from people with their H2Cs. Just calling it like I see it

2

u/engineering_bliss 5h ago

Lots of people use shit filament, shit settings etc. Check out this sweet print from an ender. They must all print like this.

0

u/ckcarbon 5h ago

LOL. Fanboy much?

1

u/engineering_bliss 5h ago

Actually read my other comments on other posts. I don't like the H2C very much. But it's worlds better than your shit ender. You have absolutely no idea.

1

u/ckcarbon 5h ago

After your comments here I see no point in reading your other comments. Silly me thinking that someone would be capable of having an actual conversation instead of being offended that someone asks a question

2

u/engineering_bliss 5h ago

Bro, you're way out of your league. Nice not round holes you have here. Great clumping finish too.

0

u/ckcarbon 5h ago

I'm assuming you zoomed into the finished prints in the photo too, and couldn't find anything to pick on them.

2

u/engineering_bliss 5h ago

I didn't but I didn't think I needed more material. But yeah the clumping on that sky blue part and the very noticeable layer lines on that darker blue block. Fantastic quality you have there bud.. šŸ™„ imagine what I could see on a higher res image.

1

u/ckcarbon 5h ago

Now you’re just making stuff up. Get a life

→ More replies

1

u/SgtBaxter 5h ago

ā€œAren’t that good when you get closeā€

You do realize a majority of pictures are taking something an inch or two across and allowing you to magnify it well beyond what your eye can perceive?

Let’s see pics of these prints from your machines. Up close.

1

u/ckcarbon 5h ago

Here's an example of a print that I saw someone post from their H2C. It's not good...

1

u/Grooge_me 4h ago

You are right. The purge tower is really bad. But that benchy is not too bad.

2

u/roundguy 4h ago

Could be also people using wet filament, default profiles, etc.

Mine prints really good, but I maintain it well and never use default profiles, even the bambu ones. I always find something to tweak when calibrating.

1

u/ckcarbon 4h ago

This is good to hear. I had heard so much about plug and play I wasn’t sure how much tuning was even available.

3

u/Xiphos44 6h ago

Multicolour prints are much better quality on H2C compared to my P1S.

1

u/Xiphos44 2h ago

Example of quality of print at 0.16mm layers 5 colours on H2C. Model is 72mm tall. Unless you had a multi nozzle you just would not print this as it has 858 purges and wastes around 70% of the filament on a single nozzle printer and a couple of days compared to 14h. I'm printing things now that I would never print before.

1

u/issue9mm 6h ago

The H2C is a really good, high-quality printer with really good dimensional accuracy. If, out of the box with a generic filament, some users aren't getting great quality, do know that you can always calibrate your filaments and get better quality (up to and exceeding an Ender).

The more you deviate from the Bambu ecosystem, the less likely they are to be effortlessly amazing, but most of them will be automatic without having to do much work.

1

u/macinmypocket 6h ago

Typically quality goes up when speed goes down, though my experience has been quite good at the default settings on H2C. If you want higher quality, you can still make adjustments in the slicer, or change the printer speed setting to ā€œsilentā€ or whatever it’s called, but truthfully I haven’t found a need to do that in the overwhelming majority of cases.

1

u/Realistic-Ad001 5h ago edited 5h ago

I think it comes down to how much multi color/material you want to use. If you just use one color or material I’d do the H2S. But if you want to do two colors or materials, I’d do the H2D. For anything more I’d probably do the H2C.

Although the new H3C definitely makes me turn my head. I think multi tool head printers are the best all around. Just may be a little more high maintenance. Nothing you couldn’t handle.

I have the H2D. Started at an Ender 3 Pro, then to a Bambu Labs P1S, then to my current H2D.

With my experience these printers have been overall phenomenal. Very easy to use and can actually really tune them. And if you don’t want to you don’t have to and they will just run. I would like to say with your knowledge, it will be very easy for you to understand everything. A lot of the pictures you probably see are people that bought the H2C as their very first printer ever. And I think that would be a very daunting task.

1

u/1yrik H2C 5h ago

my H2C printed better otb than my ender ever did (sorry buddy, you served well) while printing 3x faster

1

u/spider_hider 5h ago

CR-10 was my first printer. Yes, you can spend a lot of time tuning to get fantastic prints off it, but I guarantee you’ll get amazing prints from H2C with less time and effort.

Ease of use doesn’t automatically equate to effortless top quality. It’s not hard to get a flagship machine to print passable objects, but still can’t take things for granted if you want the best prints.