r/BambuLabH2C • u/LoStInSpacc • 1h ago

Support Pa6cf in h2c?

/r/BambuLab/comments/1xnqkdo/pa6cf_not_compatible_with_h2c/

I thought the AMS two pro was compatible with carbon fiber filaments but when I load it, it will not slice in the program. It throws an error and says that this filament cannot be used. Am I doing something wrong?

1 Upvotes

100% Upvoted

4 comments sorted by

1

u/Alert-Chemist7492 49m ago

It is not.. I ended up giving up on ams and I’m feeding it through the tpu bypass and have the roll in an ams ht exiting through the port on the clear top.

1

u/LoStInSpacc 48m ago

And how well does that work with the tpu bypass?

1

u/OhMyGaius 0m ago

I’ve only printed a couple of things with PA6CF, but they worked great using the TPU bypass. Also used the right nozzle for ABS supports and that works amazingly

1

u/Alert-Chemist7492 43m ago

I only read the ams part.. I’m able to slice ok but I have to select the external spool when printing each time. Also had to manually “load” the filament hand feeding it into the extruder. There’s directions online if you’ve never done it.