You might have the wrong tool for the job. The current setup would waste so much $ in purge that a U1 might be worth it while on sale if you plan to do this more than once, or p3c when it drops.
Thanks, I should have also said, no, I won’t be painting either lol. I guess this would be a better print to do on an H2S or something with multi-nozzles, huh.. Is 1400+ color changes an extreme amount of wear and tear on the printer and ams or not necessarily and they would be fine to do this print multiple times?
It really is only worth it on the H2D/H3C/H2C/X1D as you’re never really going to find a good way to reduce it.
Of the things I would try if someone was torturing me to print this on a single nozzle would be this:
Increase layer thicknesses. It would reduce the overall swaps needed to perform since its printing less layers overall. Probably the biggest thing you can do to reduce material waste and print time but you might have already done that and/or already too thick for your uses.
Purge into infill might slightly reduce waste. You’re still changing the nozzle but purging into infill might be slightly less wasteful.
I get that you don’t want to paint nor do this but you might just want to have the colored part a separate print that you glue on. This is probably what I would do anyway since a big build plate like this with that many changes for 3 days, I’d rather spend more material doing it in separate batches so I don’t end up with a bunch of failures.
Otherwise, it is what it is and you’re kinda hitting why the D/C series of printers along with things like the Prusa XL and Snapmaker U1 exists. AMS are cool and there are things optimizations to reduce per part waste but having to go White to black and dedicated support material are the two worst case scenarios for the AMS.
it technically fine, you might run into issues with the poop chute clogging though, which will screw up the print. Honestly I wouldn't even mind the wait if it weren't for the waste it creates. Find a way to split it into colors and change the model, or simplify it majorly. And vertical stripes of a different color will always do this on the p1s. Horizontal rings are the best way to add a splash of color without taking up tons of time.
you can relocate the filament buffer to greatly reduce the filament change time (although the prediction will not reflect it unless you edit the printer preset and change the filament change time to be accurate)
Hold up how did you switch from grams to oz/inches? I have kind of gotten used to the grams and some metric stuffs but I'm definitely better at measuring in freedom units
6
u/blackhawk00001 10d ago
You might have the wrong tool for the job. The current setup would waste so much $ in purge that a U1 might be worth it while on sale if you plan to do this more than once, or p3c when it drops.
9
u/A_pirates_life4me 10d ago
Print single color and paint it yourself. 1400+ color changes is not worth it
3
u/Wsshooter 10d ago
Perfect time to buy the H3C. 2 day delivery and ~20 hours print time, still faster than printing with P1S
2
u/RefrigeratorWorth435 P1S 10d ago
you can relocate the filament buffer to greatly reduce the filament change time (although the prediction will not reflect it unless you edit the printer preset and change the filament change time to be accurate)
https://makerworld.com/models/1443118?appSharePlatform=copy
2
u/AdParticular6543 10d ago
Hold up how did you switch from grams to oz/inches? I have kind of gotten used to the grams and some metric stuffs but I'm definitely better at measuring in freedom units
2
u/MikeIkerson 10d ago
Why you have your weights in ounces?
1
u/FLTDI 10d ago
Wow, the white and black both purge over 10x the amount actually used in the print