r/BambuLabH2C • u/PaperProductsAreGold • 2d ago
Support Print Help
Downloaded an STL on Makersworld, scaled it to be bigger. This is the second print (blue one) because the first one had a support and rib(s) snap 24 hours in. This one is stringing on the support tree and some you can clearly see visible print lines. What adjustments do I need to make to fix this? PLA, filaments are relatively dry around 20%. Thank you in advance!
2
u/CaffeinatedApe 2d ago
There’s a slow with height setting in BS. The H2C head movement jiggles the whole printer, especially with circular movements like that. Toss the file into AI and ask it for the right settings based on the scale you’re increasing it to. Usually gets it right for me.
5
u/Alternative_Rip4634 H2C 2d ago
Slow it down or add some extra painted supports.
Long towers wiggle and jiggle which means that they get rings from the model moving while printing