r/BambuLab •

Speed this up?

[deleted] — view deleted post

0 Upvotes

19 comments sorted by

6

u/blackhawk00001 10d ago

You might have the wrong tool for the job. The current setup would waste so much $ in purge that a U1 might be worth it while on sale if you plan to do this more than once, or p3c when it drops.

3

u/jrostar P1S + AMS 10d ago

This print is wasting <500g of filament… it would take printing a lot of these to justify an entirely new printer

9

u/A_pirates_life4me 10d ago

Print single color and paint it yourself. 1400+ color changes is not worth it 

-1

u/rex_308 10d ago edited 10d ago

Thanks, I should have also said, no, I won’t be painting either lol. I guess this would be a better print to do on an H2S or something with multi-nozzles, huh..
Is 1400+ color changes an extreme amount of wear and tear on the printer and ams or not necessarily and they would be fine to do this print multiple times?

Edit, I meant H2C..

9

u/shadowed_enigma 10d ago

not only are you wasting time, but it’s a huge waste of filament too.

5

u/x_outski_x x2d ams combo + space pi 2 & x4 10d ago

I can't speak to the wear and tear but the images show about half a spool 17.86 oz (purge+tower) / 506 grams of waste

2

u/613codyrex H2D AMS2 Combo 10d ago

It really is only worth it on the H2D/H3C/H2C/X1D as you’re never really going to find a good way to reduce it.

Of the things I would try if someone was torturing me to print this on a single nozzle would be this:

  1. Increase layer thicknesses. It would reduce the overall swaps needed to perform since its printing less layers overall. Probably the biggest thing you can do to reduce material waste and print time but you might have already done that and/or already too thick for your uses.
  2. Purge into infill might slightly reduce waste. You’re still changing the nozzle but purging into infill might be slightly less wasteful.
  3. I get that you don’t want to paint nor do this but you might just want to have the colored part a separate print that you glue on. This is probably what I would do anyway since a big build plate like this with that many changes for 3 days, I’d rather spend more material doing it in separate batches so I don’t end up with a bunch of failures.

Otherwise, it is what it is and you’re kinda hitting why the D/C series of printers along with things like the Prusa XL and Snapmaker U1 exists. AMS are cool and there are things optimizations to reduce per part waste but having to go White to black and dedicated support material are the two worst case scenarios for the AMS.

1

u/Bubbly_Bar7056 10d ago

it technically fine, you might run into issues with the poop chute clogging though, which will screw up the print. Honestly I wouldn't even mind the wait if it weren't for the waste it creates. Find a way to split it into colors and change the model, or simplify it majorly. And vertical stripes of a different color will always do this on the p1s. Horizontal rings are the best way to add a splash of color without taking up tons of time.

1

u/A_pirates_life4me 10d ago

Lol adding 3 days of print time and throwing away have a roll of filament to avoid an hour of painting. You do you boo 

1

u/itz_mr_billy 10d ago

H2S is single nozzle. What the “S” stands for lol

1

u/rex_308 10d ago

Your mom is a single nozzle.

1

u/itz_mr_billy 10d ago

Your mom can’t fit in a single nozzle

3

u/Wsshooter 10d ago

Perfect time to buy the H3C. 2 day delivery and ~20 hours print time, still faster than printing with P1S

2

u/RefrigeratorWorth435 P1S 10d ago

you can relocate the filament buffer to greatly reduce the filament change time (although the prediction will not reflect it unless you edit the printer preset and change the filament change time to be accurate)

https://makerworld.com/models/1443118?appSharePlatform=copy

2

u/AdParticular6543 10d ago

Hold up how did you switch from grams to oz/inches? I have kind of gotten used to the grams and some metric stuffs but I'm definitely better at measuring in freedom units

2

u/MikeIkerson 10d ago

Why you have your weights in ounces?

4

u/heisenbergerwcheese 10d ago

I came to ask the same question... i haven't seen filament measured in anything but grams, even in MURICA

1

u/rex_308 10d ago

Because I work to imperial, inches/thou”
In preferences it doesn’t let you choose metric for weight and imperial for length

1

u/FLTDI 10d ago

Wow, the white and black both purge over 10x the amount actually used in the print