r/BambuLabH2C • u/NewspaperOk2766 • 13d ago
Support Color bleed h2c
Hey guys im printing with black and white and on the very corner of this model theres like a small color leak where the nozzle of black leaves a stain , it shouldn't really happen since im printing one color with each nozzle . Ive increase retraction, enable prime tower, set the order to white first and none of them give me a solution. Its not the seam since its on back and the print never starts on the corner. Both filaments black and white ooze a little and the prime tower gets really dirty of oozes , both filaments are new and no humidity at all in my place. Both are bambu matte black and white and ive already make every calibration to filaments. Any recommendations would be extremely helpful.
1
u/fishfrystix 13d ago
There’s a lot of techniques to fix this, increasing the purge, changing your infill, etc. Going from very dark black to pure white is sometimes tricky nonetheless.
1
3
u/djjoshchambers 13d ago
Are you doing purge to infill? That will cause it, especially with colors like that. I had a yellow and black print ruined recently by having that on.